Page 25 of 27 FirstFirst ... 1525 ... LastLast
Results 241 to 250 of 264

Thread: Adm_rsx's Rotrex build part DEUCE

  1. #241
    Senior Member fre$h si's Avatar
    Join Date
    Mar 2011
    Posts
    299
    Feedback Score
    0
    did u figure out the high rev? maybe it was a vac leak?

  2. #242
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Quote Originally Posted by Adm_rsx View Post
    I've been tuning the car over the past few days but for some reason I can get the thing to idle down for shit. It idles about 1700-2k. It's freaking stupid and I can't quite figure out why.
    signs of a sticky iacv.. maybe a good clean and lube will free it up

  3. #243
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    Quote Originally Posted by monjarassi View Post
    signs of a sticky iacv.. maybe a good clean and lube will free it up
    Iacv is disabled and unused man.
    Tire slayer
    Breaking everything since 2011

  4. #244
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    The Iacv is disabled and unused though.
    Tire slayer
    Breaking everything since 2011

  5. #245
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Might need to adjust the throttle stopper screw

  6. #246
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    Quote Originally Posted by monjarassi View Post
    Might need to adjust the throttle stopper screw
    I did that too. Haha. I can't stop thinking its in the tune. I have idle set at 1,000rpm.
    Tire slayer
    Breaking everything since 2011

  7. #247
    Senior Member vdubkilla's Avatar
    Join Date
    Apr 2011
    Posts
    914
    Feedback Score
    0
    Adam what intake are you using ?? is it an RBC and if so did you have to modify it / cut it ?? or was it already modified / cut ?? I had a similar issue when I first did my swap a few yrs ago, turned out the guy who I bought my swap from cut the RBC a little to much and it had an air leak causing a high idle .Have you tried spraying anything around the intake manifold mounting area to see if the idle changes any ? It sure sounds like you have an air leak somewhere to me
    Last edited by vdubkilla; 10-12-2012 at 09:28 PM.

  8. #248
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    Damn, i've been slacking with posting. Life hits hard sometimes. Glad everything is back together and the car is running well - mostly. Love the shot with you and Aiden working on the whips! Made me smile, haha.

    As for your idle, let's try to diagnose what the issue could be. Have you done a gas test to see if you have a leak anywhere?

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  9. #249
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    No I haven't done any diagnostics yet. I'm slacking. Lol. But not too much though. I went to the track tonight I get a few passes in to see how tuning was going.

    1st pass was horrible. I forgot how much the cars exhaust banged the bottom of the car and the car wheel hopped horribly. So I had to let out and I hoped back on it hit 2nd an it pulled nice. WOT shifted to 3rd and the car yanked right hard as shit. Let out, hit it again and it yanked towards the wall again so I coasted through the rest of the 1/4. Went a 16.204 @ 68mph. Hahaha. The track was oil'd down evidentially. A brand new 2013 Shelby cobra almost wrecked the next race after mine.

    2nd pass I was more prepared. And they prepped the track. Had to leave like I was at a stop light to keep the wheel hop away but managed to run a 14.0 @ 103. So I went in the computer looked at the log. Decided everything was still cool an that I just needed to shift faster.

    3rd pass was the winner. I had a decent launch for the track conditions and wot shifted 2-3 and 3-4 an turned out a 13.8 @ 103mph. So I ha hit my goal for the night I running a 13 sec pass all motor. Which is actually the fastest my rsx ever went while all motor. So FUCKYEA! Lol

    I was never so excited to see a 13 sec time slip in my life haha.
    Tire slayer
    Breaking everything since 2011

  10. #250
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    Quote Originally Posted by Si Speed 317 View Post
    Damn, i've been slacking with posting. Life hits hard sometimes. Glad everything is back together and the car is running well - mostly. Love the shot with you and Aiden working on the whips! Made me smile, haha.

    As for your idle, let's try to diagnose what the issue could be. Have you done a gas test to see if you have a leak anywhere?
    How have things been going man? And thanks man. He likes wing out there with me "fixing my racecar" lol

    As for the revving I haven't diagnosed or tried to yet. I've just been too lazy now that it runs.
    Tire slayer
    Breaking everything since 2011

Page 25 of 27 FirstFirst ... 1525 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •