Dat Guy with the Base RSX

Quote:

---

Originally Posted by monjarassi

hmmmmm, i dont experince wheel hop in my beast nor my buds 700+rsx, not sure what your intensions might be.

Does that rsx have motor mounts, solid bushings, coil overs the whole 9 yards

---

Idk just trying to see if you actually feel a difference with them because they were night and day on my ek coupe, but idk about solid bushings but it does have solid mounts and Tein SS-P coils :coffeepaper:

and what are your intentions as for mounting them, its hard enough we have that huge ass subframe there already

Quote:

---

Originally Posted by monjarassi

and what are your intentions as for mounting them, its hard enough we have that huge ass subframe there already

---

Basically making the same setup as a normal traction bar setup is constructed but at an angle so that during full lock you dont come into issues with fitment

That's sounds tough getting crammed up in there

a friend of mine has done it. he took them back off as they didn't do anything for the rsx of his. he had the fastest all motor street rsx back in 2007-2009.

Quote:

---

Originally Posted by 02civic629

UPDATE:

Pretty much finished with the front splitter project, just need two brackets welded for final install and I should be good to go, but putting that on hold for now because its gonna be in the way for second project :shady:

Mocking up some traction bars for the RSX chassis....... Not sure how much night and day difference for N/A guys but "theoretically" it should work....... Once fabbed imma test them on a 500+whp RSX to see if they can cut down on some wheel hop or make a difference on a boosted setup :beersmile:

---

I don't have any wheel hop all I have are lowest rated mounts, lca bushings, and coils.

Quote:

---

Originally Posted by monjarassi

That's sounds tough getting crammed up in there

---

Yea well see, if it doesn't work just trash the idea....... Ain't hurting in trying it.

Quote:

---

Originally Posted by PetefromtheStreets

a friend of mine has done it. he took them back off as they didn't do anything for the rsx of his. he had the fastest all motor street rsx back in 2007-2009.

---

Yea I'm pretty confident they wont do much on my car if anything, but hey maybe it might you never know. But then again I have more fun drawing up the stuff and fabbing it ya know. Just to say you did it and tried it is all that matters.

Quote:

---

Originally Posted by 02civic629

Yea well see, if it doesn't work just trash the idea....... Ain't hurting in trying it.



Yea I'm pretty confident they wont do much on my car if anything, but hey maybe it might you never know. But then again I have more fun drawing up the stuff and fabbing it ya know. Just to say you did it and tried it is all that matters.

---

true. but I just don't see the need in our style front suspension. Especially with the spherical LCA bushings

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

Quote:

---

Originally Posted by PetefromtheStreets

true. but I just don't see the need in our style front suspension. Especially with the spherical LCA bushings

sent from my bomb ass Galaxy s5
#doyouevenshiftbro

---

Yea but "theoretically" it should still increase stiffness, maybe not on noticeable difference because of the way our front control arms are setup. But it shouldn't decrease the handling in any way if that makes sense ya know.

I mean your talking to the guy who re-wired his car and deleted the roof lights on the ceiling trying to shave another fucking ounce LMAO :giggle:

EVERY little mod counts :rotfl: :rotfl: