New guy here! 600whp or bust build

Quote:

---

Originally Posted by My07si

Yes the two gates are to prevent creep, comp turbo actually recommend that we use two mvs(38mm) gates over a single 44mm or 60mm that's why we did that, and the idea of the exhaust gasses gathering is what we are interested to test. The dumps will shoot straight down in front of the tranny and then I will have a second set if dumps and a second downpipe that will flip and come straight out the hood eventually. Either way creep should be completely eliminated on this setup

---

Ya you should be able to run 3-4 psi all the way to redline. I know Vit's manifold only creeps one psi from 3-4 by 9k rpm even with his 850hp turbo. Yours is similar design giving wastegate priority. I like it! You guys plan to release this to the public as an option?

Quote:

---

Originally Posted by My07si

Manifold was definately designed and built with wastegate priority coming straight off the 90 so when opened the exhaust gasses will flow straight through the gates

---

Ya looks good!

Quote:

---

Originally Posted by My07si

Yes it is boost Junkyz design and fab, and they are dual 38mm gates but 76mm or 3" should release plenty if exhaust lol. The gates and turbo are well above the tranny and the dumps may route down and out to the drivers side to keep the heat off the tranny still a work in progress . We shall see how she does.

---

Could always wrap the dump tubs/ceramic coat them. That should be plenty. Its not like they are open constantly.

Quote:

---

Originally Posted by My07si

Yes it is boost Junkyz design and fab, and they are dual 38mm gates but 76mm or 3" should release plenty if exhaust lol. The gates and turbo are well above the tranny and the dumps may route down and out to the drivers side to keep the heat off the tranny still a work in progress . We shall see how she does.

---

Nice, and ok 76mm total still a great setup. And I realized that since the first gate is on the 90* and the second is atter it, it will be real efficient because the gases are then directed AT the second gate after the bend. Legit stuff. And definitely let me know how the dump routing goes.

Quote:

---

Originally Posted by My07si

http://img.tapatalk.com/d/13/04/28/a4emyreq.jpg

http://img.tapatalk.com/d/13/04/28/a2u8a7yt.jpg

---

Looks great

Quote:

---

Originally Posted by My07si

Just finished a fg2 install at the shop using a gtx3076r and 44mm gate, will be tuning next week , ill post the results

http://img.tapatalk.com/d/13/04/28/ge2unyge.jpg

http://img.tapatalk.com/d/13/04/28/eha4eqad.jpg

http://img.tapatalk.com/d/13/04/28/u4yvyryd.jpg

---

Nice, all boostjunkyz in house made?

Quote:

---

Originally Posted by Adm_rsx

[MENTION=2]Si Speed 317[/MENTION] you should have boostjunkyz make you one also.

---

I would, but I'll probably just go local. I emailed him a little while back about custom making me something and he never got back to me. He was probably busy or forgot about it. But no response doesn't make me a happy camper.

Quote:

---

Originally Posted by Si Speed 317

I would, but I'll probably just go local. I emailed him a little while back about custom making me something and he never got back to me. He was probably busy or forgot about it. But no response doesn't make me a happy camper.

---

Same here. I wanted something custom as well. But seeing as I have an rsx it would be harder to make. But like you, I never got a response.

Quote:

---

Originally Posted by Si Speed 317

Nice, and ok 76mm total still a great setup. And I realized that since the first gate is on the 90* and the second is atter it, it will be real efficient because the gases are then directed AT the second gate after the bend. Legit stuff. And definitely let me know how the dump routing goes.

Looks great

Nice, all boostjunkyz in house made?

I would, but I'll probably just go local. I emailed him a little while back about custom making me something and he never got back to me. He was probably busy or forgot about it. But no response doesn't make me a happy camper.

---

Yes all made in house , sux about not getting a response man, very busy combined with having to fab and respond to all emails as keep up with all the daily local business gets tough lol.

Quote:

---

Originally Posted by Adm_rsx

Same here. I wanted something custom as well. But seeing as I have an rsx it would be harder to make. But like you, I never got a response.

---

Well, at least you have a lot more room than we do haha. And I have a one-off top mount turbo manifold, so it would be hard no matter what unfortunately. I gotta get a move on this stuff, I only have off work on Mondays and I always have family stuff to get done so I have no time to work on the car. And no garage to keep it in unfortunately. Blah.

Quote:

---

Originally Posted by My07si

Yes all made in house , sux about not getting a response man, very busy combined with having to fab and respond to all emails as keep up with all the daily local business gets tough lol.

---

Don't get me wrong, I understand completely. Sucks though, especially now since he's 0-2 for 2 people for work on a boosted k-series forum. :shrug: At least he does great welding. Just hope he doesn't become another Derek :hiding: [MENTION=28]Spaz[/MENTION]

Quote:

---

Originally Posted by Si Speed 317

Well, at least you have a lot more room than we do haha. And I have a one-off top mount turbo manifold, so it would be hard no matter what unfortunately. I gotta get a move on this stuff, I only have off work on Mondays and I always have family stuff to get done so I have no time to work on the car. And no garage to keep it in unfortunately. Blah.



Don't get me wrong, I understand completely. Sucks though, especially now since he's 0-2 for 2 people for work on a boosted k-series forum. :shrug: At least he does great welding. Just hope he doesn't become another Derek :hiding: [MENTION=28]Spaz[/MENTION]

---

Yeah man hopefully in the future the company will be able to grow and take on alot more jobs and spend more time focusing on out of state stuff, right now being swamped with local and a couple fg kits has definately halted any new things

http://img.tapatalk.com/d/13/05/12/hary9a3u.jpg

http://img.tapatalk.com/d/13/05/12/abeta6ub.jpg

http://img.tapatalk.com/d/13/05/12/hegujabu.jpg

http://img.tapatalk.com/d/13/05/12/su9e9u3e.jpg

http://img.tapatalk.com/d/13/05/12/enesebyv.jpg

Got a bunch of work done yesterday, all that's left as far as metal fab is , the second half of the downpipe, catch can, intake manifold and weld the bov flange on, getting closer

have any complete pictures of the manifold with the extension piece on it?

It's looking great man. Thumbs up!

s4 petefromthestreets

http://img.tapatalk.com/d/13/05/12/6epy8apu.jpg

I have none of it off the car bolted together

that works! Looks good for sure. im surprised more people don't do this.

Looks amazing!!

Sent from my HTCONE using Tapatalk 2

Quote:

---

Originally Posted by boosted_teg

that works! Looks good for sure. im surprised more people don't do this.

---

It's alot of work, and thanks

Quote:

---

Originally Posted by snizzletoff

Looks amazing!!


Sent from my HTCONE using Tapatalk 2

---

I like it, thanks man

http://img.tapatalk.com/d/13/05/13/6usunuha.jpg

My turbo being punked by his big brother, the big one is going on a fwd pro car, going to be gangster .

Quote:

---

Originally Posted by boosted_teg

that works! Looks good for sure. im surprised more people don't do this.

---

He had to relocate a shit load of stuff and or delete stuff like EVAP.

Looks great btw!

i suppose in his chassis be a lot of work, but in an eg/ek/dc like mine, it wouldnt be much. I hate creep, and i have it.

Well ya be shouldn't have any creep!

Updates? This came out so sick!

Quote:

---

Originally Posted by boosted_teg

i suppose in his chassis be a lot of work, but in an eg/ek/dc like mine, it wouldnt be much. I hate creep, and i have it.

---

Have you looked into a 4-port electronic boost controller?

So I got the car back and am just about done putting it all back together! Just finishing up the plumbing and waiting to get my intake manifold back tomorrow !

Relocated the ecu, all battery cables relocated, battery is under the bumper.

http://img.tapatalk.com/d/13/06/10/u4e2u8ep.jpg

Box of goodies

http://img.tapatalk.com/d/13/06/10/va6a5a8y.jpg

http://img.tapatalk.com/d/13/06/10/yhurezyt.jpg

http://img.tapatalk.com/d/13/06/10/9agy2ezy.jpg

http://img.tapatalk.com/d/13/06/10/yrurydag.jpg

More updates and pictures after its all done, powdercoating a few parts, and should be on the road sometime during the week!

http://img.tapatalk.com/d/13/06/10/ama9yny6.jpg

http://img.tapatalk.com/d/13/06/10/mezysemu.jpg

http://img.tapatalk.com/d/13/06/10/9aru4aja.jpg

245/40/16 ;)

http://img.tapatalk.com/d/13/06/10/avunume8.jpg

http://img.tapatalk.com/d/13/06/10/ragebu9a.jpg

^^^^^this comp turbo makes my 6062 look tiny!

Quote:

---

Originally Posted by My07si

So I got the car back and am just about done putting it all back together! Just finishing up the plumbing and waiting to get my intake manifold back tomorrow !

Relocated the ecu, all battery cables relocated, battery is under the bumper.

http://img.tapatalk.com/d/13/06/10/u4e2u8ep.jpg

Box of goodies

http://img.tapatalk.com/d/13/06/10/va6a5a8y.jpg

http://img.tapatalk.com/d/13/06/10/yhurezyt.jpg

http://img.tapatalk.com/d/13/06/10/9agy2ezy.jpg

http://img.tapatalk.com/d/13/06/10/yrurydag.jpg

More updates and pictures after its all done, powdercoating a few parts, and should be on the road sometime during the week!

---

Where was the car? What are you doing about the transmission?

Quote:

---

Originally Posted by My07si

http://img.tapatalk.com/d/13/06/10/ama9yny6.jpg

http://img.tapatalk.com/d/13/06/10/mezysemu.jpg

http://img.tapatalk.com/d/13/06/10/9aru4aja.jpg

245/40/16 ;)

http://img.tapatalk.com/d/13/06/10/avunume8.jpg

http://img.tapatalk.com/d/13/06/10/ragebu9a.jpg

^^^^^this comp turbo makes my 6062 look tiny!

---

What is that wiring thing going into the wheel well? Also is that intercooler the same as the one I have minus the piping coming off it. I'm wondering if I can modify it like that to make it so a bumper will fit without cutting and fix my charge pipe in wheel well issue.
Everything looks sweet! Can't wait to see the numbers and some videos!

My car was at the shop, it's at my house to do all the wiring, and plumbing.

Same intercooler but 3.5" thick instead of 3"

Wiring is not all supported, not sure if your talking about my headlight harness, or the battery cables?

Quote:

---

Originally Posted by My07si

My car was at the shop, it's at my house to do all the wiring, and plumbing.

Same intercooler but 3.5" thick instead of 3"

---

Ok did you delete the AC cooler that sits in front of the radiator? I was messing with my piping today to get better clearance in my wheel well, so I had my bumper off and I was looking at mine at comparing it to your picture. I'm just curious how you got 2, 2.5'' pipes to fit in that spot right off the intercooler. I can see you removed the plastic shield thing, but even with that gone I'm not sure there would be a whole lot of room. Tough to tell in that photo if the AC cooler thing (sorry don't know technical name) is there.

Quote:

---

Originally Posted by My07si

Wiring is not all supported, not sure if your talking about my headlight harness, or the battery cables?

---

Gotcha, makes sense.

And I was able to get a bit more clearance in my wheel well, and my wheel was not hitting the fender liner on a full right turn, I just hope it also has enough clearance for 15x8 wheels with 24.5x85 slicks.

Quote:

---

Originally Posted by aLmk

Ok did you delete the AC cooler that sits in front of the radiator? I was messing with my piping today to get better clearance in my wheel well, so I had my bumper off and I was looking at mine at comparing it to your picture. I'm just curious how you got 2, 2.5'' pipes to fit in that spot right off the intercooler. I can see you removed the plastic shield thing, but even with that gone I'm not sure there would be a whole lot of room. Tough to tell in that photo if the AC cooler thing (sorry don't know technical name) is there.

Gotcha, makes sense.

And I was able to get a bit more clearance in my wheel well, and my wheel was not hitting the fender liner on a full right turn, I just hope it also has enough clearance for 15x8 wheels with 24.5x85 slicks.

---

No the a/c condenser is still there, after the plastic was removed I ground out the corner sheet metal and then capped and welded a plate over the ground down part of the core support for support . Hard to explain but ill see if I can find the pictures I took with my dslr .

Quote:

---

Originally Posted by My07si

No the a/c condenser is still there, after the plastic was removed I ground out the corner sheet metal and then capped and welded a plate over the ground down part of the core support for support . Hard to explain but ill see if I can find the pictures I took with my dslr .

---

That makes enough sense. I won't be doing this, I was just looking at it today since I had the bumper off and was like DAMN how did he fit 2, 2.5'' pipes in there? :giggle: But removing the plastic and doing some grinding away sounds about right.

Yeah I had to and am still doing a bunch of modifying to make this thing work lol, should be pretty cool when it's all said and done!

Did some powder coating today! Did this on my own in my back yard lol,

http://img.tapatalk.com/d/13/06/11/ysa3uqeg.jpg
http://img.tapatalk.com/d/13/06/11/darymame.jpg
http://img.tapatalk.com/d/13/06/11/ta7y5ema.jpg
http://img.tapatalk.com/d/13/06/11/2abubapa.jpg
http://img.tapatalk.com/d/13/06/11/3e6emyby.jpg
http://img.tapatalk.com/d/13/06/11/ra6uhyry.jpg

http://img.tapatalk.com/d/13/06/11/edynysa3.jpg

Quote:

---

Originally Posted by Si Speed 317

Have you looked into a 4-port electronic boost controller?

---

no i havent. would that actually make a difference over a 3 port? i know you can run a lower psi spring and run higher boost pressire

Quote:

---

Originally Posted by My07si

http://img.tapatalk.com/d/13/06/11/edynysa3.jpg

---

They came out awesome!
Do you mind sharing what powdercoating "home kit" you used? Assuming that because it was done in your backyard - which is great i might add!

Quote:

---

Originally Posted by boosted_teg

no i havent. would that actually make a difference over a 3 port? i know you can run a lower psi spring and run higher boost pressire

---

Yea, those are correct. It also allows the turbo to spool quicker because it actually keeps your gate shut. I know you have creep, and I've read in a few places that 4-port ebc's helped/fixed it (depending on severity of creep, of course).

hmm ill have to look into it more. The quick spool option on kpro works in the same manner with the 3 port ebc. Thanks

Quote:

---

Originally Posted by Si Speed 317

They came out awesome!
Do you mind sharing what powdercoating "home kit" you used? Assuming that because it was done in your backyard - which is great i might add!






Yea, those are correct. It also allows the turbo to spool quicker because it actually keeps your gate shut. I know you have creep, and I've read in a few places that 4-port ebc's helped/fixed it (depending on severity of creep, of course).

---

It's just a craftsman powdercoating gun i got off amazon, and old standard convection over that used to be in my kitchen and some powder from rosiespowdercoat.com

Quote:

---

Originally Posted by boosted_teg

hmm ill have to look into it more. The quick spool option on kpro works in the same manner with the 3 port ebc. Thanks

---

It functions the same yes, but the 4 port just is much more effective at actually keeping the gate shut. I doubt the change will fix your boost creep though. That is a different issue.

http://img.tapatalk.com/d/13/06/14/8edegude.jpg

This thing finally f'ing showed up! Can't wait to install it and see how it feels! 3 and a half months later

Jesus 3 and a half months? It does look pretty sweet though!

Quote:

---

Originally Posted by aLmk

Jesus 3 and a half months? It does look pretty sweet though!

---

Yeah I guess they were on back order, instead of paying 25% restocking fee for something that was back ordered I just waited .

http://img.tapatalk.com/d/13/06/16/yhysade5.jpg

It's installed, just finishing up TC instal , then bolt everything back up and it should fire up tonight! I can't wait

Damn, thats a hell of a wait time. But it looks great! Well worth the wait IMO