Page 1 of 2 1 ... LastLast
Results 1 to 10 of 20

Thread: Ep3 fuel quick fitting

  1. #1
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0

    Ep3 fuel quick fitting

    Hi guys.

    I need an adaptor for connecting my oem fuel fitting to an AN6 teflon fuel hose,

    I have all the fittings aside from the quick connect to an6 to the hardline on the bulkhead, it seems to be smaller than the 5/16" used on the fuel rail connectors

    A good guess would be that it's 6mm/ 1/4". Yet I'm really struggle to find one. Anybody else done this

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Senior Member Spoolin_VTEC's Avatar
    Join Date
    Apr 2011
    Location
    US
    Posts
    477
    Feedback Score
    0
    [MENTION=1040]Jonezy[/MENTION] let's get these guys to chime in
    [MENTION=28]Spaz[/MENTION] [MENTION=56]PetefromtheStreets[/MENTION] [MENTION=185]aLmk[/MENTION] [MENTION=40]monjarassi[/MENTION] [MENTION=2]Si Speed 317[/MENTION] [MENTION=193]Xander[/MENTION] [MENTION=775]Poita[/MENTION] [MENTION=1029]Shanket[/MENTION]

  5. #3
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    That's a tough one I been looking
    Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!

  6. #4
    BoostedK20.com Founder

    BoostedK20's Avatar
    Join Date
    Mar 2011
    Posts
    1,025
    Feedback Score
    1 (100%)
    Actually, our BoostedK20 Si used the stock fuel fitting with the -6 K-Tuned rail. We used a Hybrid Racing adapter piece. Check that out, let me know if that's what you're looking for. http://www.hybrid-racing.com/store/engine/fuel-fittings [MENTION=1040]Jonezy[/MENTION]
    Last edited by BoostedK20; 10-02-2014 at 01:15 AM.


    Need parts for your k-series setup? Check out our eShop! Click Here

    For all your eShop support needs:BoostedK20.com eShop Support Forum

  7. #5
    Newbie
    Join Date
    Dec 2012
    Location
    Brazil
    Posts
    33
    Feedback Score
    0
    Have you tried that ?
    http://www.summitracing.com/parts/RUS-641303

    Fits perfectly on the FA5! Not sure about the EP3 though...
    Last edited by Poita; 10-02-2014 at 07:12 AM.

  8. #6
    Senior Member Shanket's Avatar
    Join Date
    Jan 2014
    Location
    Corpus Christi TX
    Age
    31
    Posts
    258
    Feedback Score
    0
    i just did a -6an or -8an from firewall to fuel rail

  9. #7
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    I just used a bunch of clamps cause back when I changed rails no one knew of a quick release fitting. But now you can buy them
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  10. #8
    Master Member
    Join Date
    Dec 2011
    Location
    Delaware
    Posts
    1,889
    Feedback Score
    1 (100%)
    Where exactly do you need this fitting to go? To connect the oem hardline to the bulkhead fitting at the cage?

  11. #9
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    Amlk - yes pal. I'm trying to run an an hose from the bulkhead hardline. As I'm using teflon line it doesn't clamp down as well as rubber stuff,

  12. #10
    Junior Member
    Join Date
    Jan 2014
    Posts
    114
    Feedback Score
    0
    [MENTION=28]Spaz[/MENTION] - that looks the size pal. I measured it with caliper as 6.1mm I think, which is near as dammit 1/4".

    Thanks for the input. Just got to find one this side of the pond!

Page 1 of 2 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •