Page 1 of 6 1 ... LastLast
Results 1 to 10 of 58

Thread: Another Turbo Ep3... :)

  1. #1
    Newbie Sheaperk's Avatar
    Join Date
    Feb 2016
    Posts
    35
    Feedback Score
    0

    Another Turbo Ep3... :)

    02 Ep3

    Engine
    T1 Spec Long block built by Watts Shop
    JE assymetrical pistons 10:1
    GE sleeves
    Manley turbo tuff rods
    87.5mm K20 - 4Piston oil pump
    Ferrea valves, Supertech springs & Guides
    Prayoonto shim kit 120lb rate
    Pray2 cams w/45* limited Cam Gear
    S2 ultra Intake Mani.
    Ktuned 90tb


    Fuel system
    Full blown hanger w/ 2 - walbro hp255's
    -8feed -6return
    Fore Innovations Regulator
    Fuellab 6 micron inline filter
    ID2000 injectors
    Ethanol


    Turbo setup
    AFI t4 sidewinder manifold
    Tial 60 gate
    Precision t4 6266 .96ar
    Sheepey 800hp intercooler
    Tial 50 bov


    Trans
    Ep3 5 spd
    Gear X 1st-4th (k20 drag kit) w/ gear-x 4.058 fd
    Mfactory LSD
    Competition Twin Disc
    Insane Shafts 1000hp axles


    Kpro v4
    Plx wideband
    Hondata Traction control
    Zeitronix - Ethanol content analyzer
    UK instrument cluster
    And kept Air Conditioning 😎



    Should make it on the dyno pretty soon, just sent it off for exhaust and charge pipes. Then all ready for dyno














    Sent from my iPhone using Tapatalk
    Last edited by Sheaperk; 02-25-2016 at 03:43 AM.

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Junior Member
    Join Date
    Nov 2012
    Posts
    169
    Feedback Score
    0
    very very nice!!!

  5. #3
    Newbie
    Join Date
    Feb 2016
    Posts
    33
    Feedback Score
    0
    Quote Originally Posted by Sheaperk View Post
    02 Ep3

    Engine
    T1 Spec Long block built by Watts Shop
    JE assymetrical pistons 10:1
    GE sleeves
    Manley turbo tuff rods
    87.5mm K20 - 4Piston oil pump
    Ferrea valves, Supertech springs & Guides
    Prayoonto shim kit 120lb rate
    Pray2 cams w/45* limited Cam Gear
    S2 ultra Intake Mani.
    Ktuned 90tb


    Fuel system
    Full blown hanger w/ 2 - walbro hp255's
    -8feed -6return
    Fore Innovations Regulator
    Fuellab 6 micron inline filter
    ID2000 injectors
    Ethanol


    Turbo setup
    AFI t4 sidewinder manifold
    Tial 60 gate
    Precision t4 6266 .96ar
    Sheepey 800hp intercooler
    Tial 50 bov


    Trans
    Ep3 5 spd
    Gear X 1st-4th (k20 drag kit) w/ gear-x 4.058 fd
    Mfactory LSD
    Competition Twin Disc
    Insane Shafts 1000hp axles


    Kpro v4
    Plx wideband
    Hondata Traction control
    Zeitronix - Ethanol content analyzer
    UK instrument cluster
    And kept Air Conditioning 😎



    Should make it on the dyno pretty soon, just sent it off for exhaust and charge pipes. Then all ready for dyno














    Sent from my iPhone using Tapatalk
    Awesome setup !! What power are you looking to get ??

  6. #4
    Newbie Sheaperk's Avatar
    Join Date
    Feb 2016
    Posts
    35
    Feedback Score
    0
    ~750ish


    Instagram [MENTION=1242]Sheaperk[/MENTION]

  7. #5
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    Looks good matey, going all out on my UK ep3 soon.

    You got a pic of how your cooler looks with the bumper on? I had to chop away quite a lot of bumper on old cooler and new one is thicker.

  8. #6
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    Also how and what have you mounted those gauges on

  9. #7
    Newbie Sheaperk's Avatar
    Join Date
    Feb 2016
    Posts
    35
    Feedback Score
    0
    I havent got my new cooler on yet. But my last setup i had to cut quite a bit.

    For the gauges; I just bought single gauge mounts and screwed them to the plastic steering column cover


    Instagram [MENTION=1242]Sheaperk[/MENTION]

  10. #8
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    That looks good! That keeps AC does it? You just go for regular turbo tuffs or with 625+ bolts?

    Wish I had seen that oil pump last month too!

  11. #9
    Newbie Sheaperk's Avatar
    Join Date
    Feb 2016
    Posts
    35
    Feedback Score
    0
    Yea. I kept ac.
    And i have the turbo tuffs with arp bolts, and upgraded wrist pins.


    Instagram [MENTION=1242]Sheaperk[/MENTION]

  12. #10
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    Sounds good!

    Thanks for taking the time to reply matey!

    Guessing you didn't move the rad and AC rad back into the bay at all? Just made space behind the bumper I guess

Page 1 of 6 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •