PFTS is finally going turbo

[PetefromtheStreets]

For my downpipe I bought the PLM sidewinder downpipe as a starting point as it's only 200 bucks. So I'll need to do is cut off the section where it buckles down to 2.5" and weld on my borg warner boostlab adapter and I should be good to go.. I'll also need to weld a vband onto the end of the dp to connect to the rest of my exhaust.

[dkpr87]

For my downpipe I bought the PLM sidewinder downpipe as a starting point as it's only 200 bucks. So I'll need to do is cut off the section where it buckles down to 2.5" and weld on my borg warner boostlab adapter and I should be good to go.. I'll also need to weld a vband onto the end of the dp to connect to the rest of my exhaust.

So jelly... nobody makes downpipes for EGs

[PetefromtheStreets]

So jelly... nobody makes downpipes for EGs

I'll have to Modify it to got with my turbo and exhaust but its a general starting point