So like most I started out with a cold air intake, ran a catless exhaust, then ran a larger exhaust, then bought flashpro, then that was it time to get serious. Like most once you feel power from an upgrade you get addicted to experiment with different tunes different settings to get MOAR POWER.

I dynoed on a Dyno Dynamics and a base flashpro map with CAI, and exhaust but only made 177HP because it was untuned and way rich. Like 11.9:1 LOL that was FAIL! All you have to do is read

So I started learning how to adjust the fuel map with FlashPro and found a lot of other settings that help make more power HA! Imagine that!

After watching YouTube videos of boosted Civics and seeing those RPM's rev to fuel cut faster than I thought was possible... Yeah it was time to BOOST LOL

I started out with a smaller turbo build I pieced together consisting of a top mount log manifold and a small turbo like .63 AR turbine and .60 AR compressor. Modified my stock fuel injectors and started street tuning and ended up with 344HP on the same Dyno Dynamics.

When I couldn't get anymore power from those mods I decided to look at what I needed for more. My friends said "Dude you have a problem" I agreed with them... I don't have enough boost!

I did the whole build myself
(other than the machine work such as boring and honing the cylinders and fitting the oversized valves).

I welded my own intercooler brackets and welded my own 3" stainless exhaust. I tore down and reassembled the whole motor myself in my garage. I surprised myself when it actually started the first time HEHE

And it now has over 4000 miles on the motor

The only way I was able to do this myself was I had the service manual in PDF form for torque specs and reassurance I was putting things back where they go

I pulled the motor out in January 2012 and finished April 27th 2012

Car:
2008 Honda Civic Si 75k miles

Motor:
K20z3

Gauges:
AEM Digital AFR UEGO Gauge
AEM Digital Boost Gauge

ECU:
Hondata FlashPro

Boost Control:
Hondata Boost Control Solenoid

Exhaust:
Custom 3” Exhaust (No CAT)
Custom 3” Downpipe
Custom 1.75” Dumptube
DCSport 3” Muffler
Sidewinder T3 Manifold (I cannot mention the name until I see it fits)

Clutch:
Competition Stage 4 Sprung - Strip Series 1620 Clutch Kit
Competition Flywheel 11LBS 2-800-STU

Valvetrain: Pictures coming soon
Brian Crower Stage 2 NA Cams BC0042-2
Brian Crower Dual spring, steel retainer/seat BC0040S
Brian Crower 7° Billet Keepers / Locks BC2940
Brian Crower 35.5mm Intake (+.5mm head diameter) BC3042
Brian Crower 30.5mm Exhaust (+.5mm head diameter) BC3043
Hybrid Racing K-series Timing Chain Tensioner
Cometic Headgasket 87mm

BottomEnd:
CP Flat Top Pistons w/ ProSeal Ring set CP70456
Cylinders bored and honed
Blueprint H-Beam Forged rods (Hybrid-Racing) BPCRK2001
ACL STD Rods, Main, Thrust bearings
ARP Headstuds 208-4701
Mishimoto oil Cooler kit MMOC-U
Enginetech Gaskets with Fire Seal technology HO2.4CS-A


Fuel System:
Walbro 255LPH-HP Fuel pump
Injector Dynamics ID1000 fuel injectors
K-Tuned Fuel rail with AN6 45 degree fitting and 6ft of AN6 fuel line

Cooling

Mishimoto Radiator (MMRAD-CIV-06si)
Mishimoto Silicone Radiator Hose Kit (MMHOSE-CIV-06) Color Blue
Civic Si Mishimoto Racing Thermostat (MMTS-CIV-06)

Misc Parts:
K-Tuned Upper Coolant Housing (W/Hose Fitting) KUW-24-258
K-Tuned Intake Manifold Heat Shield Gasket KTG-K24-MAN
K-Tuned Idle Air Assist Delete Kit KTD-AA-DEL
GodSpeed 44MM RS-Series Wastegate WG-008
Turbosmart 45mm on standby TS-0506-1002
Treadstone Performance TR12 Intercooler:
• Core Size, 12.5" X 22" X 3.5"
• Supports 700+HP
Treadstone Performance Intercooler piping 2.5”
Injected Front and top torque dampeners
DEI Titanium Exhaust Wrap with LR Technology
Treadstone Performance T3 Turbo Heat Shield
HKS Blow Off Valve
Treadstone Performance Vacuum Distribution block
CX Racing Oil Feed and Return kit Oil-Kit-AN10-7PCS-AN10-S90
Hasport Rear Motor Mount U70A
Ingalls Stiffy Torque Damper

PICTURES

















































THE NEW:
































































3.14.2012 Welded brackets for the intercooler out 1/4 inch steel plate IT'S SOLID




It's even



Not feeling the oil cooler




3.20.2012 Block is back






Clearances are good


Hybrid Racing timing chain tensioner and belt came in




Mishimoto Radiator,thermostat and hoses










ASSEMBLY HAS BEGUN

New Lost Motion Springs






Not color coded... work with ya got







Hybrid Timing Chain Tensioner




New wheels





















PICTURES