That's just sad on your part :\, least the whip will be fast though.
Fuel system king crew member #1
Printable View
That's just sad on your part :\, least the whip will be fast though.
Fuel system king crew member #1
Or sad on your part that you have enough spare time to correct my every mistake. Let's not forget how you spell "bought".Quote:
Originally Posted by Bottled Morphine
s4 IG-petefromthestreets
Cage plus radio member #1
Quote:
Originally Posted by Bottled Morphine
you guys go together like two peas in a pod :)Quote:
Originally Posted by PetefromtheStreets
Idk what YOU'RE talking about :)
Fuel system king crew member #1
Me either that's why I BROUGHT you some flowers.
s4 IG-petefromthestreets
Cage plus radio member #1
Lol
Fuel system king crew member #1
Flowers though?
Fuel system king crew member #1
Hello lower cruising rpm's. My Tsx 6th gear came in.
http://img.tapatalk.com/d/14/01/11/unujejyz.jpghttp://img.tapatalk.com/d/14/01/11/epezynyt.jpghttp://img.tapatalk.com/d/14/01/11/y6e3e9y7.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
Beautiful I want this on my tranny too
Yea I've been wanting it for a while now. And since the cats getting a new trans build I couldn't leave this out. LolQuote:
Originally Posted by monjarassi
s4 IG-petefromthestreets
Cage plus radio member #1
Look at the cruising rpm's and mph. [MENTION=40]monjarassi[/MENTION] Lol. I love it. http://img.tapatalk.com/d/14/01/11/beqa8u3e.jpg
http://img.tapatalk.com/d/14/01/11/ytupede3.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
Awww yeAa.......
Effin right. Lol 100mph at 4kQuote:
Originally Posted by monjarassi
s4 IG-petefromthestreets
Cage plus radio member #1
That is awesome, so what will your Rpms be at when your at regular 60-70mph cruising? If it makes that big a difference this is a requirement to VTA BOV centrifugal supercharger set ups. I avoided highway drives this summer because of how loud the car is on the highway. I'm assuming yours is the same
Sent from my iPhone using Tapatalk - now Free
And by loud I meant the sound of the air venting not the exhaust....just to clarify haha
Sent from my iPhone using Tapatalk - now Free
Quote:
Originally Posted by 04carboncivic
Lmao. My cars Damn loud for sure! But with the mph to rpm now it shouldn't be a problem. Check it outQuote:
Originally Posted by 04carboncivic
http://img.tapatalk.com/d/14/01/11/nubu3abe.jpghttp://img.tapatalk.com/d/14/01/11/y8y9y5an.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
What, 2200rpm?!?! Do you have a 25+ inch tire ? God I knew tsx 6th dropped rpm but not that much. That's unbelievable. If you don't mind me asking, how much was the gear and synchros?
Sent from my iPhone using Tapatalk - now Free
Yea I run a 235/45/17 it's 25.33“Quote:
Originally Posted by 04carboncivic
And it was 190 shipped. Even comes with the needle bearing
s4 IG-petefromthestreets
Cage plus radio member #1
Nice, where did you buy from? Also did you ever look into the 4.0FD that use to be on the market, I wish they were still for sale to stretch out these short first few gears of ours
Sent from my iPhone using Tapatalk - now Free
If I still had 6speed gears then I would have looked into it. I bought Ppg 1/2 set and that 2nd is only 5 mph short of my 3rd so I needed to get 5 speed 3/4/5 and this 6th.Quote:
Originally Posted by 04carboncivic
s4 IG-petefromthestreets
Cage plus radio member #1
So today I had my son help me with my engine. I have a coupe videos here just showing him helping me out. Was good to get him involved in my hobby a d he truly took an interest.
Here he was helping my lay some gasket maker on the water pump assembly http://img.tapatalk.com/d/14/01/14/a7y9azy5.jpg
And spreading it around to make it evenhttp://img.tapatalk.com/d/14/01/14/y7ety3uz.jpg
Taking the bolts out of the water pump itself. http://img.tapatalk.com/d/14/01/14/u2ysu6y6.jpg
https://www.dropbox.com/s/5cuo2r17gs...113_203701.mp4
https://www.dropbox.com/s/3bvqj07inv...113_204430.mp4
s4 IG-petefromthestreets
Cage plus radio member #1
Better watch out man, before you know it he is going to be faster than you, heck he beat everyone on the scooter already...Quote:
Originally Posted by PetefromtheStreets
Haha yea he was bookin on them fools in ny already. LolQuote:
Originally Posted by Frostydc5
s4 IG-petefromthestreets
Cage plus radio member #1
Gotta love Honda Bond! And smearing it around but gloves really? Use your fingers lol
I didn't want Honda bond all over his clothes. Lol trust me. Gloves were a good idea hahaQuote:
Originally Posted by Spaz
s4 IG-petefromthestreets
Cage plus radio member #1
That's awesome! your son puts hondabond on better than i do lol
Lmao.Quote:
Originally Posted by ryaano18
Update :
Oil pump kit cane in from kmod performance today.
Includes:
Chain
Chain guide
Pump
And pump shield thingy majig
http://img.tapatalk.com/d/14/01/15/y4evate9.jpg
Making a bracket for my fan relays and fuses.
http://img.tapatalk.com/d/14/01/15/enyjebet.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
Its his son spreading it not him. There's no need to have a young kid get that all over his skin or whatever he decides to do with it.Quote:
Originally Posted by Spaz
Ahh shit here we go time to assemble soon i assumeQuote:
Originally Posted by PetefromtheStreets
Lmao it could become shampoo or anything really to a 5 year old. HahaQuote:
Originally Posted by Frostydc5
And Yup it will go on tonight!!
s4 IG-petefromthestreets
Cage plus radio member #1
How did you order this kit? i need to order the complete setup as well tomorrow but the everything together is like 400ish dollars from delray. I looked on kmods website and I only saw the modified onesQuote:
Originally Posted by PetefromtheStreets
That's what I bought. The kmod modified oil pump. I'm sure you could call them and talk if they ever answer the phone. But marquis did email me right back when I sent him a messageQuote:
Originally Posted by ryaano18
s4 IG-petefromthestreets
Cage plus radio member #1
awesome, ill send them an email and see what they say. Thanks for the help!Quote:
Originally Posted by PetefromtheStreets
Np dude. AnytimeQuote:
Originally Posted by ryaano18
s4 IG-petefromthestreets
Cage plus radio member #1
Finished the bracket for the relays.
http://img.tapatalk.com/d/14/01/15/yze7agyd.jpg
http://img.tapatalk.com/d/14/01/15/azysepe6.jpghttp://img.tapatalk.com/d/14/01/15/ra5y2u3u.jpghttp://img.tapatalk.com/d/14/01/15/yzemysen.jpghttp://img.tapatalk.com/d/14/01/15/u2aqaty4.jpghttp://img.tapatalk.com/d/14/01/15/e2eju8u8.jpg
I'm designing a box to go around the relays and to help seal them from directly getting wet. It will be designed with magic's cad software then 3d printed out of ABS plastic in FDM on a printer I have at my terrific job. FDM is shirt for Fused Deposition Modeling. It's a process in which how you build the part. It will then be copper and nickel plated by me at my job. I could keep it in plastic but I would prefer the strength increase. And it's also what I do for a living. Then I will paint it to keep it from staining. (nickel stains very easily if it gets wet.)
s4 IG-petefromthestreets
Cage plus radio member #1
You fancy
Fuel system king crew member #1
Just one word...awesome
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Quote:
Originally Posted by SAX JONZ
Thanks guys.Quote:
Originally Posted by Bottled Morphine
Did a little work on the motor tonight....
Got the oil pump on
Pump Baffle on
Guides for oil pump
Started to work my way up when I realized I didn't get everything I needed back from the machine shop. But it's only bolts so I'm ordering new ones tomorrow. As well as o-ring gaskets for misc parts around the motor.
Also installed the rocker assembly and cams. If it's one thing I hate it's putting the damn rocker assembly on the head. They just have a mind of their own and pins comes out every which way.... Goojesus is a headache. But that is done.
I'm also getting a z3 top cam chain guide. They are longer and cover more of the gear vs my factory z1 guide.
Gets a few pics of what's done or started...
http://img.tapatalk.com/d/14/01/15/e5unugu7.jpghttp://img.tapatalk.com/d/14/01/15/eduzu3ar.jpghttp://img.tapatalk.com/d/14/01/15/jy4e6u8a.jpg
Also started on the cad work for my relay cover box.
http://img.tapatalk.com/d/14/01/15/y3aruqaz.jpghttp://img.tapatalk.com/d/14/01/15/ynuqe3e8.jpghttp://img.tapatalk.com/d/14/01/15/abunuva9.jpghttp://img.tapatalk.com/d/14/01/15/8a7ygasy.jpg
And cleaned up the wiring in the relays. Had to do that to get accurate dimensions to start working on the cad.
http://img.tapatalk.com/d/14/01/15/yqunadyg.jpghttp://img.tapatalk.com/d/14/01/15/aryhypa3.jpghttp://img.tapatalk.com/d/14/01/15/dusaty6a.jpg
That's all for now. Stay tuned...
s4 IG-petefromthestreets
Cage plus radio member #1
This is awesome! Aidan's gonna know more than me by the time he's 6 if he's working with you! And that's awesome, he'll get all the chicks (@civicgrl89)Quote:
Originally Posted by PetefromtheStreets
He stunts hard man!Quote:
Originally Posted by PetefromtheStreets
I like the bracket layout! Box is a great idea. Where are you going to mount it in the car, the front bumper?Quote:
Originally Posted by PetefromtheStreets
Awesome! I took CAD 1 and 2 back in high school. I loved that program! Talk about intricate, and this was 7 or 8 years ago. Must be far more developed by now! And as far as the chain guide is concerned, I remember [MENTION=209]ksboi[/MENTION] posted a chain guide or chain protector a while back which was definitely a good idea. You think about that?Quote:
Originally Posted by PetefromtheStreets
That was a lower timing chain guide and he actually just got one. I put one on my motor while doing the timing chain and it's nice, keeps the chain in the right spot even if tensioner and all other guides are removed. Would be very helpful with doing cam changes, but also adds some reassurance that the chain won't jump a tooth.Quote:
Originally Posted by Si Speed 317
Haha yea he should know quite a bit by then. If he's interested that is. And Yup hell have a turbo or Supercharged car in high school. That should bring in some girls.Quote:
Originally Posted by Si Speed 317
And thanks the relays will be mounted in the wheel well bumper area Yup! And the box should help keep moisture out. Cad work on the new magics is a pain. My boss is actually making it with the specs I have and he was having a tough time finding all the commands on there.
And [MENTION=185]aLmk[/MENTION] is right. I bought a lower timing chain guide. Is on the motor in a couple pics. Gotta zoom in close to the oil pump
s4 IG-petefromthestreets
Cage plus radio member #1