any more detailed pictures on your sheet metal work ?
Printable View
any more detailed pictures on your sheet metal work ?
non really didnt take much but itll be similar to what u did doh
Did the new tensioner not solve your problems? I am in the middle of changing my tension, chain, guides, etc... It is rough, but can definitely all be done with the motor in the car. I have everything in, just need an o-ring so I can put the chain case back on.
Well it was an issue but no.Quote:
Originally Posted by aLmk
I think the crankshaft pulse plate is broken thats why i cant start the car. Its been a rough 4weeks dealing with this pain. Chain cover is coming off for me today after work to dig deeper
Gotcha! Well good luck, I hope you have a thin ratchet!Quote:
Originally Posted by monjarassi
I actually went out and bought one of these:
http://toolguyd.com/blog/wp-content/...atchet-Set.jpg
Was super helpful for getting the cover bolts out.
yea on the ep3 chassis we have bout 1-1.75in if clearance so last night i removed all my bolts at ease.
Thanks doh
Nice :thumb:
I hope you made a DIY for that!Quote:
Originally Posted by aLmk
I have a bunch of pictures, I could probably pull one together. Snizzletoff already pretty much has one on here, not much more to say other than take all the bolts out...Quote:
Originally Posted by Si Speed 317
finally the sleepless night of torment are over. The racekar is alive and well once again!!
this was the problem all along...
http://farm8.staticflickr.com/7422/9...d3e9139e_c.jpg
to this
http://farm8.staticflickr.com/7309/9...d252bcb6_c.jpg
and back to happy driving :vtec:
http://farm4.staticflickr.com/3811/9...f8d1bc82_b.jpg