looking good.. ill love to have a cooler on mine..
So this is my build thread , some history before the build.I am the second owner of the Acura bought it in 2003 , then did the K-swap in 2004 cause the 1.7L had a bad head gasket.
The Acura EL were only in the Canadian market between the year of 2001-2005 then became the Acura CSX. So basicaly it is just a dressed up Civic people say.
Motor
2.4L k20/k24 motor swap
K20Z1 head
Dual valve train
K20Z1 intake cam with a TSX exhaust cam
Balanced bottom end
Jackson Racing M62 supercharger
Mercracing Aftercoller
Mercracing Inlet
Mercracing Pulley
Hondata heat shield manifold gasket
AEM short ram intake
70 mm tapered throttle body
K-tuned Fuel rail
06 Honda Civic Si radiator
05 honda Civic Sir electronic steering rack
Acura Rsx subframe
Custom power distribution box
Semi Wire tuck
Battery relocation to the trunk
Power steering deleted
Hybrid racing chain tensioner
Hasport ESK3 solid mounts
K-Tuned billet TPS sensor
K-Tuned coil pack cover
K-Tuned valve cover breather
Vibrant stainless steal race header
Apexi 2.5 inch mandrel bent stainless steal exhaust piping
Apexi World sport II exhaust
Magnaflow high flow catalytic converters
Drivetrain
Acura Rsx Type-S 6 speed carbon syncro
Acura Rsx type-S shift linkage
Exedy stage 2 clutch
ACT organic street disc
Hybrid racing performance shifter bushing
K-Tuned billet shift knob
Brains
Hybrid racing conversion harness
Hondata K-Pro
Suspension
Tein super street coil overs
Acura type-S front lower sway bar
Inglis camber kit rear
Newspeed front X-brace
Newspeed upper strut bar
Newspeed rear lower 27 mm sway bar
Wheels
Tenzo-R Type M Mesh version 2
Nitto neo gen 215/40ZR/17
Blox Street series forged lugs
Paint / outside of vehicle
Diamond black paint
Custom front bumper
Custom head light tint and signals light tint
Custom tinted chrome trim
Air brushed rear decals
Inside the car
Custom painted trim
JVC KW-AVX 830 head unit
K-Tuned billet shift knob
It is a 01 Acura EL 1.7 Night Hawk black 5 speed. This is a awsome site and allot of info about parts and DIY .
With my 18's
If you guy and girls have any question just post them up.
This is my build for my Acura EL 1.7 L to 2.4 L
So I decided to drop a K24 into my EL and this is how the build when.
My car before the swap.
Some parts I got
After market rods on the left and stock TSX on the right
Valve spring setup with S2000 and RSX Type S springs and the head.
Hybrid racing wire harnest
Hasport motor mounts
The K24
Finished Product With the Valve cover custom painted
Some new Wheels
Hybrid chain tensoner cause my stock one was gone , Hondadta manifold gasket and some nice shift linkage stuff from Hybrid to.
Then i got the car painted
Got a few shot's of the car today it was painted yesterday and it was getting buffed and their going to finish up the bumpers and my front grill in the next couple of days .
This is the metallic in the paint look awsom!!
We smoked the headlight,signal lights and all chrome on the car .
Before
New look
Well since i have my last post i have updated the car just little. A few month ago i found a awsome deal on a Jackson Racing supercharger a top mounted one. So i decided to get to beef up the old 4 door. Afterwards one of my sent me a link that somebody was selling a aftercooler kit from Mercracing and with the aftercooler kit a Mercracing inlet and 3 inch Mercracing pulley . So i jumped for the deal and here is were i am at now. Oh and i also go a second set of headlight that i painted the housing black.
Here are some of the pictures of the the updated build.
mounted it on a test motor to see what i was missing
Polished it up
The core for the aftercooler
some fabrication required to fit it in.
and the battle continues this week.
and my headlight finished product
Some random shots of the car and a random Integras
Last edited by K24_Acura_EL; 04-16-2014 at 09:46 AM.
looking good.. ill love to have a cooler on mine..
god damn that's awesome! That will be one seriously sick sleeper!
Available now are SPAZ APPROVED decals!!! Available in multiple colors!
Need parts?! Check out our eShop and let me know! We can help you out!
http://boostedk20.com/eshop/
4 door is always a plus in my book
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
We are still in the tuning stage with the car , but making very good progress until the other had a Alternator bole backed off and lost it spacers. But we fixed the other night and back on the road.
Searching for some bolts and lock tight at walmart , but they don't have any such thing and this was at 9 pm at night on a Sunday
.
aww snap
Using promo code "SPOOLBUS" @ checkout when shopping in the eshop will save you money!!
Welcome to the fourm!! Awesome build so far.
Joe
1991 Acura NSX
Well a little update on the build , after driving the car for the a month my 8 year old stage 2 Clutch has taken a fatal hit and no longer to provide .So after some shopping for parts i bought a competition clutch stage 4 sprung 6 puck . Now we are trying to find a solution to place more tension on the belt cause it has been slipping . Also i took advantage when the motor was out to repaint the block and the transmission cause it has been 8 years in the car.
I got the Jackson racing Manuel tensioner with jrsc but most of the bolts were stripped , so we ended up using the oem one cause that what we had at the time.
Bookmarks