took my AFI manifold off, ktuned tb, and all sensors to check everything. I found a small crack on my intake manifold which probably isnt helping.
Type: Posts; User: boosted_teg
took my AFI manifold off, ktuned tb, and all sensors to check everything. I found a small crack on my intake manifold which probably isnt helping.
Been in contact with skunk2. I can grab a set of skunk2 tuner 2 cams local, and i wanted to know from them if they would be ideal for a turbo set up like mine. Of course they said it would definetly...
Curious if anyone else has found any dyno comparisons on the skunk2 ultra manifolds versus everything else.
Im curious if i could benefit or not by switching up my afi center feed to a skunk2...
Definetly needs tuning and should look a lot better. I never liked those virtual dyno for actual numbers. I could just change a few settings and gain a lot of power. Good for a power curve though.
...
those are pretty sweet.
WCF last time i went, there was a couple flying around the crowd, and following the cars up the track.
I made 580 on c16, id1000s with 50 base pressure. 25psi. stock lines walbro 400
on c16, id2000s walbroh 450 in tank with -8 feed -6 return, my buddys car made 785whp at 34 psi.
my other friend...
I replied some in the other thread. I did what aem said. Level out the timing at idle, leveled out the target afr at idle and few more settings.
It didnt make much fo a difference. Actually, it...
so little update.
i went back to do aem suggestions while it was warm outside. It actually made it worse. The car would run for 15 seconds and die. While running, i disabled the injectors 1 at a...
60mm wastegate or 2 44mm usually has no creep. People who are plagued with creep have 1 44mm gate and not done right. I think the BDL manifold is the only one i could see keep 1 small gate and have...
Straight painted OEM color and paint matching the CF trunk. Im looking at enkei black rpf1s in 16s.
as for charge piping, its 3" all the way and 3" to 3.5" into the TB. I do have a lot of...
I got in contact with aem again. They wrote back after looking at my idle logs, and they think that my car is missfiring and not completly running on 3 cylinders. I got some tests to do and some...
i knwo i know. haha I figured it out on facebook. Can't wait to see the progress.
Sold my wheels and my CF hood. Going with OEM hood and paint match my CF trunk to the rest. Change it up.
...
Full race t4 divided housing
t4 divided 1.15 exaust housing
Ball bearing
33 psi on my friends k24 made 785whp
they dont make a 6765 anymore, its been replaced with the 6766.
Im going try...
rob reinen, drives a 440whp all motor k series. Worked for Humble Performance and now works with Norris. I paid rob to get the vvc going. Theres been a few cars here that miller tuned, and they didnt...
ballbearing or journal?
why do you have to redo the piping?
Rob gained some midrange out of the tune, but can almost tell something is holding it back.
...
must be facebook.
Rob Reinen works with Norris daily, so wouldnt make a difference there if it was rob or norris.
I contacted FIC, and they've only had 1 car tuned on infinity with the injectors. The tuner he...
Almost did this.
https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/s720x720/12243393_10153729028636740_2405143501940834469_n.jpg?oh=6821c3fcbb5c4aa4b811149e7fb07dea&oe=56E4C453
haha,...
Yip, im going go back to a 4 port. 14psi springs, my 3 port probably wont make it past 30.
im debating whether to put a set of good cams or not. I'll push to whatever it takes.
https://www.facebook.com/photo.php?v=10153755321096740
this is the issue of smoking throughout the power band. 11.8-12 afr the whole way
brandon wilbur made 750whp on 30lbs/e85. k20a2 stock cams, same turbo as mine
We have no e85 here, just crappy 91 octane. I dont have a fuel set up enough to support e85. Im sure once the race gas is in, it'll jump up fairly fast.
Maybe the prc-1 head is hurting it. Its a...