Page 1 of 3 1 ... LastLast
Results 1 to 10 of 21

Thread: Highest hp on stock tb+intake mani

  1. #1
    Newbie Jus abase's Avatar
    Join Date
    Mar 2014
    Posts
    43
    Feedback Score
    0

    Highest hp on stock tb+intake mani

    I wanna see dyno numbers or first hand accounts, not hey that one guy made something. Or my buddy did this. I'm shooting for 6-650 on e85, s366, k24/20 stock head 10:1 forged block, 3" ic pipes & ic. Don't want my tb being the constriction.

  2.    Sponsored Links





  3. Become a Free Registered Member and Remove This Ad!


  4. #2
    Junior Member stigrl06's Avatar
    Join Date
    Mar 2014
    Posts
    50
    Feedback Score
    0
    best bet is lurk on k20a

  5. #3
    Newbie Jus abase's Avatar
    Join Date
    Mar 2014
    Posts
    43
    Feedback Score
    0
    Ya I've been searching. Even found a couple guys posted that they have seen setups make 700+ on stock rbc+tb. Jus wanna hear from the guys who did it

  6. #4
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    yea ive personally seen my budds rsx when he was stock motor turbo top the stock tb rite around the 500+ hp range, reason he went 74mm
    Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!

  7. #5
    Newbie Jus abase's Avatar
    Join Date
    Mar 2014
    Posts
    43
    Feedback Score
    0
    See there's the difference. First hand account... I contacted maxbore to see if they will take my rsx tb to 70mm

  8. #6
    Newbie Jus abase's Avatar
    Join Date
    Mar 2014
    Posts
    43
    Feedback Score
    0
    Martin enlighten me on in tank with an inline pump setup. I'm changing to e85 and adding an 044 inline. What do I do. Is it as ez as putting the pump inline then wiring it up?

  9. #7
    Boostaholic
    monjarassi's Avatar
    Join Date
    Apr 2011
    Location
    Houston TX
    Posts
    2,665
    Feedback Score
    2 (100%)
    Yes sirre, I simply left my walbro 255 in the tank, mounted the 044 under the car and ran all my hoses and wiring, as easy as 123.
    Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!

  10. #8
    Super Moderator
    Spaz's Avatar
    Join Date
    Mar 2011
    Posts
    1,687
    Feedback Score
    0
    we've hit 560 on a stock TB on E85. It was still fuel holding him back not air flow. He had swapped to RBC vs PRB
    Available now are SPAZ APPROVED decals!!! Available in multiple colors!


    Need parts?! Check out our eShop and let me know! We can help you out!
    http://boostedk20.com/eshop/

  11. #9
    Newbie Jus abase's Avatar
    Join Date
    Mar 2014
    Posts
    43
    Feedback Score
    0
    Ok so do I jus splice power and ground from my wire harness that goes to my tank, then just run it to the 044

  12. #10
    Newbie Jus abase's Avatar
    Join Date
    Mar 2014
    Posts
    43
    Feedback Score
    0
    Thx man. Spaz U still comin to phx?

Page 1 of 3 1 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •