thanks to Jeff12886!!

connected a splice to the E22 (Brake Switch Line)
*note* in the pic I didnt cut the wire, i thought you had to T into it but you just cut it and connect straight to the ECU, if you dont cut it, your brake lights will come on with the switch



For my positive 12V I T'ed into the 12V wire that I used for my Boost Solenoid and viola, crack open a beer and your done, unless you have a led switch like i have, then you need to hook up a ground for the LED inside the switch.

Set it to the brake switch in KPRO and your done