PDA

View Full Version : Transmission Group Buy: PPG



BoostedK20
10-29-2013, 05:40 PM
This is how we'd like to kick off the grand opening of the BoostedK20 eShop: We're having a pre-sale group buy for one of, if not, the best performance transmission products for the K-series transmissions - PPG!

Who is PPG: PPG, aka Pfitzner Performance Gearboxes, is an Australian-owned company with an international success story of producing high-quality gear sets for use in race, rally, and street to set global standards. Utilizing state-of-the-art production facilities equipped with the latest available technology, Pfitzner has the ability to produce its distinctive tooth profiles. Pfitzner products have gained a reputation, both internationally & domestically as tough, reliable, and near-unbreakable units. Pfitzner's sole purpose is to produce the absolute best product and aim to exceed customer expectations, without being hindered by assumed limitations.

PPG philosophy: When you are involved in motor sport, you want to know that replacement parts for your race car or team are only as far away as the nearest phone and that includes gear sets. PPG produces reliable, high-performance, tough gearboxes for the Motorsport arena - consistently coping with big horsepower, hard driving and extreme loads. They have a large range of product in stock to support race and rally clients. There is zero lead time on a considerable amount of their product list because... it’s on the shelf.

A huge benefit of PPG Gears are that they are machined out of solid billet, not welded together like others.
_________________________________
Official Group Buy Details:
The BoostedK20.com eShop will have all K-series transmission components we carry available at a discount. Here's how the discount process works: Each item listed below will begin with a 5% discount standard, for up to two (2) people. For every person after, the discount will increase by 1% (with a maximum of 15% total). So, if the 1st-2nd Straight Cut Dog Set has 4 people, each person will receive a 7% discount off MSRP. If 12 people, each person for that item will save 15%.

Please understand: MSRP prices for PPG products WILL change everywhere as of January 1st, 2014. The prices are based off the exchange rate from AUD to USD, and are listed in quarterly increments (applicable for 3 months at a time, then prices are checked and changed again by PPG). As of right now (Dec 7, 2013), the value of the dollar has decreased since the beginning of this quarter (October), which likely means an increased price in the new year. This is out of our control, and will be applicable wherever PPG gears are sold, whether listed or not.


1st-2nd Straight Cut Dog Set
Options: 2.615/1.611 or 2.83/1.93

MSRP: $2,803.30
Your Price: 5-12% off
You Save: $????


3rd-4th Straight Cut Dog Set
Options: 1.150/0.909 or 1.5/1.2

MSRP: $2,526.85
Your Price: 5-12% off
You Save: $????


1st-4th Straight Cut Dog Set
Options: 2.615/1.938/1.500/1.200 or 2.615/1.611/1.150/0.909 or 2.83/1.93/1.50/1.15 or 2.83/1.93/1.50/1.20

MSRP: $5,296.20
Your Price: 5-12% off
You Save: $????


1st-4th Drag 5th Brace Assembly

MSRP: $790.55
Your Price: 5-12% off
You Save: $????


Final Drive
Options: 4.769 & 5.833

MSRP: $1,935.15
Your Price: 5-12% off
You Save: $????


Straight Cut 1-2 Synchro Set
Option: 2.615/1.666

MSRP: $2,037.00
Your Price: 5-12% off
You Save: $????


Straight Cut 3-4 Synchro Set
Option: 1.150/0.909

MSRP: $1,886.65
Your Price: 5-12% off
You Save: $????


Straight Cut 1-4 Synchro Set
Option: 2.615/1.666/1.150/0.909

MSRP: $3,923.65
Your Price: 5-12% off
You Save: $????


Helical Cut 1-2 Synchro Set
Option: 2.75/1.93

MSRP: $2,037.00
Your Price: 5-12% off
You Save: $????


Helical Cut 3-4 Synchro Set
Option: 1.40/1.05

MSRP: $1,886.65
Your Price: 5-12% off
You Save: $????


Helical Cut 1-4 Synchro Set
Option: 2.75/1.93/1.40/1.05

MSRP: $3,923.65
Your Price: 5-12% off
You Save: $????





Pre-Sale List
1. 1/2 straight cut dog engagement (2.6/1.6) - PetefromtheStreets
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.




Please post up with the product you would like and the quantity.
Example: 1st-4th Straight Cut Dog Set, Ratio: 2.615/1.611/1.150/0.909; x1.


SEE OUR PPG PRODUCTS HERE: http://boostedk20.com/eshop/?product_cat=gears

Frostydc5
10-29-2013, 06:03 PM
If only money grew on trees

monjarassi
10-29-2013, 06:19 PM
If only money grew on trees

x2!!!!

aLmk
10-29-2013, 06:31 PM
Damn I'd really love a PPG helical 1-4, too bad that is way out of the budget at this point in time.

1JZ_Type-S
10-29-2013, 06:34 PM
x2!!!!

x3!!! I REALLY need these, but the american education system is a proficient succubus

vdubkilla
10-29-2013, 08:32 PM
I wish I could afford these but also not in the budget right now :(

BoostedK20
10-29-2013, 10:18 PM
If only money grew on trees

x2!!!!
They're expensive, but they're the cream of the crop. And have a lifetime warranty.


Damn I'd really love a PPG helical 1-4, too bad that is way out of the budget at this point in time.
I suggest a 3/4 to start you off. Cheaper of the 1-2/3-4 and are available at a discount - which never happens.

x3!!! I REALLY need these, but the american education system is a proficient succubus
I've heard that quite a few times. ;)

I wish I could afford these but also not in the budget right now :(

Understandable. We will always do the best we can by you all.

aLmk
10-29-2013, 10:34 PM
They're expensive, but they're the cream of the crop. And have a lifetime warranty.


I suggest a 3/4 to start you off. Cheaper of the 1-2/3-4 and are available at a discount - which never happens.

I've heard that quite a few times. ;)


Understandable. We will always do the best we can by you all.
Unfortunately, even that is out of the budget right now, gotta get my motor built, and I have a set of stock gears that were treated, so I will use those once this trans goes.

BoostedK20
10-29-2013, 10:42 PM
Unfortunately, even that is out of the budget right now, gotta get my motor built, and I have a set of stock gears that were treated, so I will use those once this trans goes.
That will definitely hold you over for the inevitable. Best of luck with it all, make sure you update us in your build thread!


As a side note to all of you, paypal does have 'Bill Me Later' as an option. There is, IIRC, no interest for 6 months, and it saves you money upfront for using their 'bill me later' option. Not that I suggest going on a payment plan, but these gears won't likely be on sale in the future at the same price.

SAX JONZ
11-11-2013, 02:38 PM
I'm in for a set as soon as mine shits the bed. What's good for the street and track? I am rotrexed and at the moment pushing close to 400hp looking to get as close to max hp as possible. I guess the kit is rated to 650hp. I want to keep the DD status and have a bulletproof trans. Helical? Hope that helps

BoostedK20
11-11-2013, 08:54 PM
I'm in for a set as soon as mine shits the bed. What's good for the street and track? I am rotrexed and at the moment pushing close to 400hp looking to get as close to max hp as possible. I guess the kit is rated to 650hp. I want to keep the DD status and have a bulletproof trans. Helical? Hope that helps

Depends on your goals. Most people get gears once. You have the option for a 1-2, 3-4, or 1-4 dog box. Adm_rsx Spaz

Spaz
11-11-2013, 08:58 PM
Helical will definitely be a better route if you want to DD still. Drove straight cut in the streets and it drives people nuts.

Sent from my SCH-I545 using Tapatalk

SAX JONZ
11-12-2013, 01:51 AM
Yeah, understand it whines from what I've heard. Thanks.

Spaz
11-12-2013, 08:25 AM
I whines yes but also notchy to shift being straight cut. Clunk clunk bang lol

Sent from my SCH-I545 using Tapatalk

SAX JONZ
11-12-2013, 12:02 PM
Oh yeah. Heard that from Jason. You know you're up against impossible odds when you hear first engage. 8-D

aLmk
11-12-2013, 09:12 PM
Imagine what reverse sounds like. It will sound like that ALL THE TIME. Not for me lol. Perfect for a race car though.

monjarassi
11-12-2013, 10:39 PM
My buddies RSX has the gearset 1-4th and O GOD, i love driving his car, luckily him and i share the project

BoostedK20
11-13-2013, 01:17 AM
Imagine what reverse sounds like. It will sound like that ALL THE TIME. Not for me lol. Perfect for a race car though.

Racecar you say?

:yay:

PetefromtheStreets
12-02-2013, 05:47 PM
You can get straight cuts and then not clunk around. Just get the synchro set.

s4 IG-petefromthestreets
Cage plus radio member #1

PetefromtheStreets
12-10-2013, 03:15 AM
Sign me up for...

1/2 straight cut dog engagement (2.6/1.6)

s4 IG-petefromthestreets
Cage plus radio member #1

BoostedK20
12-22-2013, 01:35 PM
BUMPercars

jendry20
04-05-2014, 06:49 AM
Im down for a set 1-4 helical