That's great! Side note: I believe Si's are stuck with the only option being the SRT CNC Dual Pump hanger/cage, no?Quote:
Originally Posted by dkpr87
Printable View
That's great! Side note: I believe Si's are stuck with the only option being the SRT CNC Dual Pump hanger/cage, no?Quote:
Originally Posted by dkpr87
I wouldn't know about the new Si's but i have heard of them using the SRT CNC Dual Pump setup, most of the cars at Humble that use dual pump setups or crazy Fuel systems are 91-99 models the newer model clients havent wanted to go "fast" yet LOLQuote:
Originally Posted by BoostedK20
Thats awesome. Post some pics if you can, that interests me lolQuote:
Originally Posted by dkpr87
Is that a PLM turbo manifold?
Will Do!!!!Quote:
Originally Posted by Si Speed 317
Yessir!Quote:
Originally Posted by 1BadK
https://scontent-b-dfw.xx.fbcdn.net/...90022809_n.jpg
Sorry for the crappy Instagram Pic***
Harness and FIC 2150s installed, next Fuel Lines, Dual Pump Kit, and intercooler piping goes back on!
What tb is that??
Looks like a S2Quote:
Originally Posted by monjarassi
s4 IG-petefromthestreets now Free
Yea thought so but was confused with the bdl
Awesome! That rail will definitely hold all that fuel without trouble!Quote:
Originally Posted by dkpr87
Moar pics
Skunk2 90mm ;-)Quote:
Originally Posted by monjarassi
Oh yea!! -10 AN on both ends with a -10 line feeding and a -8 return line :-)Quote:
Originally Posted by Si Speed 317
We're shooting for some 700s so hopefully with all this we'll get there!!!
Holy shit. -10 feeds and an -8an return. Damn!! Are those two separate -10 lines all the way from the tank? Meaning 1 from each pump?
:drooling:
the way it works is the -10 feed line pulls from both pumps at the same time and then it return fuel on the -8 no dual lines required :yay:Quote:
Originally Posted by Si Speed 317
:biggrin:Quote:
Originally Posted by monjarassi
Did you already get your exospeed 3 piece front for the car? Ive been hearing a lot that exospeed is no longer making the fronts, but CMR is making a similar?
Not yet, waiting on my friend to bring it by so i can mock it upQuote:
Originally Posted by boosted_teg
SOOOOO ANXIOUS TO SEE IT ON TOO!!!:FUU:
Had to tap and weld a small fitting to my Magnus for vacuum.... It didn't come with one.... Da fuq...
On a different note, I may be selling my Magnus over the winter and getting a Skunk2 Ultra Series to replace it
Sent from my SAMSUNG-SGH-I717 using Tapatalk
S2....... why??Quote:
Originally Posted by dkpr87
The s2 ultra is a Kinsler copy. Evidently is out preforming everything else out thereQuote:
Originally Posted by monjarassi
s4 IG-petefromthestreets
I like it's design and I've been wanting that one for a minute, but with Ks the manifolds that are proven are the Gato's, GE's, Prayontoo and Magnus so I might step it up to a Gato Center Feed or a Prayontoo Center Feed
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Yea I kinda noticed that LOL it does look a lot like a KinslerQuote:
Originally Posted by Adm_rsx
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Yea I've seen speedfactory runs a s2 ultra on their 7sec civic. That in itself tells the tale. But k's seem to really love the center feeds like you said. Prayoonto has been on a rise since they released theirsQuote:
Originally Posted by dkpr87
s4 IG-petefromthestreets
Yea I think since the K flows so well the center feed is the best choice, so probably one of three options and a 4th as a wild card.Quote:
Originally Posted by Adm_rsx
-Prayontoo
-Gato
-AFI
-Magnus (They're developing a center feed for Ks)
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Yes those center feeds are just so much sexyer and functional
That's a good list to go off ofQuote:
Originally Posted by dkpr87
s4 IG-petefromthestreets
Hell yeeeea they are ;-)Quote:
Originally Posted by monjarassi
Yea I figured it would be a good one to go off of, best ones out thereQuote:
Originally Posted by Adm_rsx
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Well I sat down in front of the car today and compiled a list of what I need to buy and what I need to install on it.
List to finish the Hatchback
Complete K20 Thermostat Housing
K20 Crank Sensor
Turbo Nuts & Bolts
B Series TPS
Vacuum Block
Vacuum Lines and Fittings
Install Fuel System
Relays for the Fuel Pumps
T3 Turbo Gasket
Install Hondata Boost Solenoid
Stock Hood
Install 3pc Front End
-___- I swear it's like it never ends LOL
May I ask why you need to install a B series tips?Quote:
Originally Posted by dkpr87
s4 IG-petefromthestreets
Cage plus radio member #1
With the Skunk2 90mm you can use either or
Gotcha that was going to be my next statement. Marty with the Kraftwerks ek made a short clip of the Ktuned billet TPS on the skunk2 90 mm tb.Quote:
Originally Posted by dkpr87
s4 IG-petefromthestreets
Cage plus radio member #1
Yea I saw that, I'm gonna go with that whenever I swap out the harness over the winter
Nice man. Car is coming along nicely. :thumb:Quote:
Originally Posted by dkpr87
s4 IG-petefromthestreets
Cage plus radio member #1
Thanks man!!! Hope to finish it soon!!!Quote:
Originally Posted by Adm_rsx
Well took the Intercooler, Piping, Intake Manifold, Valve Cover, and Turbo Compressor Cover to do some painting :-)
VC and Intake Manifold will be Wrinkle Black and the rest will be Flat Black
Pics coming soon, hopefully i don't f**k it up LOL
We all know that feeling very well! VHT Wrinkle Black?Quote:
Originally Posted by dkpr87
the hatch is looking great, cant wait to boost my setup. such a inspiration.
Haven't quite picked out the wrinkle black I want to use yet, any pointers lol?Quote:
Originally Posted by BoostedK20
Thanks man!!!! This build has become quite the headache but it'll pay off in the end, hopefully once it's done i'll go and do a nice photoshoot and post it up along with a dyno video and track footage :-)Quote:
Originally Posted by biocrx
Well, I do! VHT wrinkle black works very well. Make sure the parts you're coating are metal. Follow the directions on the can. 1st coat: heavy; horizontally sprayed. 2nd coat: heavy; vertically sprayed. 3rd and final coat: heavy; diagonally. Then, immediately put in the oven for 20 minutes at 200*f. Then let cure somewhere not the inside of your home, itll take 48 hours to properly cure. Now you know my secret. ;)Quote:
Originally Posted by dkpr87
Every time I used it it didn't look good. Because I didn't bake itQuote:
Originally Posted by Si Speed 317
s4 IG-petefromthestreets
Cage plus radio member #1