Nice the guys at Auto Fair are good to deal with don't forget the Hondabond though .
Printable View
Nice the guys at Auto Fair are good to deal with don't forget the Hondabond though .
Thatll be in the oil pump shipmentQuote:
Originally Posted by vdubkilla
I keep that stuff on hand and use it on a lot of stuff its great sealant for sure .Which oil pump did ya get for the build a type S or other ?
type s was thinking of getting it modified to rev higher but meh ill keep it as isQuote:
Originally Posted by vdubkilla
Cool I have been running a type s pump for a while it has seen 9k rpms many times and generally sees 8800+ every time I drive the car .I have heard they begin to cavitate over 8800 but its only a few psi at 9k which probably isn't gonna hurt a thing .Quote:
Originally Posted by monjarassi
Thanks for sharing tht critical pc of info.Quote:
Originally Posted by vdubkilla
LOl I don't know if your kidding or being serious but the type s pump has worked well for me thus farQuote:
Originally Posted by monjarassi
I am being serious I was under the impression that I'd have to have it modified.Quote:
Originally Posted by vdubkilla
If your only gonna rev to 9 k it should be fine as mine has been although it probably wouldn't hurt to modify it but imo not necessary .I have abused my engines with the type s pump many times .
That's bad ass. I'm not much of a fan of high revving but this time around ill ride her till the power curve falls.Quote:
Originally Posted by vdubkilla
I'd rev mine higher with a better oil pump and cams if it still made power past 9 k .I hope to be doin cams this winter if funds allow along with the 4 port solenoid for boost control, lower wg springs and who knows I may end up doing an ERL s2k modified pump also and rev it a little higher as I love hearing that K series scream at 9k people say it sounds like a street bike coming by their house lol .
Well my bud who has a 768+hp rsx has the erl s2k pump and on the dyno @ only 15lbs making 500 hp it screams.
http://youtu.be/VUoke8aw7ho
Quote:
Originally Posted by monjarassi
Now That's what I'm talkin bout :heart:
Am out feeding these goblins candy!!! Why not.
http://farm4.staticflickr.com/3694/1...754bdeda_c.jpg
Nice pic man ! looks good !Quote:
Originally Posted by monjarassi
:awwyeah:Quote:
Originally Posted by vdubkilla
Yea it is. Very nice pic. :thumb:
s4 IG-petefromthestreets
Cage plus radio member #1
Quote:
Originally Posted by Adm_rsx
out of 20 shots this one hit the spot!!
Today i just out of the blue decided to relocate my fuse box from the driver side headlight to the passenger headlight, it made more sense due to the way the harness grommet off the firewall. Fit better too and only will have to extend 3 clips to be complete, high beam, city light, turn signal. Now the wait for RY-WORX to come and work his magic.
http://farm8.staticflickr.com/7392/1...5d857415_c.jpg
http://farm4.staticflickr.com/3741/1...553d1af5_c.jpg
:) looks exciting
After a long day of work and drive home from the chiropractor i finally get home safely to find the anticipated sweater i been waiting on finally arrived. Couldn't have came in at better moment.
For whom it may concern i was involved in collision in my STI on Tue and poor car got banged up badly. Thank god i wasnt hurt bad nor the other driver. In the mean time ya be safe out there, we cant control other drivers only ourselves.
http://farm8.staticflickr.com/7291/1...b9d1f255_c.jpg
http://farm4.staticflickr.com/3715/1...97613638_c.jpg
http://farm4.staticflickr.com/3819/1...44d12ee0_c.jpg
http://farm4.staticflickr.com/3764/1...2a9d6df2_c.jpg
If you havent yet purchased one or want one, i suggest u get you one, support our site!!
Glad your Ok man. I'm sorry to hear that.
s4 IG-petefromthestreets
Cage plus radio member #1
Thanks.Quote:
Originally Posted by Adm_rsx
Yeah man the car can be fixed or replaced .I hope you get feeling better man .
That's true. Feeling better already not gonna beat myself to it. Will be attending IFO this weekend with my buddies 700+ hp rsx and get some shots for ya guys.
Cool glad to hear your feeling a little better and IFO is a good time .I attend it when they are in my area .Sadly the drag racing season is about over here most of the tracks close up in November for the winter now it's time to make changes and get the cars ready for next year .I'm gonna drive my car most of the winter as I don't have any major plans that will take more than a week or two at this point so far at least hahaQuote:
Originally Posted by monjarassi
Yea after this event I'm focusing on my build I been slacking helping others n leaving mine till the end.Quote:
Originally Posted by vdubkilla
Well save the best for last ! When I get into working on my car I don't like any distractions and try to work only on it .Hell I've been known to take three days off work ignore my phone and go from a bare block to a running car lol !
Glad you're ok! STI can be fixed. As for your build, it's difficult to focus solely on one thing. But when you do, it's well worth it and you get insane results. Here's to the future!
Good you're ok, car can be fixed/replaced!
wow never seen such a great build on a ep3!
Taking safety serious this time around bs aside.
For the past 3+ yrs i have been boosting, driving around everywhere w/o a reinforcement bar, how foolish of me.
Thanks to a local that spared me his due to him having a JDM rebar. Now waiting for the new FMIC to arrive this week and mount it!!
http://farm8.staticflickr.com/7307/1...9ac20675_c.jpg
Started trimming to fit the JDM bumper and luckily all went well on the first try.
Any ep3 owners that need help performing this pm me for details.
http://farm6.staticflickr.com/5506/1...4f8bb04a_c.jpg
http://farm6.staticflickr.com/5488/1...981accf3_c.jpg
http://farm4.staticflickr.com/3675/1...e5d62cb0_c.jpg
For all my followers, take a look at our eshop and just simply scroll through, see anything u like, want , or need for your build or project?
Enter "SPOOLBUS" as the promo code at checkout and receive $10 off on all orders over $100!!
http://boostedk20.com/eshop/
So finally the FMIC came through. First off gotta say thanks to 'echo3gulf' for the hook up, and great packaging skills! :thumb:
The fitment is great and nothing else i could ask for, ill let the pics do the talking.
http://farm3.staticflickr.com/2866/1...5e174d2a_c.jpg
http://farm4.staticflickr.com/3784/1...4f6a8593_c.jpg
http://farm8.staticflickr.com/7432/1...e771edf5_c.jpg
http://farm8.staticflickr.com/7438/1...6526d381_c.jpg
http://farm6.staticflickr.com/5484/1...eaa4a1f9_c.jpg
And a sneak peak of what i been doing to the engine bay.
http://farm8.staticflickr.com/7292/1...e93e94b8_c.jpg
http://farm3.staticflickr.com/2846/1...ef094c41_c.jpg
Lookin good man the intercooler and the engine bay
Thanks. That was the final pc i was waiting for
Looking good man- love that FMIC. I just had to cut my USDM rebar to work with a JDM bumper as well- good stuff
yea i seen your pics on that and used it as refernceQuote:
Originally Posted by DiFfYbOoSt
Wooot!Quote:
Originally Posted by monjarassi
its a baby beefy setupQuote:
Originally Posted by BoostedK20