monjarassi
11-26-2013, 10:09 PM
Okay so i once was in the web searching how to hook up my 3 port and so forth, so here we go for future use!!
3 port solenoid
http://www.d-series.org/forums/attachments/engine-management/27801d1306068521-hondata-boost-control-solenoid-configuration-wategateinstall.jpg
As for the wiring one wire goes to ign switch 12v and the other to ecu.
4 port solenoid
http://pics.fullavit.com/4port/diagram.png
Wiring same as above.
And also if turbo doesnt have a vacuum fitting, then you will have to get a source off the Intake manifold to supply the vacuum to the solenoid.
And as a added bonus ill throw in MBC diagram for internally gated and external gates
http://www.turbosmartusa.com/wp-content/uploads/2011/10/5483.jpeg
http://www.turbosmartusa.com/wp-content/uploads/2012/07/article_bthookup1.png
Happy Boosting!! :beer:
3 port solenoid
http://www.d-series.org/forums/attachments/engine-management/27801d1306068521-hondata-boost-control-solenoid-configuration-wategateinstall.jpg
As for the wiring one wire goes to ign switch 12v and the other to ecu.
4 port solenoid
http://pics.fullavit.com/4port/diagram.png
Wiring same as above.
And also if turbo doesnt have a vacuum fitting, then you will have to get a source off the Intake manifold to supply the vacuum to the solenoid.
And as a added bonus ill throw in MBC diagram for internally gated and external gates
http://www.turbosmartusa.com/wp-content/uploads/2011/10/5483.jpeg
http://www.turbosmartusa.com/wp-content/uploads/2012/07/article_bthookup1.png
Happy Boosting!! :beer: