,.,
,.,
Last edited by boosted sleeper; 08-03-2011 at 10:15 PM.
Nice! what power did you make out of this?
2001 Boosted Built k20a2 Billet BB 6766BB
2013=579whp 406trq @ 24 psi c16
10.87@137mph
2014= 510whp 370trq @ 18psi pump gas
2015= 7xx @ 30psi??
The stage 1 was baby sh*t so i really didn't see any huge gains. The stage 2 was really nice I seen about 360-385 hp. The stage 3 i never got to fully tune but it was making 10-12 lbs of boost easily going to put me over 400 on a reliable daily driver
There's no way a Stage 2 or 3 is bringing you to mid 300 to 400hp dude
"As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."
One-off SRT Top Mount Manifold - GT3076R
My Ruckus Build
Maybe 360-380 @ the crank. But nowhere close to that to the wheels.
Spaz is running a fairly beefed up setup and he's making ~315whp on his jrsc last I looked. That's on the k24a2 with aftercooler.
Tire slayer
Breaking everything since 2011
Ok and I ran a stage 2 meth kit with a 3.0 pulley. A 3.0 pulley produces anywhere from 10-12 lbs of boost as opposed to the stage 2. I've also had this on the dyno so please save your trash talking for someone else's thread. This is a FS section, not an open discussion. If your interested- make me an offer or ask about the kit- if not, please don't bother posting. thank you.
Last edited by boosted sleeper; 08-02-2011 at 12:32 PM.
Last edited by PetefromtheStreets; 08-02-2011 at 12:36 PM.
Tire slayer
Breaking everything since 2011
Please look it up yourself. I had a thread up on the 8th civic website of my car with the Meth stage 2 system on it. If your really interested in seeing the setup i had you can try to find the link- i believe it's still up. Otherwise, i'd appreciate it if you left this thread empty for people interested in buying my kit. Thank you.
Last edited by boosted sleeper; 08-02-2011 at 01:19 PM.
This will be my last comment given its a for sake thread.
Removed your estimated hp numbers please because they are false. I looked you up on 8thcivic and read your entire thread. It started in February 09. Throughout that thread not once did te car ever get tuned to maximize hp. So I know for fact it won't reach 400whp.
Jmercado on CRSX has a twin screw and his made 424whp. Your s/c is far from his. He also has a shit tone of cooling being done to the blower also. Good luck selling your kit but I doubt it sells to anyone on this site due to the fact we are all pretty knowledgable with these and their potential.
Tire slayer
Breaking everything since 2011
ADM,
My numbers aren't fake so i'm not taking anything down. Thanks for reading over my thread however, the numbers were never put up for a reason. I will NOT take my numbers down since i've already asked you twice to kindly, not post on my thread and you've continued to so i've forwarded this to the proper people. I'd really appreciate it again if you don't post on my FS section since your NOT buying this item- if you look in the rules for posting thread on FS- it clearly states not to bash people selling and don't post unless your interested. As far as my numbers go, I don't post them online- sorry to burst your bubble. I was tuned by a local shop so- i do have the proof of the potential of this kit. If you read up on how much the pulley as well as the meth kit projects- i do hit these numbers so- i'm sorry if you don't believe it but personally, I don't care. Jmercado- he posted on a RSX forum....with an RSX jackson racing supercharger....different car- different setup. I ran a stage 2 meth kit with a ford focus racing pulley- something NO ONE has done before or seen. Mine was the first 06+ civic si with this type of setup on it. Please, this is the last time i'm going to ask that you stop posting on this thread. This isn't for an RSX so you have no reason to be putting your input in. Thank you.
Last edited by boosted sleeper; 08-02-2011 at 02:55 PM.
Bookmarks