921hp pte6870 mr2

http://dumpybutts.com/uncategorized/...0-powered-mr2/

http://dumpybutts.com/wp-content/upl...0-1024x680.jpg

Built. Not bought.

Its a phrase that is often said in the automotive world. People love to say it. But how much of their car was actually built? We at Dumpybutts like to think that a handful of bolt-ons and wheels doesn’t constitute as built. Putting in the hours planning, designing, fabricating, and tweaking parts; going against the norm, that’s built, and thats what we love.

Words: Anthony Marsiglia

Snaps: Jason Babin

http://dumpybutts.com/wp-content/upl...0-1024x680.jpg

Brandon’s 1991 Toyota MR2 is the definition of the term, built, not bought. In fact, in the old barn on Brandon’s families property in Ragley, La, everything short of the intake manifold, and your usual do-dads; were built by him and good friend Matt Alcock. From the custom rear coilovers, to the home built twinscroll turbo manifold, almost nothing wasn’t made their own. When you’re running at the speeds these guys are going, you pay attention to detail, and only trust a few.

http://dumpybutts.com/wp-content/upl...4-1024x641.jpg

Claiming the title of highest horsepower MR2 in the country, this car comes in making 921hp to the wheels. While that number is impressive, what really makes this car special is the boosted K20a2 power plant; sorry not sorry 3S-GTE fans. Brandon has been a long time Honda fan, and coming from a 700hp civic, it was only logical to take what he already knows and incorporate it into another platform.

http://dumpybutts.com/wp-content/upl...3-1024x579.jpg

Never satisfied, Brandon will continue to tweak things in preparation for TX2K15 in March, where he will continue to break hearts and hopefully keep his undefeated record. Brandon wants to thank Matt, for having the balls to stay filming at 190mph. You can watch the MR2 in action on Brandons YouTube page. https://www.youtube.com/user/beerad12

http://dumpybutts.com/wp-content/upl...d-1024x742.jpg

http://dumpybutts.com/wp-content/upl...8-1024x680.jpg

http://dumpybutts.com/wp-content/upl...7-825x1024.jpg

http://dumpybutts.com/wp-content/upl...4-1024x680.jpg

http://dumpybutts.com/wp-content/upl...1-1024x641.jpg

http://dumpybutts.com/wp-content/upl...9-1024x680.jpg

http://dumpybutts.com/wp-content/upl...0-1024x567.jpg

Mods:

Powertrain:
K20a2 assembled by Brandon Wilbur and Matt Alcock
JE pistons
Eagle rods
Supertech valvetrain
Prayoonto 2 cams
ACL bearings
L19 headstuds
Xcessive intake manifold
90mm throttle body
Custom twin scroll turbo manifold
Precision 6870 BB turbo
PTE-1000 air to water intercooler
3″ intercooler pipe
4″ exhaust
Front heat exchanger with -12 AN water lines
ID2000 injectors
Magnafuel 4303 pump
10 gal fuel cell
-10 AN feed
-8 return
Magnafuel FPR
K-tuned pro 1000 fuel rail
AEM 5 bar map
Hondata KPRO
Custom wire harness by Chase Aguilard
K-tuned water neck
Tunerview rd-1 dash
Plx wideband

Driveline:
K20a2 transmission assembled by Brandon Wilbur and Matt Alcock
Albins gearset
Albins final drive
DSS spool
Competition twin disc clutch
Custom Driveshaftshop 5.9 axles
Custom built coilovers in house
Tubular control arms with spherical bushings
Custom motor mounts built in shop
Manual brake conversion with Wilwood master cylinder
Weld rts with 275 m/t drag radials

http://dumpybutts.com/wp-content/upl...6-1024x907.jpg

http://dumpybutts.com/wp-content/upl...1-704x1024.jpg

http://dumpybutts.com/wp-content/upl...2-1024x680.jpg

http://dumpybutts.com/wp-content/upl...5-826x1024.jpg

http://dumpybutts.com/wp-content/upl...0-1024x680.jpg

http://dumpybutts.com/wp-content/upl...1-1024x680.jpg

http://dumpybutts.com/wp-content/upl...2-1024x734.jpg

wow and still stock sleeves, are you try get bigger injector?

Quote:

---

Originally Posted by 1BadK

Retuned my Mr2 over the weekend and here are the results. Ran out of fuel at 921hp on Id2000's and the magnafuel 4303 pump.

Stock sleeve 86mm K20a2
JE pistons
Eagle rods
Prayoonto 2 cams
Supertech valvetrain
PTE1000 air/water intercooler system
bb 6870 turbo 1.0 twin scroll
xcessive manifold
90mm throttle body

---

I'd say this is the highest HP stock sleeve K.... just saying....

Baddest mr2 around real talk

Holy shit any plans to upgrade the fuel system

Love this! Nice to see another 2nd gen aside from RaceLab! I'd like to do a feature on this build. We'll be in touch!

And as always, :welcome::to::boostedk20:

Thanks guys, as far as rite now goes, I don't plan on upgrading anything on the fuel system. Only way up is for an 8 injector setup. And the only way for that is if I switch from hondata. And I still need to get used to 921 on 2200 lbs lol. Its a lot to handle ill say that. And boostedk20 if you need any info, pics, or anything, pm me and ill give you all the info and pics you need!

seen this car all over the internet... it is fucking sick!!!!!

This just hands down jaw dropping......

absulutly sick! id love to own this, or wouldve done this swap

:bump:

bandon still on here?

[MENTION=859]1BadK[/MENTION] You still on here man?

Yea im still here. I need to update this post. I built a much stronger motor, got some new goodies, made better power and been beating some faster cars and bikes lol

pics
http://www.boostedk20.com/forums/att...0&d=1449086580
http://www.boostedk20.com/forums/att...9&d=1449086527

Quote:

---

Originally Posted by 1BadK

pics
http://www.boostedk20.com/forums/att...0&d=1449086580
http://www.boostedk20.com/forums/att...9&d=1449086527

---

Awesome! Man I love this build. Super eager to see the updates you've done. New goodies sounds yummy, and a stronger motor is always badass. I'm sure you'll post it, but what did you change motor-wise and why did you choose it? I'm sure due to strength, durability, etc. but I'm asking more of why you decided on said parts and chose them vs others.

Quote:

---

Originally Posted by 1BadK

Yea im still here. I need to update this post. I built a much stronger motor, got some new goodies, made better power and been beating some faster cars and bikes lol

---

Definitely in on this man. I've been MIA on here as well, going to start making a come back. As spoolin mentioned, keep us in the loop! This is an awesome build, would be cool to cover on the instagram and facebook page I'm sure [MENTION=1]BoostedK20[/MENTION]

Looking forward to your posts man

i see a part out on this mr2 on facebook.. :( Or at least the shell is for sale


I only asked to see what ems you were running, but i asked you on facebook already

Quote:

---

Originally Posted by boosted_teg

i see a part out on this mr2 on facebook.. :( Or at least the shell is for sale


I only asked to see what ems you were running, but i asked you on facebook already

---

[MENTION=859]1BadK[/MENTION] parting out?!

Quote:

---

Originally Posted by boosted_teg

i see a part out on this mr2 on facebook.. :( Or at least the shell is for sale


I only asked to see what ems you were running, but i asked you on facebook already

---

Hey man sorry if i did respond. I had a ton of messages and im still getting to them. Im running kpro. And yea i found a new platform to put my swap in. So im selling my shell and a few parts off my car.

Trust me yall wont be dissapointed when yall see what the swap is going in.

Quote:

---

Originally Posted by 1BadK

Trust me yall wont be dissapointed when yall see what the swap is going in.

---

Contact [MENTION=1]BoostedK20[/MENTION] I'm sure he'd love to feature it with an article, if you're interested. Looking forward to what you plan on doing man!

[MENTION=859]1BadK[/MENTION] Would love to do an article feature on your new setup, if you'd like. Contact me anytime. Confidentiality is ensured 100%. Looking forward to your new build!

Looking forward to this!!!! [MENTION=859]1BadK[/MENTION]

Shell has been sold new nastier project on the rise peeps.


Stay tuned pl

i knwo i know. haha I figured it out on facebook. Can't wait to see the progress.

Yup

Quote:

---

Originally Posted by monjarassi

shell has been sold new nastier project on the rise peeps.


Stay tuned pl

---

eager!!!