Rebuild take IV

Quote:

---

Originally Posted by Si Speed 317

Tell me how you really feel

---

Haha that's how I feel.

Quote:

---

Originally Posted by aLmk

Ya did you have any luck with the counter shaft bearing sliding out of the c clip?

---

Should get another chance to work on the car tonight. I had my son last night. I don't work on the car when I have him so today's my next chance.

s4 IG-petefromthestreets
Cage plus radio member #1

How'd your tranny wrestling match go last night? ;)

Quote:

---

Originally Posted by Si Speed 317

How'd your tranny wrestling match go last night? ;)

---

The bitch just won't let go. I've done 15 transmissions and not 1 time had this issue. I have to buy a new case. I'm going to have to cut this one open.

s4 IG-petefromthestreets
Cage plus radio member #1

There's gotta be something. Maybe bring it to SRT and see if they can get it open? Or maybe [MENTION=83]vdubkilla[/MENTION] can suggest something

Quote:

---

Originally Posted by Si Speed 317

There's gotta be something. Maybe bring it to SRT and see if they can get it open? Or maybe [MENTION=83]vdubkilla[/MENTION] can suggest something

---

It's really that there is something keeping the bearing locked in. Most likely a piece of broken metal. I went and bought a couple pair of snap ring pliers even tho I've never needed them. I just used needle nose pliers. And in trying everything under the sun to get the clip free I've damaged the threads

s4 IG-petefromthestreets
Cage plus radio member #1

Quote:

---

Originally Posted by PetefromtheStreets

It's really that there is something keeping the bearing locked in. Most likely a piece of broken metal. I went and bought a couple pair of snap ring pliers even tho I've never needed them. I just used needle nose pliers. And in trying everything under the sun to get the clip free I've damaged the threads

s4 IG-petefromthestreets
Cage plus radio member #1

---

Damn man, that sounds like a fucking pain in the ass

Quote:

---

Originally Posted by Si Speed 317

There's gotta be something. Maybe bring it to SRT and see if they can get it open? Or maybe [MENTION=83]vdubkilla[/MENTION] can suggest something

---

I had made a suggestion the other night but Adam had already tried that .He'll get it one way or another eventually .Stuff like that can be aggravating and time consuming yet educational haha let us know how ya make out with it .

Quote:

---

Originally Posted by vdubkilla

I had made a suggestion the other night but Adam had already tried that .He'll get it one way or another eventually .Stuff like that can be aggravating and time consuming yet educational haha let us know how ya make out with it .

---

Yea man I'm no noob to this and it's kicking my ass. Lol I've already damaged the threads and one I did that the "Fuck this case" hit me. I'll cut the bitch out.

s4 IG-petefromthestreets
Cage plus radio member #1

I know and that makes it all the more aggravating when you have done stuff several times and run into issues due to something simple but it happens .

Finished pulling the motor out tonight. Took a couple pics and then a fast motion video clip of removal. Just wanted to play around with it and I'm also trying to take more pictures of the progress in total. Still need to order the case and bearings along with new flywheel and final drive bolts. They have been reused 3 times so I'd say it's time to replace.
http://img.tapatalk.com/d/14/02/05/ehutyved.jpg
http://img.tapatalk.com/d/14/02/05/y9ere3am.jpg
http://img.tapatalk.com/d/14/02/05/3u4ade9u.jpg
http://img.tapatalk.com/d/14/02/05/avetuzy6.jpg


s4 IG-petefromthestreets
Cage plus radio member #1