Ksboi Lil Sedan

07 Civic Si Sedan. Always wanted a K20 and finally got this for a great deal after my vacation to the sand box. The engine being built is k20a2 with wiseco 86.5mm pistons 9.8:1 CR with Eagle Rods. Fuel system is 255 walbro and ID1000cc injectors. Head is going to be stock z3 head and trans will be getting albins 3-4th gears. Turbo manifold is being built right now and i am still needing to get IC, gauges, oil kit, WG, BOV and oil catch can. IF yall have any input feel free to post it.

http://img534.imageshack.us/img534/4...fionbptq1n.jpg
http://img15.imageshack.us/img15/770...5125031687.jpg
http://img813.imageshack.us/img813/8...8125026149.jpg
http://img17.imageshack.us/img17/388...2172656908.jpg
http://img846.imageshack.us/img846/8...4228863310.jpg
http://img24.imageshack.us/img24/493...k619473117.jpg
http://img209.imageshack.us/img209/6...5140104713.jpg

Sounds like an awesome build, you'll have a cable throttle with that right? And what turbo will you be running?

Its DBW. I am still up in the air, GT3076R is what I am leaning towards or this one a guy told me about zeta 3.0

Just got a great deal on IC 24x12x4 a monster! may have to modify my crash bar but it came with 3" piping so I am swapping for 2.5". Just waiting for my boost solenoid, vacuum block and manifold to be finished!

^ Nice, which intercooler is it? That's pretty big, you'll definitely have to modify your reinforcement without a doubt. Post a pic!

Welcome to the boards! Can't wait for updates. Those 8th gens are a pain in the ass to work on back there...

No idea on the brand but for the price I had to take a change. I have seen a bar that replaces your factory crash bar. I think Full Race makes it.
Also ordered my ARP studs, magnetic drain plug and a new shift boot. Just waiting on the machine shop with block and then head gasket then I can have a base map put on it and then do the break-in.
http://img689.imageshack.us/img689/9734/32011761.jpg
http://img687.imageshack.us/img687/9917/ic2p.jpg
http://img403.imageshack.us/img403/5034/ic3i.jpg

is that one of those universal intercooler piping kits?

No guy bought it for some american car. I got a fab guy who is building my piping.

It looks like a universal kit, he was probably going to custom fit it to his car. Keep us updated on the progress!

Well good new. Got my 4 bar map sensor, locash vacuum block, new leather shift boot, shift knob and my ARP head studs. Will be ordering my HG and clutch tomorrow and then just a waiting game on getting my block back from the machine shop. Also paid for my turbo and manifold just gotta get it all welded up and take to the guy for my IC piping to be routed and my BOV branket to be welded on.

Sweet, another habanero FA5! Looking good.

Do I smell a Boosted HRP club starting soon?

lol no idea!! hopefully all my parts come in this weekend.

I smell it too, HRPclubFTW! What clutch did you end up going with? And usually shipping companies deliver until ~5pm on saturdays, give or take a few hours. Hopefully you'll get your stuff!

Competition Clutch Stage 5. Yeah!!! ARP head studs, map sensor, magnetic oil plug, vacuum block!!!! Also my turbo!!!

http://img545.imageshack.us/img545/39/img954266.jpg

Fixed it. I hate trying to upload shit from my cell phone onto imageshack. Its a AGP Zeta 3.0. Its like a cross between gt30r and gt35r. But has same spool characteristics as gtx turbo.

Toss [img*] and [/img*] around that link but without the **'s I added. Nice! What turbo is it?

strapped in
http://img404.imageshack.us/img404/6...5043835976.jpg
http://img836.imageshack.us/img836/7...0316100229.jpg
http://img32.imageshack.us/img32/751/img5602p.jpg
http://img835.imageshack.us/img835/9...2160804865.jpg
factory k20a2 rods and piston for sale
http://img35.imageshack.us/img35/9981/img8028s.jpg
http://img826.imageshack.us/img826/5681/img3716s.jpg
http://img21.imageshack.us/img21/7978/img3376h.jpg

Coming along nicely. Good luck with the build. Can't wait to see it done.

This came in today..but from what I read I may need to get a gauge that reads above 20 psi.
http://img819.imageshack.us/img819/5...6173943996.jpg

Quote:

---

Originally Posted by ksboi

This came in today..but from what I read I may need to get a gauge that reads above 20 psi.
http://img819.imageshack.us/img819/5...6173943996.jpg

---

Str8JDM's old gauge? And it should be positioned at 0 when it doesn't see any vacuum or boost. I would call Auto Meter before installing that. And it depends on how much boost you plan on running. You've got a decent sized turbo that will yield some nice numbers.

yes its his old gauge, lol. He said just to tap it but I planned on taking it apart this weekend make sure all the parts are free of dirt and replace the electrical wires.

got this today.
http://img26.imageshack.us/img26/287...8181951811.jpg

my IC was lost in transit! and WG will be here friday.

Is that a wideband? If not, you need to return it for one ASAP.

doesn't seem to be the wideband......... I agree return it and spend for the wideband it's a necessity

yes its the AEM wideband. under the flap has all the wiring and the bosch o2 sensor.

http://img521.imageshack.us/img521/9...9164306434.jpg

Purchased this today. I hate waiting for shipping so I drove to another town 45 mins away to pick it up.

http://img441.imageshack.us/img441/8...0182016893.jpg
http://img694.imageshack.us/img694/6...0182837181.jpg

Quote:

---

Originally Posted by ksboi

http://img441.imageshack.us/img441/8...0182016893.jpg
http://img694.imageshack.us/img694/6...0182837181.jpg

---

Lmfao. I felt like doing that when my sc came in. Sleeping with it. Lol.

Waiting on my IC, piping and manifold to be done. Block is at the shop. My HG and clutch arrived. Need my basemap and to get my block back and then 700 mile break in then its boost time!

Its my bday!!!!!

Happy b day you April fool. Lol

Happy belated birthday!

thanks everyone!!! Where is a good place to order IC piping?

Quote:

---

Originally Posted by ksboi

thanks everyone!!! Where is a good place to order IC piping?

---

Full race. Or do like monjarassi did and get a universal kit piece it together then have it welded together in sections.

:yeahthat: I would go universal and do it yourself. FR charges a lot for their piping kit, and I don't think you can purchase it without the intercooler but don't hold me to that.

Yeah I will never buy FR parts. They cost to much!
Look what came in the mail today
http://img39.imageshack.us/img39/760...6191654840.jpg
old pic
http://img802.imageshack.us/img802/2...8132846969.jpg

Yeah I will never buy FR parts. They cost to much!
Look what came in the mail today
http://img39.imageshack.us/img39/760...6191654840.jpg
old pic
http://img802.imageshack.us/img802/2...8132846969.jpg

You'll be shifting like butter now! Do you have the base bushings? IMO it's a better feel with just shifter cable bushings. Car looks clean!