Lol. Can't wait to see that. I like the percision gates now that they include various springs to get to your target without having to buy more springsQuote:
Originally Posted by monjarassi
Printable View
Lol. Can't wait to see that. I like the percision gates now that they include various springs to get to your target without having to buy more springsQuote:
Originally Posted by monjarassi
Should be getting an email soon to send my block out to CNC engine dynamics in VA. Once it's back it's go time for the blower project part 3!
Thats gonna be sick, goodbye sleeper!Quote:
Originally Posted by Adm_rsx
Dopeness! I bet you're lovin it like a mcdonalds kidQuote:
Originally Posted by Adm_rsx
YESSIR! Can't wait just to receive the email confirming progress. LolQuote:
Originally Posted by Si Speed 317
custom bracket for my solenoid to mount on the side of the vc
http://farm9.staticflickr.com/8478/8...4ca0e9ff_z.jpg
^^ nice man. Looks like an aeromotive fpr bracket
Hahahaha sure is.
lmfao!Quote:
Originally Posted by monjarassi
Monjarassi, looks dope! Speaking of which, I need fittings for my aeromotive FPR. All fittings. I'm relying on adm_rsx for this. Lmao. Link away!Quote:
Originally Posted by Adm_rsx
Getfast1.com or come to me sweety!
thanks, cant wait to start my new build thread!!! Im trying to have this new setup done by the end of the yr
Speed the FPR you bought from me is an AEM one.Quote:
Originally Posted by Si Speed 317
Whoops, thats what I get when I post from tapatalk half asleep in bed. Thanks :thumb:Quote:
Originally Posted by aLmk
Sell it and buy an aeromotive. Lol.Quote:
Originally Posted by Si Speed 317
In for the new build!Quote:
Originally Posted by monjarassi
Got a new parts bin to keep the bits and pieces of my motor together while its torn apart.
Attachment 100
Attachment 99
There are various things I threw away while stripping the motor that I'll need before the re-install happens. :facepalm:
That's what I get for being pissed off and working on the car.
http://img.tapatalk.com/d/12/12/05/8umy3aza.jpg
Bisi shows us some support! #BoostedK20
Neatness is good! Atta boy :thumb:Quote:
Originally Posted by Adm_rsx
Yea but I threw away stuff I need to put a k20/24 back in. Lol. This straight k24 is a little different lolQuote:
Originally Posted by Si Speed 317
what would u guys recommend for cutting a hole on my cf hood for the dumptube exit??
I would suggest painters tape and a dremel. Less is more, so make the hole too small rather than too large. And then you can put a trim around the hole if you'd like for a cleaner look.Quote:
Originally Posted by monjarassi
:Yeahthat: best way to do it. Will help with splintering. And of course measure trice, cut once.
Trice for sure. I would rep you, but I have to spread some around first. Damn rep system :pissed:Quote:
Originally Posted by Adm_rsx
Of course :thumb:Quote:
Originally Posted by ksboi
You think theres a need?Quote:
Originally Posted by Adm_rsx
I'll rep a few of your posts also man because you've deff got a lot of informative ones. Tapatalk can't rep so I'll hop on a laptop to do it.Quote:
Originally Posted by Si Speed 317
Thanks :) Much appreciated. I wish tapatalk could rep!Quote:
Originally Posted by Adm_rsx
Man y'all slacking! This DIY/Informative contest needs more people to post. Concept is so simple!
I'm working on my submission. I'm sneaking a paragraph in every now and then when my boss leaves the room. Lol
I know I am offering up free HID Kit for the winner of the contest. Let me know what you need!!!!! I keep finding different parts I can get. If you need nylon braided lines cheaper then anyone even summit racing!!!
Hit the Dyno yesterday and made 462hp/300tq on a Dyno jet
http://m.youtube.com/watch?v=ffdQ1mE-Iwk
Slow
Sounds fucking sick!
Does the boost junkyz ic piping fit with stock battery?
Quick personal question/opinion. Derek said he's willing to work this out but I'm not sure I want to anymore. If I go with him its going to cost me another $2-3k easy to get this going.
But if I don't then I know I have around 2000 dollars that is going to go to waste because no 1 will ever buy is intercooler and piping from me.
Thoughts?!
sent via spazatalk
It's odd he wants to work it out but I'm glad he does. I'd tread carefully. It's all in what you want as an end result. Just my .02Quote:
Originally Posted by Spaz
That's a tough one. Did you get the intercooler from him? If so, tell him you just want your money back. If not, I would have a hard time trusting him to get the job done.Quote:
Originally Posted by Spaz
Sent using my Galaxy S3
I think I'm just gonna eat the $1700 for the intercooler and piping and sell what I have. In parts alone (not including new fab costs) I'm looking around $3600... fuck that
sent via spazatalk
fuck him. You do you zack
:yeahthat: I showed a few people that dyno because it sounded so good! And they were customers at work :D :beer:Quote:
Quote:
Originally Posted by My07si
Quote:
Originally Posted by aLmk
+1 on this. The money aspect blows. But you're so close..Quote:
Originally Posted by Adm_rsx
Why would no one want his intercooler and piping?