Turbo manifold

Hi,Guys can anyone help to choice good turbo exhaust manifold for k20a2 civic type r with 200bhp uk.

Wysłane z mojego D2303 przy użyciu Tapatalka

I got my one from the states was best option because tdi north and cpl wanted £900 but a full race plm or similar will work good

Do you have any link so i can go online and buy one mate?

Wysłane z mojego D2303 przy użyciu Tapatalka

Here's very similar to mine
http://m.ebay.co.uk/itm/K-Series-K20...-/320781364573

Where i can get oil sensor adapter for turbo oil feed

Wysłane z mojego D2303 przy użyciu Tapatalka

I used d2 spec oil filter sandwich adapter with a 1/8 npt to -an 3 for feed never used it oil sensor adapter

Any links mate?

Wysłane z mojego D2303 przy użyciu Tapatalka

The BWR / blackworks Ones seem to be very good value, and a much better fit/ design than the PLM. Around £600 inc postage and tax to the UK.

KLM Fabrication

Fast/Solid Work

far better than BWR in my opinion

Either use a sandwich plate or look up LMA oil sensor adaptor. It's a remote mounted adaptor so no broken T pieces in the block.

You need 1/8bsp for the oem oil sensor, and 1/8npt for the oil feed. You can then adapt this to an-3 to feed the turbo

Can only recommend what I know fits into UK spec ep3s. I'm sure there are much better manis out there but unfortunately there isn't much support for Uk cars.

My favourite mani is the nortech one. UK built with CNC collector and wastegate priority placement. Best part of £1100 ish but lifetime warranty that is credible for UK.