IMO yous shouldve given these fittings a chance and fix all this for once if you have no cracks on the manifold .
http://farm9.staticflickr.com/8234/8...555b7ba5_c.jpg
http://farm9.staticflickr.com/8228/8...e2128fe1_c.jpg
Printable View
IMO yous shouldve given these fittings a chance and fix all this for once if you have no cracks on the manifold .
http://farm9.staticflickr.com/8234/8...555b7ba5_c.jpg
http://farm9.staticflickr.com/8228/8...e2128fe1_c.jpg
While they look nice, they are NPT and the threads on the tial wastegate are M10x1.0. And how would a crack in the manifold cause me to boost creep? (serious question)Quote:
Originally Posted by monjarassi
Crack in the manifold signifies boost leak, boost leak equals boost creep. Idk doh..
My thought were that boost would leak out enough not to open/flow through the wastegate but the main runners would still flow enough to build boost. I'm no expert and can be totally wrong tho lol. just a thought
A boost leak is the opposite of boost creep. The car has made 20 psi. I really doubt it's doing that with a crack in the manifold.
Alright here are some pictures I took with the wastegate in as it was and a few closeups once I took it out. LMK what you think.
http://i1134.photobucket.com/albums/...ps527bac95.jpg
http://i1134.photobucket.com/albums/...psc5aa7072.jpg
http://i1134.photobucket.com/albums/...ps6e3422fc.jpg
http://i1134.photobucket.com/albums/...ps2c3f3613.jpg
http://i1134.photobucket.com/albums/...psd9956b6b.jpg
Based on these two below it looks like it may be leaking a little. IDK how that would be happening :shrug:
http://i1134.photobucket.com/albums/...psba0ce0a2.jpg
http://i1134.photobucket.com/albums/...ps47f28e9c.jpg
Banjo installed:
http://i1134.photobucket.com/albums/...ps9a3201bf.jpg
Also, I plan to run my wastegate straight to my pressure source for a bit so I need the top half to just vent. Is it a bad idea to put the other banjo fitting in the top port and have nothing connected to it? Would rather not have to pull the gate out again when I get my new boost controller.
when i was on a mbc i left a port open nothing ever happened
Ya I know you can do that. But I want to just leave the banjo fitting in it. I can't imagine it matters if there is a fitting or not. It can still breathe.
youd b fine