After putting in work for the past couple hours.....
http://farm9.staticflickr.com/8365/8...2efa1a61_c.jpg
Printable View
After putting in work for the past couple hours.....
http://farm9.staticflickr.com/8365/8...2efa1a61_c.jpg
So i pretty much finished all i needed to dew this weekend, time is going by fast and i only have a couple weeks to be running and tuned out for the upcoming event.
First off all this couldnt have been possible if i wouldnt have had received the vband clamp that i purchased from the Anthony that was shipped to me from All in Fab on Thur and got to me Sat morning, i honestly didnt have hope to get it till Mon. So here i present to ya my 2k13 setup!!
http://farm9.staticflickr.com/8386/8...6f88153d_c.jpg
http://farm9.staticflickr.com/8104/8...6a2cde9c_c.jpg
http://farm9.staticflickr.com/8377/8...7f7397e2_c.jpg
http://farm9.staticflickr.com/8365/8...9ac9ae74_c.jpg
http://farm9.staticflickr.com/8108/8...92a36704_c.jpg
http://farm9.staticflickr.com/8086/8...5450d886_c.jpg
http://farm9.staticflickr.com/8378/8...54227215_c.jpg
http://farm9.staticflickr.com/8229/8...702c818b_c.jpg
http://farm9.staticflickr.com/8234/8...d0fd5a07_c.jpg
I here show the diff in thickness and strength if the AEM tubing vs Anthony's tubing for the vac kit.
On the left is the AEM. I had to upgrade to 14ft from pump to nozzle due to the new turbo placement and Anthony was generous to hook me up with 20ft free of charge.:bow:
http://farm9.staticflickr.com/8246/8...7c6ce545_c.jpg
http://farm9.staticflickr.com/8523/8...a917763b_c.jpg
http://farm9.staticflickr.com/8232/8...cfd29417_c.jpg
http://farm9.staticflickr.com/8516/8...00f3cdbc_c.jpg
just read through the whole thread. Awesome car man definantly my favourite ep3 yet. Only thing im worried about is your dump tube melting your cowl when it gets hot. Not sure if you have a plan for that or not.. and as for making the dump unique, i just like the tip cut back on a 45* angle, nothing too outrageous but a nice touch to it.
Keep up the good work ill be following this one to see the finished result!
Yea at the moment i dont care bout the cowl cause down the rd i will coat the pipe and have a sheet metal cowl custom made for me that should be more heat tolerantQuote:
Originally Posted by Mercer
I agree with [MENTION=240]Mercer[/MENTION], monjarassi have you thought of creating a carbon fiber surround like people do with exhaust tips that get too close to bumpers or the ones that go around the hole that goes around a fender or bumper? That's a possibility
that sure is a possibility pal i need to find one nowQuote:
Originally Posted by Spoolin_VTEC
Final pieces have arrived and off to get the dumptube welded and downpipe fitted.
Cant wait to start her up!!
http://farm9.staticflickr.com/8249/8...130ae753_c.jpg
http://farm9.staticflickr.com/8520/8...b8cca800_c.jpg
http://farm9.staticflickr.com/8229/8...d89fc278_c.jpg
Same plugs I use also. Can't wait to see this thing in action man. :thumb:
Tell me about it!!!Quote:
Originally Posted by Adm_rsx
ITS GOING TO BE AWESOME AND MAKE SOME SERIOUS POWER AND TORQUE WHILE LOOKING SEXY AT THE SAME TIME!Quote:
Originally Posted by monjarassi
Had to do it. But we're all excited about this I believe, did you figure out what you're going to surround the dump tube with around the cowl?