No problem,
There is no other way I am aware of amgalmate the two pieces of information, except manually, on an older Kpro :)
However in the past to get around this, we use the AEM serial cable...
Type: Posts; User: E-Tunez
No problem,
There is no other way I am aware of amgalmate the two pieces of information, except manually, on an older Kpro :)
However in the past to get around this, we use the AEM serial cable...
For sure, hit us up at tuning@e-tunez.com and I will help you out, I don't get a chance to check these threads very often. Filedropper isn't displaying the security code properly for me to download...
No problem, we don't usually give freebies, but seeing we havn't done anything for BoostedK for awhile, this one is on the house. Its just a basemap of course, so will require more work for sure. Had...
After all this time, I just realized we didn't even have a thread in here! My bad, I don't check here often enough.
If you are need of some free datalog advice with Kpro feel free to shoot us an...
Hey guys,
Anytime you hit a IPW of 0ms, there is a good change its an ECU related fuel cut. In your case it was boost cut, but the same symptoms present for Rev Limit cuts and Launch Control cuts....
Hey guys, glad you got it fixed. Typically when those issues happen there are 6 things to check.
1) Car Battery - Make sure voltage is up
2) Ground - Make sure the grounding cable is good, you...
No worries, I had let him know to come say Hi, and I didn't notice the bleeping the first time around! :)
Steve
Its not great for the internals because the excess fuel scrubs the cylinder walls of lubrication, the same for the valve stems, also the sudden burst loading and cut off flexes the exhaust manifold...
The Si ECU does support both a Launch Limit and a Rev Limit, and recovery RPM for both settings, but because the software for our ECU is a bit better then those, this is as close as you are going to...
While there could be heat/lean issues with the two step rev limiter on a turbo build, (depending on spool and other factors), its no issue at all for the NA guys. The FlashPro does support a launch...
Hi all,
We are pleased to be part of the BoostK20 community, and are looking forward to working the crew here.
We have alot of experience with the forced induction K-series motors so if you...
Thanks for the feedback guys :) We do try, if you ever need a hand with anything or anything Mike was working on, feel free to hit him me up. He is still around here and there, but doesn't have the...