P0606 PCM failure

Printable View

10-16-2013
Lilwhit14

P0606 PCM failure

Guys my boosted fa5 is throwing an ecu failure code. My car is fine in lower gears (1-3) but in higher gears with more load (4-6) is only when it does it, but only under full throttle at higher rpms. It's fine just regular driving. I have 1000cc injectors and a walbro 255 pump. My a/f's and oil pressure are all fine so I'm at a loss. I'm also running a Hondata 4bar map sensor tuned with flashpro. Just ordered a new ecu but worried I will pay honda to program it and it still throw the code. Can anyone help?
10-16-2013
Lilwhit14

Also, when cel is thrown, it turns my vsa light on and puts my car in limp mode
10-20-2013
Si Speed 317

[MENTION=56]Adm_rsx[/MENTION] [MENTION=28]Spaz[/MENTION] [MENTION=83]vdubkilla[/MENTION] [MENTION=789]VitViper[/MENTION]
10-20-2013
PetefromtheStreets

I can't begin to think on that one. Very very odd

s4 IG-petefromthestreets
Cage plus radio member #1
11-07-2013
Si Speed 317

Any updates? [MENTION=846]Lilwhit14[/MENTION]
11-07-2013
Lilwhit14

Quote:

Originally Posted by Si Speed 317

Any updates? [MENTION=846]Lilwhit14[/MENTION]

Well my pressure plate ring was broken in 3 places so I'm thinking if it was causing enough noise for the knock sensor to pick up that a new clutch will fix it. Atleast that's what I'm hoping.
11-09-2013
Si Speed 317

Quote:

Originally Posted by Lilwhit14

Well my pressure plate ring was broken in 3 places so I'm thinking if it was causing enough noise for the knock sensor to pick up that a new clutch will fix it. Atleast that's what I'm hoping.

Makes sense to an extent. Either way, definitely important to replace before moving forward. How did you figure that out? I'm assuming you dropped the tranny
11-09-2013
ksboi

He posted pics on IG, it was in a lot of peices. That is why you go higher on the clutch then what you need so it does not break.
11-09-2013
Lilwhit14

Quote:

Originally Posted by Si Speed 317

Makes sense to an extent. Either way, definitely important to replace before moving forward. How did you figure that out? I'm assuming you dropped the tranny

Yea I tore the car down that day. Been on jack stands for 2 weeks. And my car makes 264ft/lbs. that clutch was a 4 puck race clutch rated for 425ft/lbs. think I went a little over kill. Lol