*CHAT* Adios Summer, Winters Here: The Next Episode

[monjarassi]

I need something to do from the end of jan to early march as I am off from work for about 6 weeks so I mess with the car usually stay up all hours of the night and sleep a lot lol

that sound similar to me in march only!!!

[vdubkilla]

It really depends on the weather if it stays warm I work thru the winter but it's almost always to cold for about 6 weeks what kinda work do ya do ?

[monjarassi]

It really depends on the weather if it stays warm I work thru the winter but it's almost always to cold for about 6 weeks what kinda work do ya do ?

What you mean work as in employment??

[vdubkilla]

What you mean work as in employment??

yeah was just wonderin

[monjarassi]

O im a General Manager at a whse supplying AMAZON,com

[vdubkilla]

O im a General Manager at a whse supplying AMAZON,com

Oh cool I fix boats / outboard motors

[monjarassi]

Oh cool I fix boats / outboard motors

nice!! u like that

[monjarassi]

:wtf:

http://i41.photobucket.com/albums/e289/rickoner/bayclose.jpg

[vdubkilla]

nice!! u like that

Yes I enjoy it as it's interesting to say the least and I do mobile service so it's not at all boring like being stuck at a shop all day


:wtf:

http://i41.photobucket.com/albums/e289/rickoner/bayclose.jpg


lol looks like a home made intake to me sure seems odd seeing the tb mounted on that side too

[BoostedK20]

so anyone have any crazy winter plans?

I do! However, in order for me to move forward with the new drag car build, I need you all to help me think of a Projekt name!

Then we can go into motor chatter and you can all help me find great parts and deals on a used k-series setup ;)

[monjarassi]

O that's rite we need to come up with a name.

[aLmk]

Yes I enjoy it as it's interesting to say the least and I do mobile service so it's not at all boring like being stuck at a shop all day




lol looks like a home made intake to me sure seems odd seeing the tb mounted on that side too
Wow didn't even notice that at first look, that is odd that they have the TB over there! I wonder why? I also noticed there is no charge pipe connected to the turbo.

[ryaano18]

I do! However, in order for me to move forward with the new drag car build, I need you all to help me think of a Projekt name!

how about Projekt Cryptic

[BoostedK20]

Wow didn't even notice that at first look, that is odd that they have the TB over there! I wonder why? I also noticed there is no charge pipe connected to the turbo.
I assume because a dual-sided intercooler can be a PITA on K-series setups since the turbo and throttle body are usually on the same side, thus the reason for single-sided intercoolers. So, in an effort to have minimal plumping (and likely unable or chose not to use a center-feed intake manifold), that peraon decided to do a reverse-feed intake manifold. Smart idea IMO

O that's rite we need to come up with a name.
Yes we do!

how about Projekt Cryptic
Not bad!

[ksboi]

Made it all the way here.

[vdubkilla]

Made it all the way here.

Good to hear it man so are we still gonna see you on the forum ?

[BoostedK20]

Made it all the way here.

God bless. Keep us updated. Don't go soft and disappear on us, Brothers.

[ryaano18]

Good morning gentlemen!

[Si Speed 317]

Goodmorning everyone!

[bulliedog]

Whats good fellas!

[ryaano18]

anyone here recommend a good engine builder? At the moment probably going with Jeff at Evans tuning, good prices and reputable work, but anyone else have better experience elsewhere?

[bulliedog]

anyone here recommend a good engine builder? At the moment probably going with Jeff at Evans tuning, good prices and reputable work, but anyone else have better experience elsewhere?

You have them, ERL and Laskey Racing also.

[Si Speed 317]

civicgrl89 has a good suggestion

[ryaano18]

hmm i need to check out laskey racing, havent heard of them before

[ksboi]

My ride to camp

[monjarassi]

Man american car grind my gears!!! I hate domestic cars!!!

Im currently driving a chrysler 200 2012 or so and the dam thing is a POS.
Driver seat belt doesnt retract after released from buckle. How freaking safe is that.
Audio controls are behind the steering wheel, WTF!!!
And to top it off its just a junk of a car, nothing in comparison to an foreign car. Wll call enterprise tomorrow and bitch them out i cant drive that shit, i dont feel safe at all

[PetefromtheStreets]

I'mmmm baaaaaackk!!!

[monjarassi]

WELCOME back.

MESICO hugh... Nice.

[PetefromtheStreets]

anyone here recommend a good engine builder? At the moment probably going with Jeff at Evans tuning, good prices and reputable work, but anyone else have better experience elsewhere?

Treblictuned in VA. he's on my ig and Facebook.

s4 IG-petefromthestreets
Cage plus radio member #1

[PetefromtheStreets]

WELCOME back.

MESICO hugh... Nice.

Thanks and Yea man.. My cousin has a destination wedding. It rained 3 days we were there Lol but the wedding day was by far the nicest weather we could have asked for.

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

What part of Mexico were u in

[PetefromtheStreets]

Cancun. At Dreams Rivera Resort.

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

Ahhh nice. My father is from mexico n he visits yearly. Never been there myself personally.

One day doh

[PetefromtheStreets]

Ahhh nice. My father is from mexico n he visits yearly. Never been there myself personally.

One day doh

What part is your father from? I meant and talked with several employees, and Their stories were very sad.

s4 IG-petefromthestreets
Cage plus radio member #1

[Si Speed 317]

Any pics from mehico?! Ive never been there

[PetefromtheStreets]

Any pics from mehico?! Ive never been there

Yea I have some I'll post but won't be able to until after work. I already unloaded them off my phone to my laptop.

s4 IG-petefromthestreets
Cage plus radio member #1

[aLmk]

http://youtu.be/BWAK0J8Uhzk

[ryaano18]

What part is your father from? I meant and talked with several employees, and Their stories were very sad.

s4 IG-petefromthestreets
Cage plus radio member #1

unfortunately that's all you hear about the people from mexico, the sad stories :(

[PetefromtheStreets]

http://youtu.be/BWAK0J8Uhzk

That's pretty Damn cool.

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

http://www.speedhunters.com/2013/11/...24-turbo-dc5r/

http://i726.photobucket.com/albums/ww265/loob16/JDMYARD_DC5R_1604_zpsec8cf863.jpg

http://i726.photobucket.com/albums/ww265/loob16/JDMYARD_DC5R_1395-800x533_zpsab5e6469.jpg

[Bottled Morphine]

http://www.speedhunters.com/2013/11/...24-turbo-dc5r/

http://i726.photobucket.com/albums/ww265/loob16/JDMYARD_DC5R_1604_zpsec8cf863.jpg

http://i726.photobucket.com/albums/ww265/loob16/JDMYARD_DC5R_1395-800x533_zpsab5e6469.jpg

I love that car!

Fuel system king crew member #1

[monjarassi]

Yea that car is sick. Everything is just perfect.

[Spaz]

As sick as it is I will never be a fan of the mugen front bumper lol but god damn that car is so well built

Sent from my SCH-I545 using Tapatalk

[monjarassi]

I'm pretty sure that bumper is seving its function, not like half those hellagay rsxs on crsx that have them for show and don't pull it off well at. all.

[Spaz]

I really want a wide body set up

Sent from my SCH-I545 using Tapatalk

[PetefromtheStreets]

I'm pretty sure that bumper is seving its function, not like half those hellagay rsxs on crsx that have them for show and don't pull it off well at. all.

Glad I'm not the only one who doesn't like that look. Most people drool over it

s4 IG-petefromthestreets
Cage plus radio member #1

[Spaz]

I think it's ugly as hell

Sent from my SCH-I545 using Tapatalk

[Bottled Morphine]

I think it's ugly as hell

Sent from my SCH-I545 using Tapatalk

Lol really? True the bumper doesn't do it for me, but the rest looks pretty sick to me.

Fuel system king crew member #1

[Spaz]

I love the rest... just that ugly bass mouth

Sent from my SCH-I545 using Tapatalk

[PetefromtheStreets]

I like the wing setup. How it distributes the pressure vs all on the trunk lid.

s4 IG-petefromthestreets
Cage plus radio member #1

[aLmk]

I agree, the front end looks hideous.

[Si Speed 317]

Anyone like the new CTR?

[ryaano18]

Anyone like the new CTR?

yes and no. Looks like a more aggressive ford fiesta but i do really like the interior

[Spaz]

I want the euro ctr. Turbo hatch. I love that hatch back.. others don't but I do

Sent from my SCH-I545 using Tapatalk

[aLmk]

Anyone like the new CTR?
I think it looks pretty good, I'd love to drive one/see one in person. The turbo vtec seems promising, especially if the motor is anything like our k20s :)

[ksboi]

http://m.cbsnews.com/storysynopsis.rbml?pageType=world&url=http://www.cbsnews.com/8301-202_162-57613092/suicide-bomber-kills-10-egypt-troops-in-latest-attack-to-hit-volatile-sinai-peninsula/&catid=57613092

Stuff got real

[PetefromtheStreets]

http://img.tapatalk.com/d/13/11/22/u9y9e6yg.jpg

Much needed. But why are my pics getting turned sideways?

s4 IG-petefromthestreets
Cage plus radio member #1

[Si Speed 317]

http://img.tapatalk.com/d/13/11/22/u9y9e6yg.jpg

Much needed. But why are my pics getting turned sideways?

s4 IG-petefromthestreets
Cage plus radio member #1

Idk, happens once in a while to me too. #S4problems #moreliketapatalkproblems #ilovebadbitchesdatsmyfknproblem

Hashtag type of morning.

[vdubkilla]

Evening anybody awake ?

[PetefromtheStreets]

Evening anybody awake ?

Me. Driving down 70

s4 IG-petefromthestreets
Cage plus radio member #1

[Bottled Morphine]

Evening anybody awake ?

Yeah man, sadly

Fuel system king crew member #1

[vdubkilla]

LOL cold out isnt it man .I just got in from doin a data log on 20 lbs is crazy in the cold air .I've been busy as hell lately How have ya been and hows the car coming along ?

[vdubkilla]

Me. Driving down 70

s4 IG-petefromthestreets
Cage plus radio member #1


Whats up Adam I didnt see your post at first hows it goin man

[PetefromtheStreets]

http://img.tapatalk.com/d/13/11/24/etysema2.jpg

30 out burrrrr like gucci mane

s4 IG-petefromthestreets
Cage plus radio member #1

[PetefromtheStreets]

Whats up Adam I didnt see your post at first hows it goin man

Going good man. Waiting on some money to buy aLmk 5speed to start my trans build

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Feels like 15 out there with the wind .I don't like the cold weather tomorrow is gonna be chilly riding the quad :( but I'm riding anyway .

[Bottled Morphine]

LOL cold out isnt it man .I just got in from doin a data log on 20 lbs is crazy in the cold air .I've been busy as hell lately How have ya been and hows the car coming along ?

It's coming along, owner is on vacation, he'll resume work this coming week. All that's left is piping, some wiring and routing fuel lines.
http://img.tapatalk.com/d/13/11/24/ynanu8aq.jpg

And ignore those ratchet ass headlights, got a fresh pair sitting in a pile somewhere.

Fuel system king crew member #1

[vdubkilla]

Going good man. Waiting on some money to buy aLmk 5speed to start my trans build

s4 IG-petefromthestreets
Cage plus radio member #1

I'm have been searching for an issue with my hatch right now .I think I am hitting boost cut cause of the cold weather .I did however find out that one of my bosch 044s was not getting power due to a bad relay .I fixed that I wonder how long it's been that way ? thankfully it didn't hurt anything but the car is boost cutting in 4th I think looking at logs now .

[vdubkilla]

It's coming along, owner is on vacation, he'll resume work this coming week. All that's left is piping, some wiring and routing fuel lines.
http://img.tapatalk.com/d/13/11/24/ynanu8aq.jpg

And ignore those ratchet ass headlights, got a fresh pair sitting in a pile somewhere.



Fuel system king crew member #1


Looking good man .Haha the lights do look a lil dull

[Bottled Morphine]

Yeah, I think I lost my fresh ones :\...luckily they're cheap, probably find em if I order some again.


Fuel system king crew member #1

[PetefromtheStreets]

I'm have been searching for an issue with my hatch right now .I think I am hitting boost cut cause of the cold weather .I did however find out that one of my bosch 044s was not getting power due to a bad relay .I fixed that I wonder how long it's been that way ? thankfully it didn't hurt anything but the car is boost cutting in 4th I think looking at logs now .

Geez glad you found out about the fuel pump. And that's a mystery about turbo cars. The cold and to have a play in boost cut

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Yeah, I think I lost my fresh ones :\...luckily they're cheap, probably find em if I order some again.


Fuel system king crew member #1

If not you can get one of those kits to restore them hell I have just used Mequiars plastic cleaner than Mequiars plastic polish and it works pretty well for dull lights .

[vdubkilla]

Geez glad you found out about the fuel pump. And that's a mystery about turbo cars. The cold and to have a play in boost cut

s4 IG-petefromthestreets
Cage plus radio member #1

I'm seeing 20.9 lbs of boost in the log and cut is set at 21 lbs I'd say it's boost cutting

[PetefromtheStreets]

I'm seeing 20.9 lbs of boost in the log and cut is set at 21 lbs I'd say it's boost cutting

Yup yup. What is your cam angle at around when it cuts. May be completely irrelevant but just curious

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Yup yup. What is your cam angle at around when it cuts. May be completely irrelevant but just curious

s4 IG-petefromthestreets
Cage plus radio member #1

It's at 39

[PetefromtheStreets]

Hmm. Just more dense air right now?

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Hmm. Just more dense air right now?

s4 IG-petefromthestreets
Cage plus radio member #1

I am guessing so but I'm gonna fool with it on Monday again as I'm off work and hope to get it straightened out .I need to make a boost leak tester too so I can check for any boost leaks so a trip to Lowes is at hand .Gonna make the kind ya put on the turbo inlet with an air chuck like on an air tool and then you pressurize the system with a regulator inline .I should have already made one by now .I have seen one at IMW and a friend has one and when we used the one at IMW we quickly found a few boost leaks with it and I think it's something that should be checked often .

[PetefromtheStreets]

Definitely should be checked often. And I know exactitude what your taking about. We made one for a friend's srt4 a couple years ago. Worked like a charm.

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Maybe I 'll post a DIY on how to make one after I make it .

[PetefromtheStreets]

Maybe I 'll post a DIY on how to make one after I make it .

That would be a good idea. :thumb:

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Seems like a good idea for a thread I'll see what I can do ! and I'm out for the night have a good night Adam

[PetefromtheStreets]

I was about to say the Same. Have a good night mark.

s4 IG-petefromthestreets
Cage plus radio member #1

[Spaz]

Killer setup

Sent from my SCH-I545 using Tapatalk

[Bottled Morphine]

Killer setup

Sent from my SCH-I545 using Tapatalk

Appreciate that man, I'm confident it'll put out some nice numbers.

Fuel system king crew member #1

[PetefromtheStreets]

Appreciate that man, I'm confident it'll put out some nice numbers.

Fuel system king crew member #1

TRUUUUU

s4 IG-petefromthestreets
Cage plus radio member #1

[Bottled Morphine]

TRUUUUU

s4 IG-petefromthestreets
Cage plus radio member #1

Still waiting on the word from the shop man, Alex is still down to help me out though, so that's a positive.

Fuel system king crew member #1

[aLmk]

I'm have been searching for an issue with my hatch right now .I think I am hitting boost cut cause of the cold weather .I did however find out that one of my bosch 044s was not getting power due to a bad relay .I fixed that I wonder how long it's been that way ? thankfully it didn't hurt anything but the car is boost cutting in 4th I think looking at logs now .
If it is hitting boost cut, your injector duty cycle will go to 0 right when it cuts, that's how the cut is done, so look for that in the log. For me using flashpro, boost cut usually is 'slow' to respond in that if the cut is set at 18 psi it will take like 18.5 psi or so to trip it, like it can't keep up completely. IDK if this happens to other people too, but my rev limit doesn't keep up either, like if I do a log for Vit to fuel cut, it will usually get almost as high as 8700 rpm before the fuel cut kicks in. I guess it wasn't designed for the revs to climb as quickly as they do with a turbo :shrug:

I am guessing so but I'm gonna fool with it on Monday again as I'm off work and hope to get it straightened out .I need to make a boost leak tester too so I can check for any boost leaks so a trip to Lowes is at hand .Gonna make the kind ya put on the turbo inlet with an air chuck like on an air tool and then you pressurize the system with a regulator inline .I should have already made one by now .I have seen one at IMW and a friend has one and when we used the one at IMW we quickly found a few boost leaks with it and I think it's something that should be checked often .
If you guys have the same tables as we do, you can play with your temperature compensation table for boost control, like remove a a couple duty cycle values in the lower temperatures, the table in flashpro works via IAT sensor.

Also lmk what you get to do the boost leak tester, I tried to make one once and it didn't work out as well as I was hoping. I couldn't get a tight seal on the turbo inlet, because the pvc rubber cap I got for 4'' pipes is larger than the turbo 4'' inlet because a pvc pipe is thicker than the turbo inlet metal. Also my turbo has like a hole in its inlet, kind of like exhaust tips have holes for water drainage, but IDK why it's on my turbo.

[monjarassi]

http://www.k20a.org/forum/attachment.php?attachmentid=37266&d=1379592425

[vdubkilla]

Well I made the boost leak tester I used all 3" stuff and it fits inside the 4" coupler I have on the front of my turbo perfectly .I will post a few pics shortly .I found 2 leaks right away .

http://i540.photobucket.com/albums/gg360/nextproject97/boostleaktester_zpsf5d77635.jpg

http://i540.photobucket.com/albums/gg360/nextproject97/leaktesterforturbo_zps63eb1d9e.jpg

[monjarassi]

I'd greatly appreciate if you make a thread on this so we can have this archived

[vdubkilla]

I'd greatly appreciate if you make a thread on this so we can have this archived

The only problem is I forgot to take pics of the individual items prior to gluing them together so that's why I didn't make a thread

[monjarassi]

The only problem is I forgot to take pics of the individual items prior to gluing them together so that's why I didn't make a thread


simple fix, un do the work and catalog it while you put it back together

[Si Speed 317]

Or tell us step by step and put arrows in the pic, if that would work. Id like to know it!

[vdubkilla]

simple fix, un do the work and catalog it while you put it back together

lol well the (2) 3 " pieces are glued together with pvc glue .I did say I would make a thread so I may go buy all the stuff again and make the thread like I said I would it wasn't much to make it and some of the stuff I already had here to make it .

[monjarassi]

Or tell us step by step and put arrows in the pic, if that would work. Id like to know it!

x222

[1SLOWFG2]

http://img.tapatalk.com/d/13/11/25/7esyme2u.jpg
http://img.tapatalk.com/d/13/11/25/ru6e3usu.jpg
http://img.tapatalk.com/d/13/11/25/2urejy2e.jpg


Oops! This trans took a beating for the last 2 years! So I'm not mad, luckily I can just throw a new 4th gear on there and be all set! But I also have a spare z3 6 speed that I threw back in my car .

[vdubkilla]

Morning !

[ryaano18]

morning morning!

[vdubkilla]

Hey Ryan hows it goin I'm off today just chillin out and it's chilly outside here at a mere 33 degrees

[ryaano18]

I wish i was off, its 40 degrees here and raining. Not the best day

[vdubkilla]

I wish i was off, its 40 degrees here and raining. Not the best day

Hell I might be off most of the week by looking at the forecast it is calling for rain the next 2 days and then it's Thanksgiving on Thursday .I thought it would be warmer if your in Houston.

[ryaano18]

Hell I might be off most of the week by looking at the forecast it is calling for rain the next 2 days and then it's Thanksgiving on Thursday .I thought it would be warmer if your in Houston.

does it snow in your area? and it will probably warm up to 70 degrees next week, the weather here is so bipolar

[vdubkilla]

does it snow in your area? and it will probably warm up to 70 degrees next week, the weather here is so bipolar

Well sometimes it snows but not very often .I'm near the ocean so it often stays rain when storms hit or turns to it and we end up with not much accumulation .Every now and then it snows just not to often it gets cold enough though .It is forecast to be 55-60 here next week currently it's 36 lol I hate the cold weather .

[ryaano18]

Well sometimes it snows but not very often .I'm near the ocean so it often stays rain when storms hit or turns to it and we end up with not much accumulation .Every now and then it snows just not to often it gets cold enough though .It is forecast to be 55-60 here next week currently it's 36 lol I hate the cold weather .

same here, living in texas has corrupted my tolerance for the cold lol we get snow once every couple of years and even when it does snow its only a 1/8 of an inch

[monjarassi]

Wut it dew

[ryaano18]

wut it dew

what it dew baby boo :)

[aLmk]

Well I made the boost leak tester I used all 3" stuff and it fits inside the 4" coupler I have on the front of my turbo perfectly .I will post a few pics shortly .I found 2 leaks right away .

http://i540.photobucket.com/albums/gg360/nextproject97/boostleaktester_zpsf5d77635.jpg

http://i540.photobucket.com/albums/gg360/nextproject97/leaktesterforturbo_zps63eb1d9e.jpg
Wow that makes much more sense to put it inside the coupler for the turbo inlet. I Guess you just had to tap the pvc cap for NPT?

[vdubkilla]

I will be making a new thread later today .I just left Lowes and found a piece that makes the tester about 3" shorter and will be better for tighter engine bays .I ll list the individual components and how to put it together and use it .It's very simple set up and a great tool for anyone with a turbo car as boost leaks will cause all sorts of issues.

Sent from my ADR6300 using Tapatalk 2

[PetefromtheStreets]

Check out my Facebook post on boostedk20's fan page. http://img.tapatalk.com/d/13/11/26/7e9ydyse.jpg

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

http://i681.photobucket.com/albums/vv176/Bboy_Burst/SacRaceway162-2_zps157aa623.jpg

[ryaano18]

morning gentlemen!

[PetefromtheStreets]

Morning

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Morning

[PetefromtheStreets]

Fun fact of the day : I'm looking for a new daily driver. Think I found one.

s4 IG-petefromthestreets
Cage plus radio member #1

[ryaano18]

Fun fact of the day : I'm looking for a new daily driver. Think I found one.

s4 IG-petefromthestreets
Cage plus radio member #1

which car/bike/truck are you looking at?

[PetefromtheStreets]

which car/bike/truck are you looking at?

2000 subaru 2.5RST

s4 IG-petefromthestreets
Cage plus radio member #1

[ryaano18]

2000 subaru 2.5RST

s4 IG-petefromthestreets
Cage plus radio member #1

nice, dont make it a money pit lol

[PetefromtheStreets]

nice, dont make it a money pit lol

LOL already have one of those. This is to be a new daily driver only. Just with a little coolness thrown in.

s4 IG-petefromthestreets
Cage plus radio member #1

[Si Speed 317]

I love that subie! :drooling:

[vdubkilla]

I love that subie! :drooling:

Lots of people like em including myself I'd rock one .Although I like most cars and trucks made in Japan

[Spaz]

Morning all

Sent from my SCH-I545 using Tapatalk

[ryaano18]

Morning morning

[Bottled Morphine]

Morning all

Sent from my SCH-I545 using Tapatalk

Good morning!



Morning morning



Fuel system king crew member #1

[vdubkilla]

Morning

[vdubkilla]

I just ordered two of these from Jegs http://www.jegs.com/i/JEGS+Performance+Products/555/11063/10002/-1 About a week ago I found out one of my bosch 044 s wasnt running due to a faulty relay and I didn't know it .I'm gonna pull a wire from the hot sides of both pumps to these up front where I can see them one for each pump. That way I'll know both pumps have power all the time .

[Si Speed 317]

Top of the mornin!

[Bottled Morphine]

I just ordered two of these from Jegs http://www.jegs.com/i/JEGS+Performance+Products/555/11063/10002/-1 About a week ago I found out one of my bosch 044 s wasnt running due to a faulty relay and I didn't know it .I'm gonna pull a wire from the hot sides of both pumps to these up front where I can see them one for each pump. That way I'll know both pumps have power all the time .

Great idea

Fuel system king crew member #1

[vdubkilla]

Top of the mornin!

Morning


Great idea

Fuel system king crew member #1

Those 044's are noisy even just one of them and I hadn't a clue one wasn't running .This will solve that problem so it doesn't happen again for a mere 20 bucks .

[Bottled Morphine]

Any idea what happened that it wasn't receiving power?

Fuel system king crew member #1

[vdubkilla]

Any idea what happened that it wasn't receiving power?

Fuel system king crew member #1

Yeah I have the painless wiring harness for all three pumps and one of the relays was faulty not powering the pump .
http://www.jegs.com/i/Painless+Performance+Products/764/50102/10002/-1

[ryaano18]

I just ordered two of these from Jegs http://www.jegs.com/i/JEGS+Performance+Products/555/11063/10002/-1 About a week ago I found out one of my bosch 044 s wasnt running due to a faulty relay and I didn't know it .I'm gonna pull a wire from the hot sides of both pumps to these up front where I can see them one for each pump. That way I'll know both pumps have power all the time .

Oh wow thats actually a really good idea! i definitely have to order a couple of those

[vdubkilla]

I buy a lot of stuff from Jegs they have a ton of stuff , ship fast , and are reasonable .

[Si Speed 317]

vdubkilla is a smart guy for sure! Do you minding posting a DIY w pics for the indicator lights when you get them?

[vdubkilla]

vdubkilla is a smart guy for sure! Do you minding posting a DIY w pics for the indicator lights when you get them?

Thanks and I'll try lol

[vdubkilla]

Happy Thanksgiving Everyone

[PetefromtheStreets]

Happy Thanksgiving Everyone
Happy thanksgiving to you as well mark.


Yeah I have the painless wiring harness for all three pumps and one of the relays was faulty not powering the pump .
http://www.jegs.com/i/Painless+Performance+Products/764/50102/10002/-1

A friend of mine installed 2 digital pressure gauges 1 per pump. Because even if it has power it could still not be flowing or not flowing as much from a restrictions.


s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Happy thanksgiving to you as well mark.



A friend of mine installed 2 digital pressure gauges 1 per pump. Because even if it has power it could still not be flowing or not flowing as much from a restrictions.


s4 IG-petefromthestreets
Cage plus radio member #1

Thanks Adam and I also ordered a fuel pressure gauge that will be here on Friday it's an auto meter gauge that matches all of my current gauges and will mount inside the car rather than the one I have now that is mounted on the fpr thats not worth a damn to me when I'm driving the car as ya can't see under the hood.

http://www.jegs.com/i/Auto-Meter/105/5763/10002/-1?parentProductId=745242

[PetefromtheStreets]

Thanks Adam and I also ordered a fuel pressure gauge that will be here on Friday it's an auto meter gauge that matches all of my current gauges and will mount inside the car rather than the one I have now that is mounted on the fpr thats not worth a damn to me when I'm driving the car as ya can't see under the hood.

http://www.jegs.com/i/Auto-Meter/105/5763/10002/-1?parentProductId=745242

Sounds like you've got it covered then. :thumb: and Yea the gauge on the fpr is only worth anything even your tuning to set a base fuel pressure.

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Yeah don't want another pump out without knowing it as that could be bad

Sent from my ADR6300 using Tapatalk 2

[Spaz]

Happy thanksgiving everyone!

Sent from my SCH-I545 using Tapatalk

[Bottled Morphine]

Happy thanksgiving everyone!

Sent from my SCH-I545 using Tapatalk

Happy turkey day man

Fuel system king crew member #1

[BoostedK20]

Happy Thanksgiving!

[monjarassi]

My engine builder putting the final touches on his motor b4 heading down to TX and do mine!!

https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/1422345_246574815498489_1720896912_n.jpg

[Si Speed 317]

My engine builder putting the final touches on his motor b4 heading down to TX and do mine!!

https://scontent-a-ord.xx.fbcdn.net/hphotos-ash3/1422345_246574815498489_1720896912_n.jpg

ID 2000cc's! Looks nice, great IM. Did he have the fuel rail AN fitting anodized?

[aLmk]

ID 2000cc's! Looks nice, great IM. Did he have the fuel rail AN fitting anodized?
I'm pretty sure all AN fittings are anodized.

[Si Speed 317]

I'm pretty sure all AN fittings are anodized.

Anodized purple*

[vdubkilla]

Anodized purple*

http://www.youtube.com/watch?v=epgXuMB1sF8

[monjarassi]

i believe so not really sure on that

[Bottled Morphine]

http://www.youtube.com/watch?v=epgXuMB1sF8

Someone's gonna sue because they felt their child was traumatized by that...and makes millions lol.

Fuel system king crew member #1

[vdubkilla]

Someone's gonna sue because they felt their child was traumatized by that...and makes millions lol.

Fuel system king crew member #1

Your probably right on that one

[monjarassi]

Someone's gonna sue because they felt their child was traumatized by that...and makes millions lol.

Fuel system king crew member #1

true!!!!

seeing your stuff getting done is gonna make me go s2k cluster!!

[Bottled Morphine]

true!!!!

seeing your stuff getting done is gonna make me go s2k cluster!!

Lol I'll sell you mine when I save up enough for that iq3 :)

Fuel system king crew member #1

[vdubkilla]

Here is shot of my gauge set up I am probably gonna re-cut the top gauge mounting plate or maybe both as the cut is a little rough .I am gonna try and get a piece of carbon fiber so it looks a little better but these will work for now.

http://i540.photobucket.com/albums/gg360/nextproject97/IMAG0965_zpsbdbf6960.jpg

[Bottled Morphine]

Here is shot of my gauge set up I am probably gonna re-cut the top gauge mounting plate or maybe both as the cut is a little rough .I am gonna try and get a piece of carbon fiber so it looks a little better but these will work for now.

http://i540.photobucket.com/albums/gg360/nextproject97/IMAG0965_zpsbdbf6960.jpg

Impressive man, looks like a clean install. Looks bad ass!

Fuel system king crew member #1

[monjarassi]

dang that looks sick man!!!!

Fawk u need more AEM going on there!!!

[monjarassi]

im a have all 3 AEM gauges, af, water temp, and oil pressure

[monjarassi]

Lol I'll sell you mine when I save up enough for that iq3 :)

Fuel system king crew member #1


:jelly:

[vdubkilla]

Impressive man, looks like a clean install. Looks bad ass!

Fuel system king crew member #1

Thanks man the bottom three gauges have been there all year the top two I just made the template tonight it's a lil rough but it'll work the LEDs are for my pumps to confirm they have 12 volts to them at all times after losing a relay last week and not even knowing a pump wasn't getting power


dang that looks sick man!!!!

Fawk u need more AEM going on there!!!

HaHa yeah gauges are expensive even these auto meter gauges aren't cheap when ya have this many the Wide band doesn't match to well but it works for me .I'd like to replace with all AEM but I would spend to much replacing all these with all AEM gauges .

[monjarassi]

Thanks man the bottom three gauges have been there all year the top two I just made the template tonight it's a lil rough but it'll work the LEDs are for my pumps to confirm they have 12 volts to them at all times after losing a relay last week and not even knowing a pump wasn't getting power



HaHa yeah gauges are expensive even these auto meter gauges aren't cheap when ya have this many the Wide band doesn't match to well but it works for me .I'd like to replace with all AEM but I would spend to much replacing all these with all AEM gauges .

Truffff, thats why you should do one by one so the pain in the wallet is much.

[monjarassi]

So i been having a dilema, im looking for a new fuel rail but want a custom one like this.

http://www.jhpusa.com/store/pc/catalog/skunk2/sk2.ultra.primaryfuelrail9_d.jpg

But not junk2

[vdubkilla]

So i been having a dilema, im looking for a new fuel rail but want a custom one like this.

http://www.jhpusa.com/store/pc/catalog/skunk2/sk2.ultra.primaryfuelrail9_d.jpg

But not junk2


LOL good man I am glad to hear ya like good parts .I refuse to buy or use ANY skunk 2 parts on my car .Thats a nice looking fuel rail and I guess skunk 2 parts have their place but that place is not on my car .

[monjarassi]

LOL good man I am glad to hear ya like good parts .I refuse to buy or use ANY skunk 2 parts on my car .Thats a nice looking fuel rail and I guess skunk 2 parts have their place but that place is not on my car .

well said there pal/ High 5

[Bottled Morphine]

Kinsler? Try em.


Fuel system king crew member #1

[vdubkilla]

well said there pal/ High 5

:thumb:


Kinsler? Try em.


Fuel system king crew member #1

Do they make a fuel rail like that ?

[Bottled Morphine]

Absolutely. They have a lot of details so I'm sure you could get it exactly how you want it. http://img.tapatalk.com/d/13/11/30/a2epedyb.jpg

Fuel system king crew member #1

[monjarassi]

they have some nice billet stuff no rails doh.

[Bottled Morphine]

I was gonna go that route before I found my pro1000

Fuel system king crew member #1

[monjarassi]

yea just seen this too

http://www.kinsler.com/manifolds2/honda/K_Series/blu_top_angle.jpg

[vdubkilla]

well said there pal/ High 5


Kinsler? Try em.


Fuel system king crew member #1

I'm just running the Golden Eagle rail

[monjarassi]

i have that one too now since 2009. Time to upgrade to some diff

[monjarassi]

OMG just got disgusted by this!!!!!

http://i969.photobucket.com/albums/ae176/94romeo94/5B590E97-51C5-4583-91C1-F23B45E873BB-69775-000006C2307BA07C_zps2bcffabd.jpg

[Si Speed 317]

I have a new rail going in shortly. Injectors, fuel pump, and maybe an fpr too

[vdubkilla]

I don't really have the need to upgrade mine yet .I need them gears doe ! then maybe I'll need more fuel but for now it's plenty for my build .

[vdubkilla]

OMG just got disgusted by this!!!!!

http://i969.photobucket.com/albums/ae176/94romeo94/5B590E97-51C5-4583-91C1-F23B45E873BB-69775-000006C2307BA07C_zps2bcffabd.jpg

Words can not explain my feelings on this :flush:


I have a new rail going in shortly. Injectors, fuel pump, and maybe an fpr too

:wavey:

[monjarassi]

o btw fellas my engine builder has a new HYBRID RACING FPR in the box hes selling for 100 bucks.

Some one hop on this bad boy!!

[Si Speed 317]

Words can not explain my feelings on this :flush:



:wavey:

You're gonna like it!

[vdubkilla]

You're gonna like it!

haha I meant the pic of the Volkswagen with destroyed fenders !

[vdubkilla]

You're gonna like it!

whatcha putting the fuel set up in though ?

[monjarassi]

haha I meant the pic of the Volkswagen with destroyed fenders !

o no thats a fa5 civic si

:puke::puke::puke:

[vdubkilla]

o no thats a fa5 civic si

:puke::puke::puke:

OMG thats horrible I thought it was a VW

[monjarassi]

Yo peeps any one here have a ktuned V1 tps??

Was there any probs with the V1 that the V2 was released??

[vdubkilla]

Yo peeps any one here have a ktuned V1 tps??

Was there any probs with the V1 that the V2 was released??

I am pretty sure they were having issues with them but really not sure I have never used one . I have always run an OEM tps and never have had a problem with it in over 3 years now .

[monjarassi]

i read on a quick search that the only diff now is the v2 is a plug n play the v1 needed to be wired into the harness.

i had the oem tps on the car since 2005 and not once it failed but got sold with the tb

[vdubkilla]

I just read the same about the plug and play

[Si Speed 317]

AFAIK it's just a harness PnP difference!

[vdubkilla]

:pimp:

[Bottled Morphine]

Damn guys...R.I.P. to Paul Walker... the guy who got me into wanting to mod a car before I even had a license...

Fuel system king crew member #1

[Si Speed 317]

http://www.BoostedK20.com/forums/showthread.php?t=997

[ryaano18]

Morning gentlemen

[vdubkilla]

Morning

Sent from my ADR6300 using Tapatalk 2

[Si Speed 317]

Wassup everyone! So hows everyone taking Paul Walker's death?

[PetefromtheStreets]

Honestly I feel like I knew him. It just goes to show how fragile life is.

s4 IG-petefromthestreets
Cage plus radio member #1

[Spaz]

My GF cried and I died a little inside...

Sent from my SCH-I545 using Tapatalk

[Spaz]

Feels like a guy you really grew up with

Sent from my SCH-I545 using Tapatalk

[PetefromtheStreets]

Feels like a guy you really grew up with

Sent from my SCH-I545 using Tapatalk

Exactly

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

I still wish it wasn't true. Realtalk.

[Si Speed 317]

Same here. Though I've always known it, it reminded me of how fast life goes by. I went out immediately to my local Dave n Busters and played FnF, with the Supra and the track was Race Wars. I won though. Did it for Paul. Also had a Blue Moon in his honor. Once in a blue moon they say...

[Spaz]

I still wish it wasn't true. Realtalk.

This. .

Sent from my SCH-I545 using Tapatalk

[ryaano18]

hey guys not sure if dumb question or not, but is there a way to know (beforehand of purchasing) which wristpins will fit a rod? Ex. Im about to purchase some wiseco pistons with upgraded wrist pins however i was told that i need to verify that the wrist pins will work with the BC Rods... any input? Correction?

[Spaz]

I haven't had any troubles nor thought of it actually. We did upgraded wrist pins in krods. No troubles. Could call the rod company

Sent from my SCH-I545 using Tapatalk

[ryaano18]

I haven't had any troubles nor thought of it actually. We did upgraded wrist pins in krods. No troubles. Could call the rod company

Sent from my SCH-I545 using Tapatalk

Oh ok, i was hoping there was list or something. Well...time to put away the anxiety and talk to the companies on the phone for answers lol

[PetefromtheStreets]

hey guys not sure if dumb question or not, but is there a way to know (beforehand of purchasing) which wristpins will fit a rod? Ex. Im about to purchase some wiseco pistons with upgraded wrist pins however i was told that i need to verify that the wrist pins will work with the BC Rods... any input? Correction?

Wrist pins should be a standard diameter just the wall thickness is greater in the upgraded pins. I would call the rod company and piston company both and ask

s4 IG-petefromthestreets
Cage plus radio member #1

[ryaano18]

Wrist pins should be a standard diameter just the wall thickness is greater in the upgraded pins. I would call the rod company and piston company both and ask

s4 IG-petefromthestreets
Cage plus radio member #1

Waiting to hear back from the 1st company, i see many similar builds but im just being cautious since is my first motor build

[Si Speed 317]

http://m.wdsu.com/national-news/autopsy-results-released-in-walker-rodas-crash/-/17429980/23284830/-/fpjk1y/-/index.html

[Spaz]

Still secretly waiting for the hoax :/

Sent from my SCH-I545 using Tapatalk

[monjarassi]

Just picked up my wife a 6ft noble!!! O she happy!!!!

[vdubkilla]

Waiting to hear back from the 1st company, i see many similar builds but im just being cautious since is my first motor build

Adam s right they should be fine/ standard size but I understand being careful and calling the company as I'm always a double checker . I have found it best to "check it twice build it once" I also did upgraded pins for a little added insurance

[ryaano18]

Adam s right they should be fine/ standard size but I understand being careful and calling the company as I'm always a double checker . I have found it best to "check it twice build it once" I also did upgraded pins for a little added insurance

Im still waiting for a call back from Wiseco so i can go ahead and order these already. Looks like i have to call them again and bug them =\

Morning everyone!

[Bottled Morphine]

Im still waiting for a call back from Wiseco so i can go ahead and order these already. Looks like i have to call them again and bug them =\

Morning everyone!

Good morning! And yeah, just stay on top of them.

Fuel system king crew member #1

[monjarassi]

no more JDM carpet, bcuz racekar

http://farm8.staticflickr.com/7378/11230147033_68d869039c_c.jpg

[vdubkilla]

no more JDM carpet, bcuz racekar

http://farm8.staticflickr.com/7378/11230147033_68d869039c_c.jpg

You'll hear things you have never heard before lol cars get echoy if thats a word w/o carpet

[monjarassi]

O yea I bet. Screw it I was tired of the carpet either way.

[vdubkilla]

O yea I bet. Screw it I was tired of the carpet either way.

Do you have a head liner ?

[monjarassi]

No sirre haven't had one for 1yr

[vdubkilla]

No sirre haven't had one for 1yr

Damn that is a racecar I still have my carpet and head liner but like a fool I removed the heat it really isn't bad cause 99% of the time I ride with my window down anyway but I kind wish I hadnt pulled it .

[monjarassi]

Damn that is a racecar I still have my carpet and head liner but like a fool I removed the heat it really isn't bad cause 99% of the time I ride with my window down anyway but I kind wish I hadnt pulled it .

Yea. O well I pulled everything out. STRICTLY RACEKAR

[PetefromtheStreets]

Yea. O well I pulled everything out. STRICTLY RACEKAR

#PFTS Approved


I've goy some big boy parts in the works for this winters build

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

O yea... Sounds interesting

[PetefromtheStreets]

O yea... Sounds interesting

Replacing some of my off the shelf parts. Like the header, exhaust, ect. I wanna make power like the turbo guys.

s4 IG-petefromthestreets
Cage plus radio member #1

[monjarassi]

Replacing some of my off the shelf parts. Like the header, exhaust, ect. I wanna make power like the turbo guys.

s4 IG-petefromthestreets
Cage plus radio member #1


Challenge accepted

Definitely achievable

[Bottled Morphine]

Smh

Fuel system king crew member #1

[Spaz]

Another morning.... working retail in a Christmas holiday is the worst... stressful for sure

Sent from my SCH-I545 using Tapatalk

[PetefromtheStreets]

Played way too much basketball last night. My body is so sore and stiff. End of my useless rant.

Good morning fellas


s4 IG-petefromthestreets
Cage plus radio member #1

[ksboi]

My view from my room

http://imagizer.imageshack.us/v2/xq90/189/2ayh.jpg (http://imageshack.com/i/592ayhj)

[PetefromtheStreets]

My view from my room

http://imagizer.imageshack.us/v2/xq90/189/2ayh.jpg (http://imageshack.com/i/592ayhj)

Nice view. How is it?

s4 IG-petefromthestreets
Cage plus radio member #1

[ksboi]

Nice view. How is it?

s4 IG-petefromthestreets
Cage plus radio member #1

its nice had mcdonalds delivered lol

[PetefromtheStreets]

its nice had mcdonalds delivered lol

Lmao

s4 IG-petefromthestreets
Cage plus radio member #1

[vdubkilla]

Morning where and how the hell has everyone been lately ? Snowing / raining here today

[Spaz]

Wait what McDonald's delivered?

Sent from my SCH-I545 using Tapatalk

[vdubkilla]

Wait what McDonald's delivered?

Sent from my SCH-I545 using Tapatalk


:fyea:

[aLmk]

Good man, snowing a lot here in northern DE. We already got like 4''.

[vdubkilla]

Good man, snowing a lot here in northern DE. We already got like 4''.

It has turned to rain here and thats fine with me I hate the snow unless it's a considerable amount like 8-10 + and that seldom ever happens here :(

[aLmk]

It has turned to rain here and thats fine with me I hate the snow unless it's a considerable amount like 8-10 + and that seldom ever happens here :(
Ya I hate snow too. It's fine if it's at the mountains, but I got shit to do today lol. And I need to work, and that will either get canceled or suck because of the snow.

[vdubkilla]

Ya I hate snow too. It's fine if it's at the mountains, but I got shit to do today lol. And I need to work, and that will either get canceled or suck because of the snow.

Yeah trust me it really messes up my work lol Well I am gonna go get a battery for my truck as it's gonna be 6 years old and I don't want it to leave me .It hasn't given me any issues as of yet but it's only a matter of time before it does so I'm gonna go do that and maybe go grab a burger on this crappy day .

[PetefromtheStreets]

http://img.tapatalk.com/d/13/12/09/a7agymat.jpg

s4 IG-petefromthestreets
Cage plus radio member #1

[Bottled Morphine]

Lame ^^^^

Fuel system king crew member #1

[vdubkilla]

Dam Adam got a lil coating there its all rain here now and I am out for that burger I mentioned earlier

Sent from my ADR6300 using Tapatalk 2

[Spaz]

It's snowing horrible here. Took almost 4 hours to drive a 2 hour trip home just now. I'm so tired

Sent from my SCH-I545 using Tapatalk

[vdubkilla]

It's snowing horrible here. Took almost 4 hours to drive a 2 hour trip home just now. I'm so tired

Sent from my SCH-I545 using Tapatalk

Wow thats def stressful glad ya made it home safe though here is a video somebody posted earlier on fb

http://www.youtube.com/watch?v=kRrZ1qHJ2jQ

[Bottled Morphine]

Wow thats def stressful glad ya made it home safe though here is a video somebody posted earlier on fb

http://www.youtube.com/watch?v=kRrZ1qHJ2jQ

Wow...that's crazy...

Fuel system king crew member #1

[ryaano18]

Morning everyone!

[PetefromtheStreets]

Morning peeps

s4 IG-petefromthestreets
Cage plus radio member #1

[Si Speed 317]

Morning homies! Installed a new battery yesterday, upgraded from the Everlast battery from Walmart. Man, those are a great bang for your buck. But I upgraded this time around. I've been seeing all these battery commercials about how Duracell batteries are greatly reliable and used in the medical field for their reliability. Well, I like reliability, so I got this new Panasonic Duracell battery.

http://img.tapatalk.com/d/13/12/09/e8evytyp.jpg

Thing looks cool, and it's sealed so you can mount it any way you'd like. Despite the urge to mount this upside down, I mounted it normally in it's new home.

http://img.tapatalk.com/d/13/12/10/eqebuze2.jpg

Downside was the terminals were reverse polarity but in the exact same spot as my last battery. ASSuming they were the same (because I had no reason not to, my last 2 batteries were all different companies but the same terminal polarities), I connected it and blew my main fuse. THANK GOD for main fuses.

http://img.tapatalk.com/d/13/12/10/huny8uma.jpg

And that's my weekend. Oh, I also did most of the lights on my house but they're not finished yet.

http://img.tapatalk.com/d/13/12/10/evygeren.jpg

[vdubkilla]

Morning everyone glad that fuse saved ya from major issues and I don't know if I'm gonna put up lights I kinda stopped doin it the past few years.Looks like ya got a coating of snow yesterday .

[PetefromtheStreets]

Damn. So you hooked the positive and negative up wrong? Looks like a good battery tho.

s4 IG-petefromthestreets
Cage plus radio member #1

[Spaz]

Ouch lol

Sent from my SCH-I545 using Tapatalk

[ryaano18]

morning gentleman! i dont know about yall but 36 degrees here in texas and it might as well be a blizzard

[Bottled Morphine]

Good morning! Got some sleet, and slight accumulation that's about it here.

Fuel system king crew member #1

[ryaano18]

Good morning! Got some sleet, and slight accumulation that's about it here.

Fuel system king crew member #1

how low does the temperature get up there?

[PetefromtheStreets]

how low does the temperature get up there?

Its gotten to single digits before but not in a long time here in MD. It's mid to low 30's right now.

s4 IG-petefromthestreets
Cage plus radio member #1