Results 1 to 3 of 3

Thread: full race 3" question

  1. #1
    Junior Member BUSHGUTS's Avatar
    Join Date
    Mar 2011
    Posts
    151
    Feedback Score
    0

    full race 3" question

    i currently have a strup header and as you all know it has a 2" collector. i have the fr exhaust mated up to it with the bottleneck 2.5" that goes to 3" that i bought from fr. im putting on the kidd header and it has the 2.5 collector. should i use the same bottleneck or use the straight solid 3" adapter that came with my exhaust initially?

    reason i ask is that my 2.5 bottleneck from fr leaked so i had it welded on. i dont want to have to do unnecessary work if its not needed.

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    I <3 Purpul Shocker
    Si Speed 317's Avatar
    Join Date
    Mar 2011
    Location
    Long Island, NY
    Posts
    3,001
    Feedback Score
    1 (100%)
    It's always best to avoid bottlenecks, but if you have a straight 3" adapter that would be best to use with the 2.5" as long as it fits properly.

    "As I lay rubber down to street, I pray for traction I can keep. But if I spin and begin to slide, please oh please protect my ride."

    One-off SRT Top Mount Manifold - GT3076R
    My Ruckus Build

  5. #3
    Formerly "Adm_rsx"


    PetefromtheStreets's Avatar
    Join Date
    Apr 2011
    Posts
    4,590
    Feedback Score
    1 (100%)
    My dc race header came with a 2.5" collector swell I ended up using a vibrant 2.5"-3" adapter. Worked perfectly and it saved me some space also. hope this helps.

    http://www.clubrsx.com/cr/VIB-2630.html

    Tapatalk FTMFW!
    Tire slayer
    Breaking everything since 2011

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •