aLmk's Turbo FA5

Enjoy brotha

Thanks! I'll probably text you tomorrow with my last question or two. Sorry to bother you!

No problem, ill be driving to cali all day so if I don't respond right away be patient with me...lol

Alright here are a few more pics.
http://i1134.photobucket.com/albums/...ps7d355a58.jpg
How does this wheel look to everyone?
http://i1134.photobucket.com/albums/...ps094a6777.jpg
http://i1134.photobucket.com/albums/...ps318fe416.jpg
http://i1134.photobucket.com/albums/...ps0bde6976.jpg
And do you guys think I should replace this vband clamp is a little twisted. I'm leanings towards replacing it.
http://i1134.photobucket.com/albums/...ps33578601.jpg

Alright here are some pics. From what I can tell it doesn't look horrible. But I also don't know what horrible looks like :shrug:
http://i1134.photobucket.com/albums/...psb318f57a.jpg
http://i1134.photobucket.com/albums/...ps225ad6f1.jpg
http://i1134.photobucket.com/albums/...ps590caa61.jpg
http://i1134.photobucket.com/albums/...ps212f156a.jpg

Let me know what you guys think. Thanks!

Any thoughts? I'm thinking I'm going to try it as is. The scoring you can hardly feel with your fingers.

I would perhaps lightly take a file or fine sandpaper (400 or 600 grit) to the burrs on the impeller. But I wouldn't worry about the cover at all. I would also check for shaft play as I'd wonder why there's any burrs on the impeller to begin with. But that's me and my $.02

I would replace the vband clamp for sure, and the housing is fine. For the impeller blades, follow adams instructions. Be very light, barely touching it. As long as shaft play is minimal, you're fine.

Quote:

---

Originally Posted by Adm_rsx

I would perhaps lightly take a file or fine sandpaper (400 or 600 grit) to the burrs on the impeller. But I wouldn't worry about the cover at all. I would also check for shaft play as I'd wonder why there's any burrs on the impeller to begin with. But that's me and my $.02

---

Quote:

---

Originally Posted by Si Speed 317

I would replace the vband clamp for sure, and the housing is fine. For the impeller blades, follow adams instructions. Be very light, barely touching it. As long as shaft play is minimal, you're fine.

---

Thanks for the advice. The turbo has no shaft play. It's because the turbo was used without a filter for about 2 weeks.

Bought:

• 2x 3'' vband clamps
• 1x 3'' stainless steel vband flange
• 1x 2.5" t-bolt clamp for 2" connections
• 2x M8x1.25x100mm bolts
• 1x PTP turbo blanket
• 1x DEI heat jacket for wires

Still need:

• Small amount of DEI gold foil
• 1x OEM exhaust manifold gastket
• New ecav setup

Install date is coming soon!
Second post updated!