Page 37 of 106 FirstFirst ... 27374787 ... LastLast
Results 361 to 370 of 1058

Thread: BoostedK20 Chat!

  1. #361
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    i also use pushlock lines and fittings. All the fittings are drilled/tapped on the bottom side of my rbc. However, i think id be careful with which line you use with the pushlocks. I had some cheap black line, and when i stored the car i noticed it became very flimsy (maybe the heat?). I could literally pinch the line with 2 fingers completly closed. Maybe this is part of my creep issue.



    Mmmm Thunder mug from Boston Pizza
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  2. #362
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0

    Re: BoostedK20 Chat!

    What kind of beer? A local car restaurant has a 43 ounce mug I love it!

    sent via spazatalk
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  3. #363
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)

    BoostedK20 Chat!

    Quote Originally Posted by boosted_teg View Post
    i also use pushlock lines and fittings. All the fittings are drilled/tapped on the bottom side of my rbc. However, i think id be careful with which line you use with the pushlocks. I had some cheap black line, and when i stored the car i noticed it became very flimsy (maybe the heat?). I could literally pinch the line with 2 fingers completly closed. Maybe this is part of my creep issue.

    I bought my line from jegs. It's black also but It's very sturdy. I can't close my line at all with my fingers.
    Tire slayer
    Breaking everything since 2011

  4. #364
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)

    Re: BoostedK20 Chat!

    Quote Originally Posted by Si Speed 317 View Post
    Since we're partially on the subject, how do I do a leak test? I have a vacuum leak (doubt its a boost leak) somewhere amd its making my car run odd at times

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  5. #365
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)

    BoostedK20 Chat!

    Quote Originally Posted by Si Speed 317 View Post
    Hard to say. I'd check over all my connections and hoses that run off my IM. Make sure you don't have any cracks or loose clamps. I believe I found out what my idle issue was and it was loose IM bolts and a loose connection to my vacuum block.
    Tire slayer
    Breaking everything since 2011

  6. #366
    Senior Member
    Join Date
    Mar 2012
    Posts
    802
    Feedback Score
    0
    I am going to use the same line I have on my WG to vacuum block. On the one with AN fitting did you teflon tape them?

  7. #367
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)

    BoostedK20 Chat!

    Quote Originally Posted by ksboi View Post
    I am going to use the same line I have on my WG to vacuum block. On the one with AN fitting did you teflon tape them?
    You only Teflon npt threads. AN fittings are designed to need no sealant.
    Tire slayer
    Breaking everything since 2011

  8. #368
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    43oz mug? Niiice! this is the biggest mug we could get here, and its coors light draft, nothing special haha


    as for the line, you got good line. The new line i bought is nice and sturdy also
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  9. #369
    Master Member
    Join Date
    Dec 2011
    Location
    Delaware
    Posts
    1,889
    Feedback Score
    1 (100%)
    Ya I think the largest in DE I've heard of is 25oz

  10. #370
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    i believe that mug i had is a 32oz
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

Page 37 of 106 FirstFirst ... 27374787 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •