So far is looking goodQuote:
Originally Posted by Si Speed 317
Thanks palQuote:
Originally Posted by Adm_rsx
Printable View
So far is looking goodQuote:
Originally Posted by Si Speed 317
Thanks palQuote:
Originally Posted by Adm_rsx
New, bigger injectors on and ready to roll
http://farm9.staticflickr.com/8239/8...32782041_c.jpg
Another weekend came and more work was done to the harness!! Thanks again to the homie Ryan for the work he put in...
The following sensors were re loomed:
Map, TPS, IAT, and boost solenoid
More to come..
http://farm9.staticflickr.com/8391/8...fd01b60e_c.jpg
http://farm9.staticflickr.com/8383/8...2ee2c82b_c.jpg
http://farm9.staticflickr.com/8402/8...de73209b_c.jpg
http://farm9.staticflickr.com/8239/8...c519dd05_c.jpg
http://farm9.staticflickr.com/8395/8...67997345_c.jpg
http://farm9.staticflickr.com/8113/8...462284d5_c.jpg
http://farm9.staticflickr.com/8126/8...25025621_c.jpg
http://farm9.staticflickr.com/8528/8...222da4e7_c.jpg
Everything looks great! Are you considering moving to a 4 port boost control solenoid?
no not in the near future, my frien with his fully built rsx just lifted his head due to that 4 port and im staying away from itQuote:
Originally Posted by aLmk
:confused: how did a boost control solenoid cause his head to lift?
Overboosted!!!! I thunk it allowed the turbo to squeeze 34lbs + and lifted his head. Not sure if it was tuner error or install error.Quote:
Originally Posted by aLmk
Sounds like it did the job though. Id say tuner error. With advancements in technology comes new shit to learn. The 4 port would hold boost better than a 3 port. Seems to me like head studs weren't torqued properly.Quote:
Originally Posted by monjarassi
I don't think it was either error, just that his head gasket possibly failed and/or he needs to torque his head studs more. Vit had the same problem on his motor and torquing the head studs more and a cosworth head gasket fixed it. The 4 port works in the same was as the 3 port in that if it fails or is turned off, you run right off the wastegate.Quote:
Originally Posted by monjarassi
Either or studs were new and tqed over specs and well who knows what really happened.Quote:
Originally Posted by Si Speed 317
So hows everything going?
perfect we just got the pte 1000's dialed in to idle perfect and tuning part throttle now to move on to WOT!!!Quote:
Originally Posted by Si Speed 317
Thats awesome! Hows the gate exit going, anything melt yet? :-XQuote:
Originally Posted by monjarassi
the gate exit is sick, i love it!!!! and despite the criticism nothing has melted at all!!! Thats good for me, i get to keep happy boosting.Quote:
Originally Posted by Si Speed 317
Thats awesome! Glad to hear it bud. Happy = Boosting ;)Quote:
Originally Posted by monjarassi
NICE BUILD! Love ep3's!
Quote:
Originally Posted by Si Speed 317
thanks!!! more to come fellasQuote:
Originally Posted by Raizo777
dirty cell phone pic!!! temp wheels till new ones are chosen...
http://farm9.staticflickr.com/8107/8...facbe787_z.jpg
Damn. She looks mean!!
hell yea it does
Rainy weather here in tx and what way to cheer up, work on the racekar hardparked!!
http://farm9.staticflickr.com/8104/8...32a59f70_c.jpg
Love that pic!
thanks bro and your gate looks to be leaking at the base hughQuote:
Originally Posted by aLmk
Ya that's what it looks like. I'm not sure why any thoughts as to what I could do? It was on quite tight and tial says you only need 7 ft/lbs to get a seal with those clamps, which is nothing.
yea i tightened mine to 10lbs tq and till now no leak, hmmmm maybe the flange is warped and its not creating a full round seal, thats a thoughtQuote:
Originally Posted by aLmk
This.Quote:
Originally Posted by monjarassi
It's a possibility. Any way to test that with the manifold still on the car? And there is no way I can get a torque wrench in where I am working, my 1/4'' wrench barely fits, but I am quite positive I have torqued it past 10 ft/lbs as that also is not much torque at all.Quote:
Originally Posted by monjarassi
Testing it on the car i dont think itll be a possibility sorry, and i know man your car is PITA to work on, i installed a greddy turbo kit once on a fa5, never will i again.Quote:
Originally Posted by aLmk
LOL the greddy kit is kinda easier. Its top mount so you can do it without lowering subframe. This type of setup not so much! lol O well. I'm going to clean the mating surfaces as best I can and hope that works, if it still creeps I guess next thing is to have that flange tested.... :(Quote:
Originally Posted by monjarassi
Gl man and dont let this lil hiccup put u dwn we all have been there done that and maintaining a positive attitude will overcome this lil prob.Quote:
Originally Posted by aLmk
Thanks
Love this pic! One of the sexiest ep3's i've seen.Quote:
Originally Posted by monjarassi
Agreed 100%. Love that shot man!Quote:
Originally Posted by Raizo777
Small photoshoot after my alignment!!!!!
Hope ya enjoy my new shoes
http://farm9.staticflickr.com/8243/8...302d8a00_c.jpg
http://farm9.staticflickr.com/8248/8...7393dd34_c.jpg
http://farm9.staticflickr.com/8264/8...9a8879fb_c.jpg
http://farm9.staticflickr.com/8264/8...bdfc4581_c.jpg
http://farm9.staticflickr.com/8245/8...6432b975_c.jpg
Love the look man. But why did you get rid of the old wheels?
And is your roof gutted? Looks like it from a picture.
i have them up for sale doh!!!Quote:
Originally Posted by Adm_rsx
And i want new wheels, new ye new thangs...
And yea the roof is gutted, dot the headliner in blck suede and never got to install it
Oh gothca gotcha. Ballin!Quote:
Originally Posted by monjarassi
Wheels look dope!