My K20 6766 integra build part 2

[boosted_teg]

Im going to start a new thread. I'll update when its not 5am already




New Motor set up

k20z1 motor
CSS block 86.5
Crank micropolished, balanced
ACL bearings. 0.0018/0.0020 clearances 0.0045 p2w
Brian Crower I beam rods, arp 625 bolts. Balanced also
CP 86.5 9.1 cp pistons with upgraded wrist pins
S2000 modified oil pump
Ferrea comp plus valves
Supertech bronze valve guides
Supertech 92lbs springs and retainers
Type r cams (these need changed out)

Turbo Kit

FullRace pro t4 divided twin wastegate manifold. 4 o2 bungs and back pressure fittings welded on
Tial 44mm wastegates X2
Tial 50mm BOV
Precision DBB 6766 t4 turbo 1.15 exaust
AFI center Feed manifold
80mm Ktuned Throttle body Vanjen assembly
Ktuned hall effect TPS
CC twin disk


Fuel

Fuel injector clinic 1650hz ethanol injectors
Ktuned FPR
Ktuned fuel rail
Walbro 450 intank pump
-8 feed/return
Upgraded relay for fuel pump

EMS
AEM Infinity 8h
AEM plug n play harness
AEM o2 extension
AEM o2 sensor
AEM billet Fuel pressure sensor
AEM brass 5bar map sensor