BoostedK20 Chat!

Printable View

Show 40 post(s) from this thread on one page

10-16-2013
PetefromtheStreets

Quote:

Originally Posted by monjarassi

im just gonna stick with the treadstone one... :party:

It's a :party: it's a :party:

s4 IG-petefromthestreets
10-16-2013
Bottled Morphine

Let's hope that holds true
10-16-2013
vdubkilla

Quote:

Originally Posted by monjarassi

And here is the trv25 on a rsx

http://i462.photobucket.com/albums/q...1028001519.jpg

I have this one on my eg and it works well for me
10-16-2013
Bottled Morphine

Quote:

Originally Posted by vdubkilla

I have this one on my eg and it works well for me

How much hp or psi if you don't mind me asking.

Sent from my HTC One using Tapatalk
10-16-2013
vdubkilla

Quote:

Originally Posted by Bottled Morphine

How much hp or psi if you don't mind me asking.

Sent from my HTC One using Tapatalk

It sees over 550 regularly and I have had it over 650 w/o issue and typical 18 - 24 lbs it has seen 30 psi plus on an old t 3 manifold I had that creeped bad .
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by vdubkilla

It sees over 550 regularly and I have had it over 650 w/o issue and typical 18 - 24 lbs it has seen 30 psi plus on an old t 3 manifold I had that creeped bad .

Stock motor nonetheless

s4 IG-petefromthestreets
10-16-2013
vdubkilla

Quote:

Originally Posted by Adm_rsx

Stock motor nonetheless

s4 IG-petefromthestreets

Not any more lol although I did push the stock engine to 585/414 and it hit boost cut many many times at 30 psi
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by vdubkilla

Not any more lol although I did push the stock engine to 585/414 and it hit boost cut many many times at 30 psi

K series ftw. LOL

s4 IG-petefromthestreets
10-16-2013
vdubkilla

Quote:

Originally Posted by Adm_rsx

K series ftw. LOL

s4 IG-petefromthestreets

Oh indeed I love when ya go by somebodys house raising hell and then get a text or a fb message LOL saying Got Dam man was that u hahahaha
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by vdubkilla

Oh indeed I love when ya go by somebodys house raising hell and then get a text or a fb message LOL saying Got Dam man was that u hahahaha

Lmaooo exactly. Seems my car runs best on the street. Every time I visit the track I end up towing it home lol

s4 IG-petefromthestreets
10-16-2013
vdubkilla

Quote:

Originally Posted by Adm_rsx

Lmaooo exactly. Seems my car runs best on the street. Every time I visit the track I end up towing it home lol

s4 IG-petefromthestreets

I always break mine on the street believe it or not but its probably from the abuse it has seen on the track in the past those 6500 rpm launches .I'm gonna keep it off the track for now and like you said have fun on the street with it .
10-16-2013
monjarassi

any pix of the fmic palcement on ur car??
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by vdubkilla

I always break mine on the street believe it or not but its probably from the abuse it has seen on the track in the past those 6500 rpm launches .I'm gonna keep it off the track for now and like you said have fun on the street with it .

Lmaooo I hear you I launched At 7k my first season boosted Lol noob mistake

s4 IG-petefromthestreets
10-16-2013
echo3gulf

I have an Swift Racing Technology intercooler for sale if your interested [MENTION=40]monjarassi[/MENTION]
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by echo3gulf

I have an Swift Racing Technology intercooler for sale if your interested [MENTION=40]monjarassi[/MENTION]

Fun fact: that company moved right next door to my job. Can't wait to hear them dynoing

s4 IG-petefromthestreets
10-16-2013
monjarassi

Quote:

Originally Posted by echo3gulf

I have an Swift Racing Technology intercooler for sale if your interested [MENTION=40]monjarassi[/MENTION]

Pm me price.
10-16-2013
Lilwhit14

Trying to figure out why my car is throwing a PCM failure code and why it only does it in my higher gears, 4-6
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by Lilwhit14

Trying to figure out why my car is throwing a PCM failure code and why it only does it in my higher gears, 4-6

Alternator issue? Too little current for the load?

s4 IG-petefromthestreets
10-16-2013
Bottled Morphine

Quote:

Originally Posted by Adm_rsx

Fun fact: that company moved right next door to my job. Can't wait to hear them dynoing

s4 IG-petefromthestreets

I'm headed up there soon to check that out!

Sent from my HTC One using Tapatalk
10-16-2013
Lilwhit14

Quote:

Originally Posted by Adm_rsx

Alternator issue? Too little current for the load?

s4 IG-petefromthestreets

Haven't thought about that. Never really crossed my mind bc I didn't think it would throw a ecu failure code
10-16-2013
aLmk

Quote:

Originally Posted by Adm_rsx

Fun fact: that company moved right next door to my job. Can't wait to hear them dynoing

s4 IG-petefromthestreets

O really? I've been to their old shop for a dyno day years back...
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by aLmk

O really? I've been to their old shop for a dyno day years back...

Yea their new shop doesn't have the dyno in yet. They are getting an AWD dyno now

s4 IG-petefromthestreets
10-16-2013
vdubkilla

Quote:

Originally Posted by monjarassi

any pix of the fmic palcement on ur car??

I'm not sure if you were talking to me or somebody else but I looked and the pics I can find of the ic all have a towel or blanket covering it as I generally do that while the bumper is off so I don't mess up the ic.
10-16-2013
monjarassi

thanks all i have found my fmic for my build!!!
10-16-2013
Bottled Morphine

Quote:

Originally Posted by monjarassi

thanks all i have found my fmic for my build!!!

The swift one?

Sent from my HTC One using Tapatalk
10-16-2013
monjarassi

Quote:

Originally Posted by Bottled Morphine

The swift one?

Sent from my HTC One using Tapatalk

yes
Huge 24"x 10.5" x 3" Front Mount Intercooler rated at 600+HP

- Garrett High Density Intercooler core,
- CAD designed and CNC machined end caps for optimized flow.
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by monjarassi

yes
Huge 24"x 10.5" x 3" Front Mount Intercooler rated at 600+HP

- Garrett High Density Intercooler core,
- CAD designed and CNC machined end caps for optimized flow.

Very nice man

s4 IG-petefromthestreets
10-16-2013
Bottled Morphine

Quote:

Originally Posted by monjarassi

yes
Huge 24"x 10.5" x 3" Front Mount Intercooler rated at 600+HP

- Garrett High Density Intercooler core,
- CAD designed and CNC machined end caps for optimized flow.

Nice man, it'll be sweet to see that thing installed on your build.

Sent from my HTC One using Tapatalk
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by Bottled Morphine

Nice man, it'll be sweet to see that thing installed on your build.

Sent from my HTC One using Tapatalk

TRUUU

s4 IG-petefromthestreets
10-16-2013
monjarassi

im thankfull to the member that stepped up and offered it.. Im in :love: with it and excited

http://www.8thcivic.com/forums/attac...-photo0027.jpg
10-16-2013
PetefromtheStreets

Quote:

Originally Posted by monjarassi

im thankfull to the member that stepped up and offered it.. Im in :love: with it and excited

http://www.8thcivic.com/forums/attac...-photo0027.jpg

Sick man. will look good on the ep3

s4 IG-petefromthestreets
10-16-2013
monjarassi

itll be a first too
10-17-2013
Bottled Morphine

Quote:

Originally Posted by monjarassi

itll be a first too

You fancy

Sent from my HTC One using Tapatalk
10-17-2013
PetefromtheStreets

Quote:

Originally Posted by Bottled Morphine

You fancy

Sent from my HTC One using Tapatalk

Lol he certainly is

s4 IG-petefromthestreets
10-17-2013
monjarassi

hehehehehe
10-17-2013
monjarassi

To all my built members in here, what assembly lube did yall use per preference when assebling bottom end and cylinder head??
10-17-2013
PetefromtheStreets

Quote:

Originally Posted by monjarassi

To all my built members in here, what assembly lube did yall use per preference when assebling bottom end and cylinder head??

Believe it molly assembly lube, or ARP assembly lube. I'll have to look at my father's house to be sure.

s4 IG-petefromthestreets
10-17-2013
Bottled Morphine

Quote:

Originally Posted by Adm_rsx

Believe it molly assembly lube, or ARP assembly lube. I'll have to look at my father's house to be sure.

s4 IG-petefromthestreets

Yeah I thought it was the arp lube

Sent from my HTC One using Tapatalk
10-17-2013
monjarassi

Quote:

Originally Posted by Bottled Morphine

Yeah I thought it was the arp lube

Sent from my HTC One using Tapatalk

I was looking for something thats good and can be found locally, dont want to be waiting on it to be shipped nor pay shipping
10-17-2013
PetefromtheStreets

Quote:

Originally Posted by monjarassi

I was looking for something thats good and can be found locally, dont want to be waiting on it to be shipped nor pay shipping

My local pepboys has some in stock. Try there if you have it in Texas

s4 IG-petefromthestreets

Show 40 post(s) from this thread on one page

All times are GMT -4. The time now is 10:34 PM.