Hellllllllllllllllllllllssssssssssssssssssssssssss yeaaaaaaaaaaaaaaaaaaaaaaaaa :)
Type: Posts; User: ryaano18
Hellllllllllllllllllllllssssssssssssssssssssssssss yeaaaaaaaaaaaaaaaaaaaaaaaaa :)
hola sir speedy si :)
Morning fuckers! Everyone still alive?
Thanks for the kind words! Always help to have the layout diagram of the connector you're using since the numbering on the connector can get confusing and may end up putting it in the wrong hole........
Congrats man, looks like an awesome fun time!
haha trust me, I know the paranoia
Let me know if you need parts or advice :)
You got this! It will be so worth it when the car cranks over with your harness
I go with more "off-brands" versions. When it comes to mil-dtl parts, they are made to certain specifications that make them all very similar if not equal (i say this loosely). Amphenol and deutsch...
I know all the part numbers ;) lol They are 301A boots, the last 3 numbers depend on the size of the bundle(s) you are applying it over. I use a caliper to measure the bundle and then choose the...
Final pics of the harness. Just waiting for the owner to come pick her up!
http://i866.photobucket.com/albums/ab225/ryaano18/0022_zps8291e4ec.jpg...
You got this!
No problem, and just in case if you didn't know, you also need the back shells for those connectors for the boots to work
depends on the angle of the wire coming off the cannon. if the wire runs straight then a 202K boot, if 90 degree then 222K
Technically, the 174 size is needed for the 24 shell size, but in my...
lol no worries, i bought mine used as well. If you're in a pinch, you can use this one
...
Nice, looks like a 24-61? Do you already have the dmc tool to crimp the contacts?
what the hell is sleep?
lol I make sure to get at least 7 hours, regardless of 2 jobs and school. I couldn't manage everything (well without wanting to shoot myself) without at least 7 hours of...
I've been missing from all my forums. Been crazy busy, here's some quick pics from a harness im working on, Ill let the client take the final pics when ready, but here are a few build pics to keep...
Thank you kindly!
Ill do my best to not disappoint :)
Just gotta get those final measurements
whats going gentlemen. Hows everyone?
3 amps is fine for a signal. Signals are very very low amerage
either will work. 2 pin are regular switches, power to one and signal to other.
3 pin is same except one pin is ground (these are usually for switches with LEDs)
and your diagram is correct
Ahhhhh thanks for clarifying that. Well Jonezy you could still cut it and extend to a switch, or you can depin the brake wire, and repin a flying lead to a switch and just tuck away the oem wire with...
saw the vids and looks sick!
Somethings need to be cut lol But if you prefer i can send you a flying lead wire with a terminal that you can plug in to somewhere in the E connector or any spare hole in the A, B, E connector that...
sounds soooo good!