*Chat* Roll Cages, Snow Ball Fights, & PFTS Quotes from 2013 for the New Year

[monjarassi]

You mean z3 block? And what made you go OEM rather than ACL?

Yes z3 block sorry.

And for one (engine builder/tuner) preference and I have a close friend on a built types have issues with them bearings on the dyno.
Don't wanna go there myself.

[ryaano18]

Yea thanks, I'm going with the acl bearings. From what I've read, the crank and rod part numbers are the same for the z3 and a2 so how could the bearings be different? The part numbers for the bearings are different, but that is probably because of the coating monjarassi was talking about.

They are all interchangeable, the only difference being their thickness between ACL and OEM. ACL standard size is similar to a Honda green bearing IIRC... As long as you are in the correct tolerances for each bearing you should be good to go. Just make sure to check your clearances with plastiguage or micrometer.

[monjarassi]

They are all interchangeable, the only difference being their thickness between ACL and OEM. ACL standard size is similar to a Honda green bearing IIRC... As long as you are in the correct tolerances for each bearing you should be good to go. Just make sure to check your clearances with plastiguage or micrometer.

Good info homie. Good info.

Proud of u

[aLmk]

They are all interchangeable, the only difference being their thickness between ACL and OEM. ACL standard size is similar to a Honda green bearing IIRC... As long as you are in the correct tolerances for each bearing you should be good to go. Just make sure to check your clearances with plastiguage or micrometer.

Ya machine shop is checking all that and will be using the appropriate bearings. Thanks for all the input, I will be going with ACL bearings.

[ryaano18]

Good info homie. Good info.

Proud of u

So I texted you know who, no reply yet... Hopefully something will happen

[ryaano18]

Ya machine shop is checking all that and will be using the appropriate bearings. Thanks for all the input, I will be going with ACL bearings.

Cool beans! Will they be blueprinting it?

[monjarassi]

So i texted you know who, no reply yet... Hopefully something will happen

:fuu:

[ryaano18]

:fuu:

yup.... did you fix the X?

[monjarassi]

yup.... did you fix the X?

found the real problem. Dizzy took a crap

picking one up tomorrow and knocking it out

[ryaano18]

found the real problem. Dizzy took a crap

picking one up tomorrow and knocking it out

Not bad, it was overdue