Skunk2 90mm ;-)Quote:
Originally Posted by monjarassi
Oh yea!! -10 AN on both ends with a -10 line feeding and a -8 return line :-)Quote:
Originally Posted by Si Speed 317
We're shooting for some 700s so hopefully with all this we'll get there!!!
Printable View
Skunk2 90mm ;-)Quote:
Originally Posted by monjarassi
Oh yea!! -10 AN on both ends with a -10 line feeding and a -8 return line :-)Quote:
Originally Posted by Si Speed 317
We're shooting for some 700s so hopefully with all this we'll get there!!!
Holy shit. -10 feeds and an -8an return. Damn!! Are those two separate -10 lines all the way from the tank? Meaning 1 from each pump?
:drooling:
the way it works is the -10 feed line pulls from both pumps at the same time and then it return fuel on the -8 no dual lines required :yay:Quote:
Originally Posted by Si Speed 317
:biggrin:Quote:
Originally Posted by monjarassi
Did you already get your exospeed 3 piece front for the car? Ive been hearing a lot that exospeed is no longer making the fronts, but CMR is making a similar?
Not yet, waiting on my friend to bring it by so i can mock it upQuote:
Originally Posted by boosted_teg
SOOOOO ANXIOUS TO SEE IT ON TOO!!!:FUU:
Had to tap and weld a small fitting to my Magnus for vacuum.... It didn't come with one.... Da fuq...
On a different note, I may be selling my Magnus over the winter and getting a Skunk2 Ultra Series to replace it
Sent from my SAMSUNG-SGH-I717 using Tapatalk
S2....... why??Quote:
Originally Posted by dkpr87
The s2 ultra is a Kinsler copy. Evidently is out preforming everything else out thereQuote:
Originally Posted by monjarassi
s4 IG-petefromthestreets
I like it's design and I've been wanting that one for a minute, but with Ks the manifolds that are proven are the Gato's, GE's, Prayontoo and Magnus so I might step it up to a Gato Center Feed or a Prayontoo Center Feed
Sent from my SAMSUNG-SGH-I717 using Tapatalk