Quote Originally Posted by Jonezy View Post
Hey fellas.

Dredge this up again.

What lb springs are needed? And do you need titanium retainers?
Got 92lb super techs with titanium retainers in the basket so far.
What's up man. Sorry I never saw your last post.

What cams are you going with? The reason you go with higher spring rates for valvetrain is because of the ramp on the cam you'll be using. If you're going with a big high lift, fast ramp cam you'll need the higher spring rate. I don't know if 92 is the higher rate or not. But this is also effected by the rpm you desire. If going beyond 9k I'd go with the higher rate spring as well.

And titanium retainers are needed when you buy valvetrain and you'll need spring bases as well but I'd check with your kit. They should be called "seats".

Sent from my iPhone using Tapatalk