Page 3 of 3 FirstFirst ... 3
Results 21 to 27 of 27

Thread: My K20 6766 integra build part 2

  1. #21
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    Straight painted OEM color and paint matching the CF trunk. Im looking at enkei black rpf1s in 16s.

    as for charge piping, its 3" all the way and 3" to 3.5" into the TB. I do have a lot of piping run, so maybe doing a back door set up with less piping will help.

    I did reply to the other thread about what AEM had to say.
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  2. #22
    Senior Member Spoolin_VTEC's Avatar
    Join Date
    Apr 2011
    Location
    US
    Posts
    477
    Feedback Score
    0
    Quote Originally Posted by boosted_teg View Post
    Straight painted OEM color and paint matching the CF trunk. Im looking at enkei black rpf1s in 16s.

    as for charge piping, its 3" all the way and 3" to 3.5" into the TB. I do have a lot of piping run, so maybe doing a back door set up with less piping will help.

    I did reply to the other thread about what AEM had to say.
    Will check that thread next. As for colors and wheels, I love it! And I didn't think that much piping length could prevent boost, only increase lag. Interested in figuring out what the solution/limitation is!

  3. #23
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    so little update.

    i went back to do aem suggestions while it was warm outside. It actually made it worse. The car would run for 15 seconds and die. While running, i disabled the injectors 1 at a time, and all cylinders were firing.

    So i hooked up my gf kpro and it would idle. It seemed to have a little miss, but still idled. The air fuel would fluctuate some. I replaced the coilpacks with no difference. (quick basemap without putting in the injector dead times).

    almost ready for a part out, found a 91 black nsx with 97000miles for 28k canadian :P
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  4. #24
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    Been in contact with skunk2. I can grab a set of skunk2 tuner 2 cams local, and i wanted to know from them if they would be ideal for a turbo set up like mine. Of course they said it would definetly gain, but said that the ultra 2s would be a huge improvement. Debating wether i should get a set before my next dyno session or not.
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  5. #25
    Premium Member boosted_teg's Avatar
    Join Date
    Apr 2011
    Location
    nb, canada
    Posts
    729
    Feedback Score
    0
    took my AFI manifold off, ktuned tb, and all sensors to check everything. I found a small crack on my intake manifold which probably isnt helping.
    2001 Boosted Built k20a2 Billet BB 6766BB

    2013=579whp 406trq @ 24 psi c16
    10.87@137mph

    2014= 510whp 370trq @ 18psi pump gas


    2015= 7xx @ 30psi??

  6. #26
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Dang
    Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!

  7. #27
    BoostedK20.com Founder

    BoostedK20's Avatar
    Join Date
    Mar 2011
    Posts
    1,024
    Feedback Score
    1 (100%)
    Quote Originally Posted by boosted_teg View Post
    took my AFI manifold off, ktuned tb, and all sensors to check everything. I found a small crack on my intake manifold which probably isnt helping.
    Probably not helpful at all. Is it repairable? Any idea why it cracked?


    Need parts for your k-series setup? Check out our eShop! Click Here

    For all your eShop support needs:BoostedK20.com eShop Support Forum

Page 3 of 3 FirstFirst ... 3

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •