Jotech Performance Review

Before I get started with this I want to say that I DO NOT exaggerate and have emails, quotations, & other people to back up what I'm about to say. Also want to say that this is strictly customer to business review.

First of all before I even hired Jo Tech, I researched and looked for a company that would be capable of fabricating everything that I needed. I found several companies but after speaking with Jo he really sold me. I needed the car to be completed within a 17 day period & he said "No problem."

I drove the car up to Kissimmee, FL on a Saturday morning and then flew back. I asked how long do you think he said, "Papa, I should have it done by next Sunday." I was excited and happy with my decision to take the car to them.

Rather than go through all the details, to make a long story short. It took them 5 & half weeks, I had a friend drop by the shop 2 weeks into the build & he said that the car hadn't moved and all the boxes were still in the car. After the 4th week I made a surprise visit up to see the progression of the car and to my surprise NOTHING had been completed.

I had to make a list of what had to be done, which is ridiculous because I paying you thousands of dollars to do your job. They only had the intake & header off. He kept on telling me that they didn't know that the flange was different....everytime I called it was another excuse. I'm not the type of customer to harass, I'm extremely patient & understanding. But they have caller ID up there and believe me they were avoiding my calls. I would have to call from different numbers just to get updates. They didn't post any pictures of my build until about 7 days before I picked the car up.

Needless to say after 5 1/2 weeks they realistically worked on the car for about 10 days and rushed the build. Then when it came to tuning the car it was another disaster. Supposedly Colombia from CMB, his brother passed so he couldn't tune my car & I was quoted to have him tune the car. Instead they had some retard named OMAR tune it. The car made power but Jo's exact words before I left the car there originally was "If you don't make 400whp then we have a problem." The car made "386 whp & 254tq". I put that in quotes because on the dyno here locally when I went to retune it, it only put down 348 whp and 242tq. SO JO I GUESS WE HAD A PROBLEM! When I went to retune the car Omar had put a password on the flashpro so I couldn't upload any changes but COULD download his map. What he was trying to protect was his work but you need to know how flashpro works before you try to do something like that. He wouldn't give me the flashpro password, until after 4 days of arguing through text message (cause he wouldn't answer any of my phone calls) we finally came to a conclusion. I had him access my computer remotely and change the password. Once Turbogixxer and were able to retune it the car made 419whp & 313 tq. Jo problem fixed!


I'm not going to go into detail about payment but I was quoted one thing and then when I went to go pick it up he invoiced me something entirely different. $1,500 more than I was quoted. So tell me this, you guaranteed that you would have it done within the time period I asked but that didn't happen. You told me that I was going to have the car tune by CMB. That didn't happen. You quoted me something I thought was the final quote & that didn't happen. 1, 2, & 3 strikes your OUT!!! I was so angry. I didn't want to get into with him especially after a 4 hour drive up. I told him that I wasn't going to pay the final price and handed him the Florida State Law guidelines which states that before you proceed with work you have to tell the customer how much it will cost. We came to a "fair" price supposedly. He asked me if I was happy and I said "Yea" but that was just so that I could get out of there.

Ok now for the problems. The same night driving home. Both water temp gauge and oil temp gauge went out. They connected them without crimping and just wrapped it with electrical tape. I had to fix that. Next the car was over heating after I had asked Jo if need to change the radiator he said NO. Also after everything they never installed an Intake on the turbo. I asked him are you going to make an intake and he said "No there's no need for an intake." Beautiful.

Next problem, where the downpipe and the exhaust connect came apart and was dragging on the road. The downpipe is too short. I had to pull the exhaust as much as possible so that it would stay connected. I need to get an extention some how. Also the angle on the downpipe isn't enough so the exhaust hangs too low below the car. I need to get it bent too.

Next problem, it looks like they didn't have a clamp small enough for the charge pipe to connect to the turbo so they got a bigger one, cut it, and welded it. Well that lasted like a month and then the clamp failed and the charge pipe came off. That's really great work

Next problem, when they installed the new clutch master cylinder they never adjusted the engagement rod. When I took it to the track last night, the clutch started to slip after the 3rd run and wouldn't engage. Mind you I waited 30 minutes between each run. That shouldn't have happened. I waited an hour and drove the car home. Just took it for a test run now it's not slipping at all. I have to make some changes there now.

The finishing touches, they only put back 2 clips on the bottom fender lining so when I was driving the other day the fender lining came off along with the drivers side bumper.

I really can't remember much more at this point but this is pretty much the experience I had with them. I'm really disappointed in the whole experience and wish that I would have done it with another company. Be aware that these Puerto Ricans do some shady stuff and cut corners. This is a fact. Maybe others haven't spoke out but I know 3 people personally that have had similar experiences with them. Jo is a smooth talker when it comes to getting you to bring the car there but once they have it you are at their mercy.

Sorry for the long review but I wanted to be as detailed as possible. Please don't re-post this anywhere else except for on this forum.