What's up everyone .... New to the site.. got an invite from someone on 8th a while back but just getting around to making an account.
This is my 4th boosted car but first honda on boost and I love it.
Previous cars were:
88 Ford Fiero(god it did great donuts in the snow)
90 Honda Accord (totaled)
87 Dodge Dayonta Shelby Z Super60 kit 300ish HP
85 Dodge Charger Shelby
98 Civic Hatch B16 swap
86 Shelby GLH-S #153 (yeah it's an omni box)
Current rides:
07 Civic Si
03 S2000
11 Jeep Grand Cherokee Overland 4x4 5.7L
So I'll get right into it...
Engine
Full Race kit includes
Garrett GT3076
Full Race manifold and turbine housing 2000deg HPC coated
Full Race 3" downpipe
Full Race 3" exhaust
Full Race dumptube
Full Race Vacuum Block
Black anodized intercooler
Black IC piping
Black MVR TiAL wastegate
Black TiAL Q BOV
Injector Dynamics 1000cc Injectors with plug-n-play clips
Walbro 250lph fuel pump (uncrushed fpr)
Hondata Boost Control Solenoid
Hondata 4bar MAP Sensor
NGK BR9EIX plugs
Cusco Small Oil Catchcan
Buddy Club Racing Spec Battery
Hasport FDSTK Mount Kit
CC Stage 4 clutch with lightweight flywheel
AMSOIL 5W-30 Synthetic and MTF Syncromesh
Honda PCV Valve(punched out)
Honda Exhaust Manifold gasket and head studs w/ nuts
DEI Headerwrap on downpipe and dumptube
Valve cover powdercoated wrinkle black
Valve cover gasket
Tube of hondabond
Gold heat shield
Misc fittings and tubings
I probably forgot some stuff but you get the idea
Suspension and Rollers
17x8 +35 offset Desmond Regamaster EVO (All Mighty Grey)
225/45R-17 Hankook RS-3's
Rays DurAluminum Black Lugnuts
Eibach Sportlines
Appearance
FEEL's FG2 Front lip
JDM FD2 Type R Emblems
Spoon Radiator Cap
Acura RDX Turbo Badge
Acura RDX "TURBO I-VTEC" vanity cover
Password JDM Carbon Kevlar Plug Cover
GRAFX Expr "civic si" console and "I<3MyFG" decals
I-VTEC custom plate
Luminics yellow DR light bulbs
6000k HID's
XLR8 v2 Gauge pod
Electronics
AEM Wideband EUGO and Electronic Boost Gauge
Escort Passport 9500i Radar/Laser Detector
Hondata Flashpro w/ pins for WBO2 and BBG wired
Now onto everyone favorite part the pictures and videos...
And onto the build process .. it was all done on jackstands and no we didn't drop the subframe ... took two of us approx 38hrs to complete the install.
I'll post some more pics when I get around to doing a proper photoshoot
I'm not oblivious so yes a set of Albins 1-4 is in the future but first I'm going to address the suspension and brakes.
Future plans:
AMR Engineering Coil-overs
PCI Spherical LCA Bushings
PCI Side Skirts
FEEL's Over Fenders
FEEL's Oil Cap/Radiator Cap
Oil Pan Baffle
Fuel Return = SRT Pump cage, dual pumps(undecided), AFPR, ect.
Albins Option 2 with TSX 5th, Carbon Synchros, MTEC Spring and 4.76 Albins FD
Comp Clutch Super Single
Hondata Traction Control
New set of Wheels probably 17x9.5 with at least 255 rubber if not 275.
PWJDM Carbon Kevlar Cooling plate and Intake Manifold Cover
VIS Carbon Kevlar Hood
3lb Wastegate spring and 4port boost solenoid.
I also have a K24 bored to 87.5mm with Wiseco 13.7:1 pistons, RSX-s Oil Pump and rods that I bought before I went turbo so I might swap those slugs out for some 10:1's and crank up the boost when I install the tranny.
Thanks for taking a look and watch out for some videos in the near future when I return from the desert!
Peace,
Tyler
06-04-2012
monjarassi
dang very nice
06-04-2012
Rbsjnh
nice why such a small turbo
06-04-2012
k20fg
Thanks guys .. yeah she's just a lil GT3076R .. I'm not looking to set any 1/4mile records and I frequent road courses more than drag strips so that was the initial choice for the GT30. Now that I have an S2k I have been focusing on making that the track toy. I have been doing some research on the FP HTA GT3786R ... thing looks like it would spool a K24 quite nicely.
06-05-2012
vdubkilla
Very Nice man I loved my 3076r its an excellent street turbo :turbohug: and props on a quality build man looks like you do things right and IMW is top notch :thumb:
06-05-2012
k20fg
Thanks vdub, I try to not cut corners, it pays of in the long run with reliability I think.
Yeah I live in NC but drove up to PA to do the Install and get tuned by IMW because of their reputation and thats were I grew up, gotta support the hometown shops!
If any mods want to move this to boosted build threads they are more then welcome to.
06-28-2012
Si Speed 317
Wow, how did I miss this?! Great setup, nice cars, and awesome house. Top quality parts on the S2k and the FG2, I'm amazed! Post pics of your garage setup in the garage setup thread! And I'll PM BoostedK20 to make it to the build section. Any more videos?
06-28-2012
Spaz
looks like you have it rough.... lol :)
That manifold looks awesome! nice work man
06-28-2012
k20fg
Thanks everyone! You'd be surprised how much house you can get in NC for a reasonable amount!
Got some updates but nothing installed on the car yet(I'm over in the desert for a few more months)
I was able to pickup a set of AMR Engineering Coilovers with 400/500 Hyperco Springs so I'm excited about that.
I got a Veilside V1 lip for the s2k so I think that'll give it the look I'm going for.
Going to pickup a set of FEELs Overfenders and try and get them to fit on the FG, after talking with someone else that's had them he thinks they should fit without much modification. These should let me run at least 17x9.5's all around and get some rubber planted to the road .. at least 255's and possibly 275's up front.
Tossing around some Albins gear ratios to see which setup I'd benefit from most.
ALBINS Option 1, TSX 5th w/4.76 FD or ALBINS Option 2 w/4.38 FD ... here are the gear calculations based on stock tire size.
Like I said earlier I'm not huge on hitting the drag strip so I think that Option 2 would be great for some road courses and highway pulls. Let me know what your guys take on this is.
-Tyler
07-01-2012
Spoolin_VTEC
That's quite an option, have you ever looked into PPG gears?
07-02-2012
Si Speed 317
Gearing worries me, I want my tranny to stay alive! Albins has better gear ratios than PPG gears. Both are out of my ballpark anyway.
07-02-2012
k20fg
Yeah its a tough pill to swallow for a tranny build but I want this car to last the long haul. These are some rough estimates I put together not including finding another used donor tranny and labor install.
ALBINS Gears = 3850
TSX 5th Gears 60+70 = 130
Sleeves & 1-6 Synchros = 825
Torco Trans fluid 20x5 = 100
MTEC Spring
TOTAL = 4915 + s&h
Things really get out of hand when you throw a Twin Disk in there along with EM1 CMC/Hybrid cables.
All in good time though .. hopefully this stock tranny holds up a little longer
07-04-2012
Si Speed 317
Quote:
Originally Posted by k20fg
Yeah its a tough pill to swallow for a tranny build but I want this car to last the long haul. These are some rough estimates I put together not including finding another used donor tranny and labor install.
ALBINS Gears = 3850
TSX 5th Gears 60+70 = 130
Sleeves & 1-6 Synchros = 825
Torco Trans fluid 20x5 = 100
MTEC Spring
TOTAL = 4915 + s&h
Things really get out of hand when you throw a Twin Disk in there along with EM1 CMC/Hybrid cables.
All in good time though .. hopefully this stock tranny holds up a little longer
:wow::ohnoes: That's nuts. Any reason why you haven't looked into PPG gears?
09-03-2012
07_civic_si
Nice build! I cant wait to order my Full Race kit soon :vtec:
09-03-2012
ksboi
FR < BoostJunkyz lol Nice build man. I would def do some more reasearch. I think you can get away with running just ppg or albins 3-4 and get tsx 6 and just get some ep3 or base rsx 1,2 and 5. They are pretty long.
09-03-2012
Spaz
I want Albins too
sent via spazatalk
09-05-2012
k20fg
Yeah I've done a ton of research and I'd be more at ease with the Albins 1-4 and FD.
I haven't posted my updates in here yet since all the parts are sitting at home waiting to be installed.
09-05-2012
ksboi
How is fort bragg treating you?
09-05-2012
k20fg
It is alright once you get out of FayetteNam .. I live like 32miles away from post so I like the country area I'm at.
The Mountains are a few hours drive (Tail of the Dragon) and the coast (Myrtle Beach and Wilmington) is even shorter.
I'm a Sailor so I am partial to being stationed by the water but I don't mind being land locked .. haha
09-06-2012
ksboi
OH I found a site that sells Feels front bumper and other exterior accents :)
09-06-2012
k20fg
I could have told you .. japanparts.com
I just placed a descent sized order with them so I'll throw those updates in as well when I get home.
09-06-2012
ksboi
See I had a question I wanted some front bumper from feels or js racing but would the holes light up on our civics?
09-08-2012
k20fg
I don't "think" they would .. you'd have to do the FD2 Front Conversion and then purchase the FEEL's Front Bumper ... which is pretty sick I must say!
09-08-2012
ksboi
Just emailed a guy in cali with fd conversion for 1300.
09-08-2012
Spaz
Quote:
Originally Posted by k20fg
I don't "think" they would .. you'd have to do the FD2 Front Conversion and then purchase the FEEL's Front Bumper ... which is pretty sick I must say!
Yeah that feels is siiiick
sent via spazatalk
09-22-2012
Si Speed 317
Pics of said Feel's bumper? I'd like to see :wavey:
