k20boosted hatch's drag build

this is my eg drag car build. got sick of it being a show car and decided to rebuild it for the track
let me know what you guys thing and if you have any suggestions let me know

the set up
k20a2 motor
ep3 sir 5 speed tranny
custom sidewinder manifold
t3/gt40 turbo aka blowzilla
tial 44mm wastegate
clutchmaster stage 3 clutch

for now more to come . parts are so damn expensive here in canada lol



car went from this
http://i253.photobucket.com/albums/h...wmycar4444.jpg

to this
http://i253.photobucket.com/albums/h...hatch/pic1.jpg
http://i253.photobucket.com/albums/h...ghatch/008.jpg
http://i253.photobucket.com/albums/h...ghatch/010.jpg
http://i253.photobucket.com/albums/h...mycarboost.jpg
http://i253.photobucket.com/albums/h...ghatch/009.jpg
http://i253.photobucket.com/albums/h...ghatch/003.jpg
http://i253.photobucket.com/albums/h...ghatch/002.jpg

installed my ccc racing street wing
http://i253.photobucket.com/albums/h...hatch/ccc2.jpg
http://i253.photobucket.com/albums/h...hatch/ccc1.jpg

installed rear bumper diffuser
http://i253.photobucket.com/albums/h...h/DSC02588.jpg
http://i253.photobucket.com/albums/h...1219-00231.jpg

took the car to blinemechanics to get the brakes done and then alignment
http://i253.photobucket.com/albums/h...tch/photo2.jpg
http://i253.photobucket.com/albums/h...tch/photo5.jpg

got car back at home and decided it needed a little bit of a diet
http://i253.photobucket.com/albums/h...tch/photo7.jpg

almost done
http://i253.photobucket.com/albums/h...tch/photo8.jpg

removing tar on the floor
http://i253.photobucket.com/albums/h...tch/photo9.jpg

dash back in
http://i253.photobucket.com/albums/h...tch/photo6.jpg

and the latest update. took car to centerline motorsports to have the 6 point cage done and decided to do the pipes out the hood also a new custom catch can is being made
http://i253.photobucket.com/albums/h...ps13a7af19.jpg


will be updating as the work is getting done

wow looks good! I like the before and the after, nice and clean.

Power goals?

btw, where about in canada? There's a few of us on here now. :)

wow beastly status

Quote:

---

Originally Posted by boosted_teg

wow looks good! I like the before and the after, nice and clean.

Power goals?

btw, where about in canada? There's a few of us on here now. :)

---

i am in toronto canada. im pretty sure i have seen you car on jdmrides.ca?
for power im going for at least 550 for now still debating on putting the part i have on this one or just building a seprate motor

Sub'd

uhh maybe on jdmrides, didnt think i posted a picture on there. I dont post much, just browse a lot. :P

Is always nice having a back up motor if need be.

:welcome: to :boostedk20: Love the build, glad to see you joined! Post more details if you can, and this car can still be a show car. We have many members with drag builds that win shows. Just depends on the amount of detail you focus on. Best of luck!

nice

new update****

hood exit exhaust its 90% complete and hood is cut just waiting on the plate to cover up the hole.also my boys at centerline motorsports started my roll cage. pics are of it just tacked up and they still have to add some more bars. catch can still has to be built

http://i253.photobucket.com/albums/h...pscb92e9e2.jpg
http://i253.photobucket.com/albums/h...psf68cf2aa.jpg
http://i253.photobucket.com/albums/h...ps28e0faf8.jpg


ROLL CAGE

http://i253.photobucket.com/albums/h...ps7e11910a.jpg
http://i253.photobucket.com/albums/h...ps1e8fbd69.jpg
http://i253.photobucket.com/albums/h...ps0c7c9aee.jpg

more to come

Looks great! We love builds with exhausts and dumps that exit in places other than the norm.

:thumb:

Damn. Love hood exits. Too bad I can't have one. :(

Nice hood exit...

Where u getting the plate for the hood.

Quote:

---

Originally Posted by monjarassi

Nice hood exit...

Where u getting the plate for the hood.

---

Centerline motorsports is making me a custom one

update****

everything is all done at the fab shop. I didnt take pics so i am using the shops photos


roll cage done


http://i130.photobucket.com/albums/p...ps5c07da14.jpg
http://i130.photobucket.com/albums/p...psb8e75385.jpg

hood exit pipes done with custom plate
http://i130.photobucket.com/albums/p...psc5d07dc8.jpg

catch can done. this it wat it looks like. will have pics once i get my vc and catch can back from paint

http://i130.photobucket.com/albums/p...ps1261d108.jpg

and my custom street wing they made (mine is the cf vinyl one) will have installed pics soon
http://i130.photobucket.com/albums/p...ps6d3dab3e.jpg

Nice update! Cage looks great, and centerline did a great job on everything. Cutout, wing, everything. Glad to see it, this shop seems to be top notch so far. In for more updates!

car is now dynod and ready to hit the track next weeknd

http://i253.photobucket.com/albums/h...pse2cc2e44.jpg
http://i253.photobucket.com/albums/h...psbe12bd98.jpg
http://i253.photobucket.com/albums/h...psf5c85e42.jpg

Quote:

---

Originally Posted by K20boostedhatch

car is now dynod and ready to hit the track next weeknd

http://i253.photobucket.com/albums/h...pse2cc2e44.jpg
http://i253.photobucket.com/albums/h...psbe12bd98.jpg
http://i253.photobucket.com/albums/h...psf5c85e42.jpg

---

Any videos of the dyno?

s4 petefromthestreets

Quote:

---

Originally Posted by K20boostedhatch

car is now dynod and ready to hit the track next weeknd

http://i253.photobucket.com/albums/h...pse2cc2e44.jpg
http://i253.photobucket.com/albums/h...psbe12bd98.jpg
http://i253.photobucket.com/albums/h...psf5c85e42.jpg

---

I'm definitely in for a dyno video!

there is the dyno vid


http://www.youtube.com/watch?v=rgk7ZLHBAsQ

Very nice sounds good. Can't wait to see some track vids

s4 petefromthestreets

pics from the track. blew the clutch 2nd pass. time for a twin disc

http://i253.photobucket.com/albums/h...ps83e29f9e.jpg
http://i253.photobucket.com/albums/h...psf21a9cd5.jpg
http://i253.photobucket.com/albums/h...ps7463d4fc.jpg
http://i253.photobucket.com/albums/h...ps484e9efa.jpg

Quote:

---

Originally Posted by K20boostedhatch

pics from the track. blew the clutch 2nd pass. time for a twin disc

http://i253.photobucket.com/albums/h...ps83e29f9e.jpg
http://i253.photobucket.com/albums/h...psf21a9cd5.jpg
http://i253.photobucket.com/albums/h...ps7463d4fc.jpg
http://i253.photobucket.com/albums/h...ps484e9efa.jpg

---

I did the EXACT same thing yesterday had a decent first pass low on the ignition timing turned it up for the second pass and blew the clutch out.

s4 petefromthestreets

Quote:

---

Originally Posted by Adm_rsx

I did the EXACT same thing yesterday had a decent first pass low on the ignition timing turned it up for the second pass and blew the clutch out.

s4 petefromthestreets

---

what clutch did you have?

Quote:

---

Originally Posted by K20boostedhatch

what clutch did you have?

---

CC twin disc. Stripped the splines in the hubs. They weren't too good looking when I bought it used so it was only a matter of time. But I like that clutch the best

s4 petefromthestreets

Quote:

---

Originally Posted by Adm_rsx

CC twin disc. Stripped the splines in the hubs. They weren't too good looking when I bought it used so it was only a matter of time. But I like that clutch the best

s4 petefromthestreets

---

thats the clutch i just ordered. heard good things about it

I love My CC twin disc and make similar power its a great clutch for the track if you street drive it that takes a lil getting use to but it's not bad .Your car looks great btw man real nice build .

Car looks great man, sorry to hear about the clutch issue(s). In for more runs tho, hope she's all fixed soon!! Good to know about the twin disk tho. Lets get a twin disk review thread going. (Clutch:, mileage:, type of use:, then personal review, [MENTION=56]Adm_rsx[/MENTION] or [MENTION=83]vdubkilla[/MENTION]?)

so we installed the clutch last week and went to the track on friday night. ran a 11.20 @ 130 first ever full pass with this setup. and then snapped a drive shaft second pass fml lol heres the vid.
http://www.youtube.com/watch?v=GssChUH7tU4

very nice vid n pass

Quote:

---

Originally Posted by K20boostedhatch

so we installed the clutch last week and went to the track on friday night. ran a 11.20 @ 130 first ever full pass with this setup. and then snapped a drive shaft second pass fml lol heres the vid.
http://www.youtube.com/watch?v=GssChUH7tU4

---

Lmaooooo. Dude we have the same problems at the same times. I snapped an axle on my first pass on Friday.

11.20 is awesome man. Congrats and good luck with future passes.

s4 IG-petefromthestreets

Beautiful run!! What camera was this taken with? Great job man, glad to see you got a taste of what's to come.

did some testing lastnight and went 10.8 @135 mph with a 1.8 60 footer. here is the vid

http://www.youtube.com/watch?v=NM-eokRP7FY

Quote:

---

Originally Posted by K20boostedhatch

did some testing lastnight and went 10.8 @135 mph with a 1.8 60 footer. here is the vid

http://www.youtube.com/watch?v=NM-eokRP7FY

---

Nice!! With a bit of a better launch setup, you'll be at low 10's in a couple passes. Congrats!

Quote:

---

Originally Posted by K20boostedhatch

did some testing lastnight and went 10.8 @135 mph with a 1.8 60 footer. here is the vid

http://www.youtube.com/watch?v=NM-eokRP7FY

---

Awesome man looks great props to you :thumb: :goodpost:

new update
picked up an exospeed front end and starting the new engine build and fuel setup
front end fits pretty good, just needs final adjusment and paint. will be running the stock motor setup until the built motor is finished

http://i253.photobucket.com/albums/h...ps19eba4f1.jpg
http://i253.photobucket.com/albums/h...psf19d89a6.jpg
http://i253.photobucket.com/albums/h...ps8c9fef06.jpg

Man that front end looks sick.


Sent from my stupid iPhone using Tapatalk

looks real good