Page 1 of 6 1 ... LastLast
Results 1 to 10 of 59

Thread: Turbo manifold

  1. #1
    Newbie
    Join Date
    Oct 2015
    Posts
    26
    Feedback Score
    0

    Turbo manifold

    Hi,Guys can anyone help to choice good turbo exhaust manifold for k20a2 civic type r with 200bhp uk.

    Wysłane z mojego D2303 przy użyciu Tapatalka

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Newbie
    Join Date
    Oct 2015
    Posts
    5
    Feedback Score
    0
    I got my one from the states was best option because tdi north and cpl wanted £900 but a full race plm or similar will work good

  5. #3
    Newbie
    Join Date
    Oct 2015
    Posts
    26
    Feedback Score
    0
    Do you have any link so i can go online and buy one mate?

    Wysłane z mojego D2303 przy użyciu Tapatalka

  6. #4
    Newbie
    Join Date
    Oct 2015
    Posts
    5
    Feedback Score
    0

  7. #5
    Newbie
    Join Date
    Oct 2015
    Posts
    26
    Feedback Score
    0
    Where i can get oil sensor adapter for turbo oil feed

    Wysłane z mojego D2303 przy użyciu Tapatalka

  8. #6
    Newbie
    Join Date
    Oct 2015
    Posts
    5
    Feedback Score
    0
    I used d2 spec oil filter sandwich adapter with a 1/8 npt to -an 3 for feed never used it oil sensor adapter

  9. #7
    Newbie
    Join Date
    Oct 2015
    Posts
    26
    Feedback Score
    0
    Any links mate?

    Wysłane z mojego D2303 przy użyciu Tapatalka

  10. #8
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    The BWR / blackworks Ones seem to be very good value, and a much better fit/ design than the PLM. Around £600 inc postage and tax to the UK.

  11. #9
    Junior Member dkpr87's Avatar
    Join Date
    Feb 2013
    Posts
    246
    Feedback Score
    0
    KLM Fabrication

    Fast/Solid Work

    far better than BWR in my opinion

  12. #10
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    Either use a sandwich plate or look up LMA oil sensor adaptor. It's a remote mounted adaptor so no broken T pieces in the block.

    You need 1/8bsp for the oem oil sensor, and 1/8npt for the oil feed. You can then adapt this to an-3 to feed the turbo

    Can only recommend what I know fits into UK spec ep3s. I'm sure there are much better manis out there but unfortunately there isn't much support for Uk cars.

    My favourite mani is the nortech one. UK built with CNC collector and wastegate priority placement. Best part of £1100 ish but lifetime warranty that is credible for UK.
    Last edited by Jonezy; 10-29-2015 at 01:42 PM.

Page 1 of 6 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •