Nice updates man, I like the work you do and your mindset for all this stuff. Good stuff, definitely MOD material!
Printable View
Nice updates man, I like the work you do and your mindset for all this stuff. Good stuff, definitely MOD material!
Thanks man. I appreciate that! It's not the cleanest out there but I've done my best so it counts for something. LolQuote:
Originally Posted by Spoolin_VTEC
s4 IG-petefromthestreets
Cage plus radio member #1
Started the printer up with building my relay cover. It's a 22hr build so I'll post a completed picture in raw form tomorrow around noon. Until then I'll post updates with how the builds progressing to show the steps. Basically just wanna show off the printer and technology for those unaware.
Video of the printer in action.
https://www.dropbox.com/s/rrvmj5ha9p...115_130027.mp4
s4 IG-petefromthestreets
Cage plus radio member #1
A little under 3hrs into the build http://img.tapatalk.com/d/14/01/16/u9y5u8ej.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
Sick
Box update!
20hrs in. Box is building it's final layers now.Quote:
Originally Posted by Si Speed 317
http://img.tapatalk.com/d/14/01/16/ytyzy9ym.jpghttp://img.tapatalk.com/d/14/01/16/uza5u7yp.jpg
https://www.dropbox.com/s/22vwhjh9ki...116_100727.mp4
s4 IG-petefromthestreets
Cage plus radio member #1
The level of awesomeness.... is OVER 9,000!!!
Hahaha. Thanks. You should see the statue they built of their grandson. It's awesome. http://img.tapatalk.com/d/14/01/16/umejynuz.jpgQuote:
Originally Posted by Si Speed 317
s4 IG-petefromthestreets
Cage plus radio member #1
Thats awesome!! Not a custom box for relays in a race car though. Make a bobblehead of Aidan, and then mount it on your dash.
Funny thing is I'm actually going to make a statue of him. Lol not a bobble head but a statue nonetheless. Lol
s4 IG-petefromthestreets
Cage plus radio member #1
Box is done just have to clean up the support structure and seal then plate.
http://img.tapatalk.com/d/14/01/17/e9u6ybe7.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
I'll take oneQuote:
Originally Posted by PetefromtheStreets
Fuel system king crew member #1
Box?Quote:
Originally Posted by Bottled Morphine
s4 IG-petefromthestreets
Cage plus radio member #1
Printer
Fuel system king crew member #1
:)
Fuel system king crew member #1
me too!Quote:
Originally Posted by Bottled Morphine
You can make your PFTS gears with that printer and mass produce them
Consider it done.Quote:
Originally Posted by Frostydc5
s4 IG-petefromthestreets
Cage plus radio member #1
Came out AWESOME!
PPG's came in fellas. SUPER excited about them!!! Waiting on the diff then gotta order some bearings. http://img.tapatalk.com/d/14/01/18/gegysyna.jpghttp://img.tapatalk.com/d/14/01/18/esyqy4ep.jpghttp://img.tapatalk.com/d/14/01/18/vyjy3ere.jpghttp://img.tapatalk.com/d/14/01/18/7eda7ysa.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
VFC!!!!! :-) now, if you can make life sized models of some dimes, I'd bet you turn the porn industry on its ears.
Kidding.
Seriously though, on another note, these 3D printers are also simulating food. Gonna be like the Jetson's pretty soon.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
That looks nice! Time for some whining!
Yea the 3d printing technology is getting insane. It's awesome!Quote:
Originally Posted by SAX JONZ
Haha thanks man. I'm ready for some whining!Quote:
Originally Posted by aLmk
s4 IG-petefromthestreets
Cage plus radio member #1
Yeah, those GEARS TOO!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Did you get a timing chain tensioner also?
Yea I bought a hybrid racing timing chain tensionerQuote:
Originally Posted by ksboi
Hahaha you know it! You next up to the plate for a set?Quote:
Originally Posted by SAX JONZ
s4 IG-petefromthestreets
Cage plus radio member #1
Box v2.0 cane out great. http://img.tapatalk.com/d/14/01/20/4a6ety3a.jpg
s4 IG-petefromthestreets
Cage plus radio member #1
Yes!!
It's going to get Ni plated then a black patina. Then highlight the lettering with brushed Ni.Quote:
Originally Posted by Si Speed 317
s4 IG-petefromthestreets
Cage plus radio member #1
Looks awesome!! I want one!Quote:
Originally Posted by PetefromtheStreets
Tits.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
You want a box?Quote:
Originally Posted by ryaano18
s4 IG-petefromthestreets
Cage plus radio member #1
Yup! I have a relay panel behind the front bumper that could use a cover :)Quote:
Originally Posted by PetefromtheStreets
What size?Quote:
Originally Posted by ryaano18
s4 IG-petefromthestreets
Cage plus radio member #1
Have to get back to you with that. 2 relays and 2 fuse holders, may add another 2 relays there but I need to do a major rewire before I find out for sureQuote:
Originally Posted by PetefromtheStreets
Right now my build limits are 5x5x5 inches. So I could make 2 with tabs in different spots even remove the wall between the 2 so they join together like a puzzle.Quote:
Originally Posted by ryaano18
s4 IG-petefromthestreets
Cage plus radio member #1
Gotcha, well as soon as I start the process I'll get with you :) and can I design my own box as long as it's within 5x5x5 limits?Quote:
Originally Posted by PetefromtheStreets
Yea.Quote:
Originally Posted by ryaano18
s4 IG-petefromthestreets
Cage plus radio member #1
That's badass. The crew should boxes son
Fuel system king crew member #1