Yeah probably..Quote:
Originally Posted by DiFfYbOoSt
http://i590.photobucket.com/albums/s...ps0238a6eb.jpg
Printable View
Yeah probably..Quote:
Originally Posted by DiFfYbOoSt
http://i590.photobucket.com/albums/s...ps0238a6eb.jpg
Ok good stuff- ill make sure they are recoated. Did the Steig give you any info as to how high their modified blower could be spun safely?Quote:
Originally Posted by wannavtec
Been a while...Couple updates:
Starting the winter project: hoping to push the JRSC to new limits. By spring- id expect it to be one of most powerful m62 powered EP's in the country ;)
Retune apt scheduled for next week: 06 TSX cams installed- no other change to setup. I want to see how much better, if any, the bigger intake cam works in my setup. Then its back under the knife for a couple months. Expect to see a fully ported, cooled, lightened, coated blower with a new pulley setup- aiming for 13-15 psi this time around. A new fuel return setup is also in the works to compensate for the higher boost pressure, as well as testing out e85. I am also considering a custom 3.5in CAI with a dual nozzle setup for the meth injection. Meth, e85, after cooler, snout cooler... Should get interesting ;)
Also sourced a new JDM front end for my Airwalker Japan front lip to change up the look a bit. New pics and vids (hopefully) to follow retune and tear down. Stay tuned.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
thats sounds great new work youll be doing
LMK id theres anything we can help you with from our store
Once i figure out the new rated rpm of the modified blower i might be picking up a merc racing 2.8 or 2.9 pulley from you guys.
Sent from my iPhone using Tapatalk
Ill be glad to take care of you.Quote:
Originally Posted by DiFfYbOoSt
Quick update- got the car retuned at IMW today. Only new additions are the T1R IAT sensor in the manifold, velocity stack, and colder weather. Car performed incredibly- new numbers: 378 whp/ 268tq
Sent from my iPhone using Tapatalk
http://img.tapatalk.com/d/13/12/13/y2y3y4en.jpghttp://img.tapatalk.com/d/13/12/13/guqu4e4e.jpg
Sent from my iPhone using Tapatalk
Nice! How much you make?
s4 IG-petefromthestreets
Cage plus radio member #1
Made 378whp/ 268wtq @ 10psi
http://img.tapatalk.com/d/13/12/13/upepava3.jpg
Sent from my iPhone using Tapatalk
Great power! Did you take any vids?
s4 IG-petefromthestreets
Cage plus radio member #1
Nice!! That's great at just 10psi. Video?
I was trying to load the dyno vid- dont think i can via taptalk. I posted the vid on the ephatch facebook page.
Sent from my iPhone using Tapatalk
Dyno vid is up on the boostedk20 facebook page- enjoy
https://www.facebook.com/groups/3842...3802475741689/
Sent from my iPhone using Tapatalk
Killer man!
Sent from my SCH-I545 using Tapatalk
Nice!!!
Winter tear down begins- stay tuned.
http://img.tapatalk.com/d/14/01/24/jy9u2azy.jpg
http://img.tapatalk.com/d/14/01/24/8ygybehu.jpg
http://img.tapatalk.com/d/14/01/24/3a2y4emu.jpg
http://img.tapatalk.com/d/14/01/24/ty7e7yhu.jpg
All the parts in storage:
http://img.tapatalk.com/d/14/01/24/3urega9e.jpg
And a sneak peak at the new jdm airwalker front end:
http://img.tapatalk.com/d/14/01/24/teryvyse.jpg
I'm loving it!!! Keep us updated man
Deff love that front end. What's the tear down for?
s4 IG-petefromthestreets
Cage plus radio member #1
Thanks guys- tearing it apart to get the blower ported and to add a new fuel return system. Planning on upping the boost significantly and adding e85
Sent from my iPhone using Tapatalk
Wow that's a nice front end.
Damn thats awesome. Going to try for 18psi now? You should make great power. In for more updates over the winter!Quote:
Originally Posted by bluEP3_SC
s4 IG-petefromthestreets
Cage plus radio member #1
Idk about 18psi- thats a bit high for a m62. I think 14-15psi is more reasonable with the new pulley combo i am going to use.
Finished modifying my fuel cage last night for the fuel return- planning on starting the fuel lines today or tomorrow. Pics to follow.
Sent from my iPhone using Tapatalk
Nice! That's still a good amount of boost. :thumb:Quote:
Originally Posted by bluEP3_SC
s4 IG-petefromthestreets
Cage plus radio member #1
Started the fuel system. Just waiting on some more fittings to complete all the lines. Made a bracket for the AEM fpr.
http://img.tapatalk.com/d/14/01/28/4y9yhuva.jpg
Then started a piece of my return line. More to come as parts arrive.
http://img.tapatalk.com/d/14/01/28/y8yzymyj.jpg
http://img.tapatalk.com/d/14/01/28/e6yjaqam.jpg
http://img.tapatalk.com/d/14/01/28/by6yjume.jpg
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Looking good man
s4 IG-petefromthestreets
Cage plus radio member #1
Hell yea looking sharp
Very sharp! Nice, stealth location for the FPR!
Thanks guys- got some more fittings today- hopefully going to get most of the lines done. On another note- the supercharger and inlet were shipped today for porting and modification. Now begins the waiting period. R40 crank pulley and MercRacing 2.8 boost pulley ordered as well.
Sent from my iPhone using Tapatalk
Ever use getfast1.com for fittings? And nice! Who is doing the work? Also what's an R40 crank pulley, OEM Honda pulley?Quote:
Originally Posted by bluEP3_SC
Steigmeier is doing the blower mods- should have it back in 2 weeks. Yes- its an OEM accord crank pulleyQuote:
Originally Posted by Si Speed 317
Sent from my iPhone using Tapatalk
Nice! They do great work from what I've seen. Lots of domestic stuff. See if they'll take any in-action pics!Quote:
Originally Posted by bluEP3_SC
Finished the fuel return today- what a PITA. Pics:
http://img.tapatalk.com/d/14/01/31/ydynahu7.jpg
http://img.tapatalk.com/d/14/01/31/y4aqu6yh.jpg
http://img.tapatalk.com/d/14/01/31/ejeva7um.jpg
http://img.tapatalk.com/d/14/01/31/ejubune5.jpg
http://img.tapatalk.com/d/14/01/31/dy7yranu.jpg
Fuel pump side:
http://img.tapatalk.com/d/14/01/31/hymugu6a.jpg
http://img.tapatalk.com/d/14/01/31/vajagubu.jpg
Under the car:
http://img.tapatalk.com/d/14/01/31/4u6amytu.jpg
Started the gold foil wrap of all the aftercooler parts:
http://img.tapatalk.com/d/14/01/31/he7y9ane.jpg
http://img.tapatalk.com/d/14/01/31/8ejejy4a.jpg
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Nice job!! Looks great. I ran my return the same way man, good work! What fuel filter did you use?
Thanks- its an aeromotive 100 micron mesh filter- suitable for e85 ;)Quote:
Originally Posted by Si Speed 317
Sent from my iPhone using Tapatalk
Ah, nice! I'm running a Gojin filter, I never checked if it was good for e85 or not. What makes them e85-able?
The paper or felt filters will disintegrate from the e85.Quote:
Originally Posted by Si Speed 317
Sent from my iPhone using Tapatalk
Makes sense. Mine definitely has a metal filter. I forgot they use paper or felt!Quote:
Originally Posted by bluEP3_SC
Updated mod list on page 1
Sent from my iPhone using Tapatalk
good stuff.
I need to buy a fuel filter myself, what size are the inlet fittings??