Page 3 of 5 FirstFirst ... 3 ... LastLast
Results 21 to 30 of 42

Thread: DIY: Shaving RBC intake manifold

  1. #21
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    Quote Originally Posted by echo3gulf View Post
    When you shaved down the spot for the map how did you put it back on? Thats and all the grounds where d they go if you shaved off all of the mounting spots?
    The holes I filled in with an aluminum welder then grinder back down. As far as grounds there is only one in the harness by the valve cover not on the manifold and you can easily relocate it when you tuck the harness.

    Sent from my SCH-I545 using Tapatalk
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  2. #22
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)


    There you go sir

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  3. #23
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    Damn I did good on that

    Sent from my SCH-I545 using Tapatalk
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  4. #24
    Junior Member echo3gulf's Avatar
    Join Date
    Oct 2012
    Location
    From Ohio but currently stationed in North Carolina
    Posts
    126
    Feedback Score
    1 (100%)
    Okay so just tap a hole in the bottom and just put a hose on it. Idk what all those other hoses sre tho.

  5. #25
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    Quote Originally Posted by echo3gulf View Post
    Okay so just tap a hole in the bottom and just put a hose on it. Idk what all those other hoses sre tho.
    He's boosted.... One for the FPR, one for waste gate, one for boost solenoid, one for map sensor and one for brake booster. I even have another one for a direct line to my boost gauge

    Sent from my SCH-I545 using Tapatalk
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  6. #26
    Junior Member echo3gulf's Avatar
    Join Date
    Oct 2012
    Location
    From Ohio but currently stationed in North Carolina
    Posts
    126
    Feedback Score
    1 (100%)
    ya makes sense I have a block off plate so everything just plugs into it. What dermal attachment did you use to shave the space between the runners???

  7. #27
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Quote Originally Posted by echo3gulf View Post
    ya makes sense I have a block off plate so everything just plugs into it. What dermal attachment did you use to shave the space between the runners???
    You can drill a bunch of small holes side by side, and then go over them again with a bigger bit. [MENTION=28]Spaz[/MENTION] would know what to do better though. That's just my .02 with a 2am state of mind.

    Also, are you going to port this yourself? Because you can't use a dremel for that

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  8. #28
    Junior Member echo3gulf's Avatar
    Join Date
    Oct 2012
    Location
    From Ohio but currently stationed in North Carolina
    Posts
    126
    Feedback Score
    1 (100%)
    yes I am, I understand that I already got me some sand paper the only thing is, is that I have to order me some flapper disks cause every hardware store around doesn't carry them.......

  9. #29
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    Cutting out the runners sucks lol I used a lot of drill bits. I didn't start with small one though I just went for it with big boys lol

    Sent from my SCH-I545 using Tapatalk
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  10. #30
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Quote Originally Posted by echo3gulf View Post
    yes I am, I understand that I already got me some sand paper the only thing is, is that I have to order me some flapper disks cause every hardware store around doesn't carry them.......
    Home depot, or walmart. But they'll likely come in packs.

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

Page 3 of 5 FirstFirst ... 3 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •