PDA

View Full Version : K20A2 Boosted Daily



MajorWeak
10-16-2013, 11:44 PM
Hello Boostedk20!
I went and updated this post with all the latest news. Even while being boosted i still plan on keeping it as my daily. Ill get some videos up when i can! Enjoy & Thanks for looking


Parts List


Engine
K20A2
Rev Hard T3/T4 Turbo
EMUSA Intercooler
Greddy BOV
Tial Wastegate
550cc RC Injectors
Nology Hotwire
Hondata K-Pro
Skunk 2 3inch Cat-Back
ITR LSD Tranny
Competition Clutch Stage4 Clutch
Competition Ultra Light Flywheel (8lbs)
Buddyclub Short Shifter
Hybrid Racing Fuel Rail/Fuel Pressure Gauge (Feed&Return Setup) (Needs to be installed)
Walbro 225 Fuel Pump

Exterior
Buddyclub Side Skirts
Custom Kelvar Duckbill Wing
04-05 CTR TSK RetroFitted Headlights
External Battery Terminals
8000k HID Kit
Carbon Fiber Fenders
JDM Preface Lift Front Bumper (Needs to be installed)
JDM Preface Lift Type R Lip (Needs to be installed)
JDM Rear Bumper (Needs to be installed)
Jdm Type R Rear Lip (Needs to be installed)

Interior
DIY Flat Black Center Dash
Custom Brushed Aluminium Placards
Custom X Brace
J's Racing C pillar
No Name Mid Rear Bar
Wink 5 Panel mirror
S2k Start button
RSX-S Hazard button
RSX-S Tan Shift Knob
burrberry door panels
Cusco Door Bars
Buddyclub Super Low Rails Driver/Passenger
Bride Zeta II Driver/Passenger
Takata Harnesses
Pioneer Fold Out TV
HKS Turbo Timer

Wheels/Suspension
RSX 5 lug Swap
Orange 02-04 RSX Stocks
Falken 225/50/16
Ingalls front/rear Camber Kit
Tokico Blues W/ H&R Springs
Gold Skunk2 LCA
Gold Beaks Lower Tie Bar


Summer 2011
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-04-24193801-1.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/100_2505THRID.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/100_2516.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/100_2527.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/100_2524SECOND.jpg

Dropped It Lower 2012
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-07-13183252.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-07-13183458.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/Forumphoto1.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/forumphoto2.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/forumphoto7.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/forumphoto3.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/forumphoto6.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/forumphoto5.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/100_2611.jpg

NA K20A3 Runs.
Dont mind the cluster lights...lol

18-98mph?
http://i181.photobucket.com/albums/x240/StraightEpPower/th_M2U00008.jpg (http://s181.photobucket.com/albums/x240/StraightEpPower/?action=view&current=M2U00008.mp4)

1st-4th gear
http://i181.photobucket.com/albums/x240/StraightEpPower/th_M2U00009.jpg (http://s181.photobucket.com/albums/x240/StraightEpPower/?action=view&current=M2U00009.mp4)

My spark plug shot out and it landed by my headers when i was pulling out of the gas station. All the threads on the plug are good but the spacer tip was broken off.

Friday:
This took a turn for the worst today.... I test the threads on the far passenger side with a new plug and they were good. When i got to the third one going from passenger to driver the plug was seized. I use liquid wrench and finally got it to break free but when i pulled the plug half the threads and the head of the plug was gone. i looked in to find them still locked in there. So, i left to the auto parts store and get an EZ out. After 3 adapters and 3 sockets i got it to break free! No.. not really, the EZ out shattered and the tip is lock in the head of the plug thats locked into the cylinder...woot...pulling the head tomorrow.

Sunday:
Ya, the way that bitch is seized in there, i'm going to have to use a drill press to try and get it out. Than re thread it. I'm just hoping that this is the last of my problems on this cause its my daily

I called it a day, I'll be back at it after work. Here some shots of the day...


Cliff notes:
Far passenger side spark plug shot out while driving. Threads are good. than..
third one going from passenger to driver has an EZ out broken and seized in a broken spark plug head thats seized in there. In process of pulling the head.

http://i181.photobucket.com/albums/x240/StraightEpPower/2011-10-23184606.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-10-23184456.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-10-23184336.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-10-23134402.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2011-10-23134704.jpg

Said fuck the k20a3 and went with k20a2 w boost swap!
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-01-08154115.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-01-08154024.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-01-10213636.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-01-10213618.jpg

She is back from the winter! Still have a ways to go. 2012
Got my Odyssey battery in with the re locator kit.
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-05-05171632.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-05-05205132.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-04-28172226.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-05-09202257.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-05-11205916.jpg

Spring 2013
Hybrid Racing Fuel Rail/Fuel Pressure Gauge (Feed&Return Setup)
http://i181.photobucket.com/albums/x240/StraightEpPower/5cd6a0be-6ffc-403f-b07a-200f0996089e_zps6ba9034b.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/ec54e0e9-2148-4cd1-a7b7-600dc0c1156e_zps89732192.jpg

Battery Jumper Posts
http://i181.photobucket.com/albums/x240/StraightEpPower/555f4f88-465b-40cd-91e2-b601ac310852_zps66740351.jpg

M&M Racing Adjustable Tie-Rods
http://i181.photobucket.com/albums/x240/StraightEpPower/eea5125d-d340-4d5e-a032-10c9cec6568f_zps72693763.jpg

Takata Harnesses
http://i181.photobucket.com/albums/x240/StraightEpPower/66f79d02-983b-4ea9-adc7-68ed367923a9_zps044c3188.jpg

Pre Face Lift JDM Front Bumper W/ Type R Lip
http://i181.photobucket.com/albums/x240/StraightEpPower/a092d74d-5d45-4f6b-b7e0-50db09953e1b_zps45ce55c3.jpg

Extended Wheel Studs
http://i181.photobucket.com/albums/x240/StraightEpPower/2013-02-17163403_zpsc3daa9a1.jpg

Custom Brushed Aluminium Placards Made By Me
http://i181.photobucket.com/albums/x240/StraightEpPower/6a092ad0-a52a-4d57-a579-4a03fd5aa823_zps105ff5d6.jpg

Custom Made Kelvar Duckbill Wing
http://i181.photobucket.com/albums/x240/StraightEpPower/0afe0a9b-dd0d-469b-99e0-688624d76645_zps938853e1.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/Picture014_zps2dcc54dd.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/e693a98c-5174-4339-9b20-bcfbf0b54fa0_zps68d2e2c7.jpg

Pasi-Dipped the duckbill to see if i wanna color match it
http://i181.photobucket.com/albums/x240/StraightEpPower/2013-01-31164231_zpsf0b57536.jpg

FEEL's Grille & CTR Headlights Installed
http://i181.photobucket.com/albums/x240/StraightEpPower/958e207e-76e1-42d4-9dd5-9e20dfab8e2a_zpsf58bafd9.jpg

http://i181.photobucket.com/albums/x240/StraightEpPower/00be9234-0559-4e92-857f-5e9bf89112bc_zpsd9c5b6a1.jpg


Fall 2013
http://i181.photobucket.com/albums/x240/StraightEpPower/20131013_174853_zpsb587b606.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131013_174927_zps015ed186.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/41fe3356-923e-48e4-8d60-8ac3a0fcbb59_zps69706ee9.jpg
http://i.imgur.com/BEuI5eU.jpg
http://i.imgur.com/1rxgqXP.jpg
http://i.imgur.com/GgxwRqY.jpg
http://i.imgur.com/iLwM5P8.jpg
http://i.imgur.com/THUOKPF.jpg
http://i.imgur.com/13PcMU3.jpg
http://i.imgur.com/x2inxNl.jpg
http://i.imgur.com/PQ0Z0gI.jpg
http://i.imgur.com/K8lfgcO.jpg
http://i.imgur.com/rITYnie.jpg
http://i.imgur.com/ZaBYTYR.jpg

MajorWeak
10-16-2013, 11:46 PM
Reserved.

MajorWeak
10-16-2013, 11:47 PM
Reserved.

boosted_teg
10-17-2013, 01:36 AM
i actually really like the 2011 ep3 version. Its hard to find nice EP3 around. i like it. I bet those fenders werent cheap

monjarassi
10-17-2013, 03:38 AM
Nice thread layout.

And boostedteg, ep3 weren't made in 2011 :confused:

MajorWeak
10-18-2013, 12:39 AM
Nice thread layout.

And boostedteg, ep3 weren't made in 2011 :confused:

Yeah, Ep3's were from 02-05 and also the last civic hatch there will be.

MajorWeak
10-18-2013, 12:42 AM
Got my 15mm spacers in. I work a half day tomorrow , i will test fit and post pictures. I just hope I clear the fenders and don't rub in the front. :ohnoes:

MajorWeak
10-20-2013, 10:17 PM
My friend came by with her Cannon Rebel XS. I had just got done with the DIY and didn'y have time to throw back on the hood.

Here are the pictures. Enjoy!

MajorWeak
10-20-2013, 10:19 PM
http://i.imgur.com/BEuI5eU.jpg
http://i.imgur.com/1rxgqXP.jpg
http://i.imgur.com/GgxwRqY.jpg
http://i.imgur.com/iLwM5P8.jpg
http://i.imgur.com/THUOKPF.jpg
http://i.imgur.com/13PcMU3.jpg
http://i.imgur.com/x2inxNl.jpg
http://i.imgur.com/PQ0Z0gI.jpg
http://i.imgur.com/K8lfgcO.jpg
http://i.imgur.com/rITYnie.jpg
http://i.imgur.com/ZaBYTYR.jpg

monjarassi
10-20-2013, 10:34 PM
She's looking good pal. Keep it up I like beefy tire setups

MajorWeak
10-20-2013, 10:41 PM
Thanks man. It's funny that you say that, my buddy was telling me i should go with a smaller tire to fit the spacers better, but i rather shave the inner fender then do that lol.

bodyman
10-21-2013, 09:05 AM
Nice hatch man, sorry to see the spark plug deal.

Spaz
10-21-2013, 11:09 AM
awesome build. Love the car. Bet it moves out awesome.

MajorWeak
10-22-2013, 11:33 PM
Nice hatch man, sorry to see the spark plug deal.

Yeah, that was a shame. i ended up selling the motor for $300 as is.


awesome build. Love the car. Bet it moves out awesome.

Thanks man. You easily have the nicest rsx in my books. Every mod is something i would have done.

MajorWeak
10-22-2013, 11:47 PM
Need your opinions on somethings guys.

The custom made kevlar duckbill, keep it or put it in storage for a new wing. Mugen, or CTR with j's racing attached.

http://site.icbmotorsport.com/Js_Racing/Js_Racing_3D_GT_Honda_Civic_EP3_DGW1_P3_Pic_4.jpg
http://site.icbmotorsport.com/Js_Racing/Js_Racing_3D_GT_Honda_Civic_EP3_DGW1_P3_Pic_2.jpg
http://www.js-racing.co.uk/dc5parts_pics/ep3_3d_wing.jpg

Mugen
http://showstoppersusa.com/media/catalog/product/cache/1/image/29e1823dca12a0c1b037e860822d5cf3/4/2/42.jpg
http://i.imgur.com/oiuiA.jpg

If i keep it, paint it to match the car or kevlar wrap and resin the cf fenders & cf mugen hood to match the wing.

Next, White diamond racing steelies or rsx stockies. My co-workers friend is trying to sell them. He is unsure yet of the width or offset. He says they're 16x9 and 16x8s + 20 offset...maybe tho. Of course i will have the 9s in front and others in back if they are. they're only 500 with stretch tires that i'll ditch.

monjarassi
10-23-2013, 12:07 AM
rough call

PetefromtheStreets
10-23-2013, 12:08 AM
I like the mugen wing. Not a fan of the double wing thing going on there. And I'd not get those steelies. They remind me of wheels off my trailer.

boosted_teg
10-23-2013, 12:16 AM
http://i.imgur.com/oiuiA.jpg


thats sexy!

PetefromtheStreets
10-23-2013, 12:22 AM
http://i.imgur.com/oiuiA.jpg


thats sexy!

Agreed. That one!

s4 IG-petefromthestreets
Cage plus radio member #1

vdubkilla
10-23-2013, 12:36 AM
agreed

MajorWeak
10-23-2013, 10:41 AM
I like the mugen wing. Not a fan of the double wing thing going on there. And I'd not get those steelies. They remind me of wheels off my trailer.

I agree, I feel the wheels will look really back on a new body style car. I think they look good on a eg, but I won't work on the ep.

So the mugen wing. The wing I sold when I got the duckbill lol.

Carbon fiber or fiberglass for the wing?

boosted_teg
10-23-2013, 12:01 PM
i like the wing to match the body, IF its the mugen one. OR can you paint the side and only have CF in the center section?

ryaano18
10-23-2013, 12:46 PM
since you have a white car, the cf or the all white would look really good. Love the ep3 though!

MajorWeak
10-23-2013, 04:42 PM
i like the wing to match the body, IF its the mugen one. OR can you paint the side and only have CF in the center section?

Yeah I'll go this route. mugen wing matching the car with the adjustable downforce fin kept carbon fiber. And I'll just keep my rsx stockies.

I also need to drop off my cf mugen hood at the shop to get recleared. That way the whole front, minus the bumper is cf.

boosted_teg
10-23-2013, 09:42 PM
that was one of the best things i did, reclear my carbon fiber, except now the heat of the turbo and manifold "melted" the clear

MajorWeak
10-25-2013, 04:43 PM
that was one of the best things i did, reclear my carbon fiber, except now the heat of the turbo and manifold "melted" the clear

Damn that sucks! I'm going to add spacers to the hood bolts to raise the back up to let some of the heat out until i can get the vented mugen on re-done.

The mugen on is primed :thumbdown: I took it to a shop to get painted, check in one day after a couple weeks and the hood was still primed. Took it back cause the turn around time was not as quoted. So, its in the car part room. I need a shop to sand off the prime and re-clear it.

MajorWeak
10-25-2013, 04:51 PM
A couple of updates..

I bought a 3inch unforgettable test pipe, adding spacers to hood to raise rear to let some heat out.

Since I like to be different. I will be making widebody style front fenders. Hoping the end product will look like this.

http://www.carid.com/images/extreme-dimensions/body-kits/duraflex/duraflex-honda-s2000-2009-ams-widebody-front-fenders-5.jpg

They wont stick out that far but they will be open vented as shown minus the crazy shit going on at the bottom. I will post my blueprint design with i finish them up. This is a longer term project.

MajorWeak
10-25-2013, 11:53 PM
Here is the drawings I came up with. I will be modifying the oem fenders into them. Once complete I will make a mold and make a set out of fiberglass. Let the journey begin. :wiggle:

http://i181.photobucket.com/albums/x240/StraightEpPower/df39e27c-ea8a-4a1c-8c5b-3dd3c14fcc20_zpsb1650811.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131025_203844_zpsd9bc6f7a.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131025_203854_zpscb6cbee0.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131025_203849_zpsfdf9428e.jpg

The vented gap will be about 1 inch.

echo3gulf
10-26-2013, 12:24 AM
Love it... I'm sorry but out of all the hatches i love the ep3 the most just cause all the others are over played nice ride man:)

monjarassi
10-26-2013, 01:32 AM
wow man in for the fender project. I spaced mine out 5mm's but i want a nice bulge ontop of the tire.

http://farm8.staticflickr.com/7281/9221093480_6f5ab21aee_b.jpg

MajorWeak
10-26-2013, 11:59 AM
wow man in for the fender project. I spaced mine out 5mm's but i want a nice bulge ontop of the tire.

http://farm8.staticflickr.com/7281/9221093480_6f5ab21aee_b.jpg

Nice kinda of what i'm looking for. did you just add washer to push the mounting points out?

monjarassi
10-26-2013, 10:00 PM
Nice kinda of what i'm looking for. did you just add washer to push the mounting points out?

yes a 10mm washer

MajorWeak
11-04-2013, 01:14 AM
http://i181.photobucket.com/albums/x240/StraightEpPower/20131101_211919_zps3bd9f28d.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131101_221923_zps1fbbc90f.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_150938_zps831105cf.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_151000_zps49379c10.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_165849_zpsd12e8d73.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_170258_zps1562003f.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_174206_zps83464ff5.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_174211_zps24e5b23c.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_174224_zps59ba224e.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131102_174242_zpscad5b5dd.jpg

MajorWeak
11-04-2013, 01:16 AM
I still need to fine tune the shaping. I did mount them to the car tonight and added my 15mm spacers in the front. The vent gap is at 5mm right now. Im unsure it i want to push that out to 10mm.


http://i181.photobucket.com/albums/x240/StraightEpPower/20131103_154011_zpsd544df63.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131103_165023_zps433f22a0.jpg
Without 15mm spacers.
http://i181.photobucket.com/albums/x240/StraightEpPower/20131103_165033_zpsffc6831a.jpg
With spacers.
http://i181.photobucket.com/albums/x240/StraightEpPower/20131103_171242_zps75c4167b.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131103_171254_zps4ef4a908.jpg
http://i181.photobucket.com/albums/x240/StraightEpPower/20131103_172207_zps8257c3e1.jpg

The wheel set up i have on there now is 16x6.5 +45 with 15mm spacers on them.

monjarassi
11-04-2013, 01:41 AM
youd really need to test out a 17x9+35 and see what good

MajorWeak
04-19-2014, 02:59 PM
Specs: 17x8 +35 17x9 +38

http://i203.photobucket.com/albums/aa103/mynameis9/IMG_2154_zpsba9a18a0.jpg (http://s203.photobucket.com/user/mynameis9/media/IMG_2154_zpsba9a18a0.jpg.html)

http://i203.photobucket.com/albums/aa103/mynameis9/IMG_2155_zps7fb811d2.jpg (http://s203.photobucket.com/user/mynameis9/media/IMG_2155_zps7fb811d2.jpg.html)

Started to work on a headlight intake with the extra set of CTR headlights i own
http://i.imgur.com/zUYVHUV.jpg?1
http://i.imgur.com/VGGi0Fw.jpg
http://i.imgur.com/AOmiHqQ.jpg
http://i.imgur.com/J7NhdWi.jpg
http://i.imgur.com/qCBnqCF.jpg
http://i.imgur.com/JwgAkXO.jpg

Battery disconnect arrived
http://i.imgur.com/fJRXKWv.jpg
http://i.imgur.com/mLZZvRc.jpg
http://i.imgur.com/ShbyQT7.jpg

-Gauges in

-Battery disconnect mounted where the AC controls were

-Circuit Hero shift knob

-S2000 push start

-Custom brushed aluminium placards

http://i.imgur.com/rCCL7L7.jpg

CF fenders and hood back on
http://i.imgur.com/NKf9XtF.jpg
http://i.imgur.com/3sK5BRd.jpg
http://i.imgur.com/DLqhz5Y.jpg
http://i.imgur.com/YGMmnow.jpg
http://i.imgur.com/IxQwz3j.jpg

i got some 42"x 24" .10 lexan sheets. I used the other panel as a stenciling tool. I cut the holes for the strap and door release. I'm working on getting Takata tagged door release pulls to keep the Takata theme going. The black is just a mock up. I'll be covering it in matte black vinyl. Also the door still needs to be shaved down so the sheet fits flush. Here is some mock up pictures.

http://i.imgur.com/AdCTRWh.jpg
http://i.imgur.com/ywnK2wm.jpg
http://i.imgur.com/cunyfa1.jpg

I received my Ohlins DFV Coilovers today.
http://i.imgur.com/FDezSzE.jpg

Before ordering them I did some research on them. The dual flow value is an outstanding design for road and track. The valves open, letting the oil flow quicker through the piston on the rebound stroke after hitting a bump, enabling the tires to stay in contact with the road at all times.

http://www.roadandtrackbyohlins.com/wp-content/uploads/2009/08/rt_dfv_fig4.jpg

They have 25 clicks of rebound adjustment, and inverted front strut design. I went with the adjustable camber plates for the front. The spring rates from them are: Front = 450lb/in & Rear 560lb/in.

I'm going to replace my front axles before i throw these on.

Spaz
04-19-2014, 06:30 PM
so jelly of the wheels!!

And damn Ohlins coilovers?! $$$ baller

stigrl06
04-19-2014, 08:44 PM
monjarassi still wants those wheels!!

MajorWeak
04-29-2014, 12:27 AM
so jelly of the wheels!!

And damn Ohlins coilovers?! $$$ baller

Can wait to install them!


monjarassi still wants those wheels!!

I might need wider wheels, He is 1st on my list to get them off me if so.

MajorWeak
04-29-2014, 12:28 AM
Got myself into this mess. All the panels are out besides the driver door. I still need to lose the headliner. I got pressed on time and had to throw the driver seat back in to get to work in the morning. I still need to tuck and rewire a lot but it was good progress this weekend. Its suppose to be in the 70s this week. I'll trying and get some more done during the week.
http://i.imgur.com/R3Bt7z8.jpg
http://i.imgur.com/t1FcRLQ.jpg

I'm trying to feed the addiction of working on the car without spending money. I still new axles and i plan on get M&M racing tie rods, then ill throw the ohlins in.

http://i.imgur.com/qwpTqMp.jpg
http://i.imgur.com/uB9dKVo.jpg
http://i.imgur.com/TUvolxS.jpg
http://i.imgur.com/thOo9JH.jpg

Picked up a harness bar, once it shows up i'll be sending all the bar to get powercoated white

monjarassi
04-29-2014, 12:29 AM
what all going down brah?

love the placement of the banner, props

MajorWeak
04-29-2014, 12:45 AM
Just trying to keep myself busy with free mods. The Ohlins took quite the punch to the wallet. I really want to order a cage but i can let those ohlins sit around. I still have to take the deader out with dry ice and shave the interior so i can paint it. I've been taking notes on Ryan's wire tuck DIY for my interior harness.

monjarassi
04-29-2014, 01:14 AM
Ahhh okay I feel u man. Do work son.

PetefromtheStreets
04-29-2014, 10:04 AM
What are M&M tie rods? Are they tie rod ends or inners? Reason I ask is because I run devinci design inners due to not having enough toe adjustment.


Sent from my stupid iPhone using Tapatalk

aLmk
04-29-2014, 10:41 AM
Woah... Just seeing your spark plug blew out! That's wild! What do you think caused it?

MajorWeak
04-29-2014, 12:35 PM
What are M&M tie rods? Are they tie rod ends or inners? Reason I ask is because I run devinci design inners due to not having enough toe adjustment.


Sent from my stupid iPhone using Tapatalk

I know a few people running those. The M&M Racing tie rods are extremely rare and fully adjustable. I have not seen another set yet aside from the old ones I sold.. These M&M tie rod arms will definitely help to get rid of your steering rack creak if you have any. Here is a pic from the old set i use to own. Only problem is the price tag. You looking at about 550 Shipped from Japan.
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-04-17173825.jpg

MajorWeak
04-29-2014, 12:38 PM
Woah... Just seeing your spark plug blew out! That's wild! What do you think caused it?

I still have no idea what happened. I sold the motor and it is in now in a Integra running fine like it did before all that went down.

BoostedK20
10-05-2015, 08:30 PM
Any updates?! MajorWeak

PetefromtheStreets
10-05-2015, 09:49 PM
I know a few people running those. The M&M Racing tie rods are extremely rare and fully adjustable. I have not seen another set yet aside from the old ones I sold.. These M&M tie rod arms will definitely help to get rid of your steering rack creak if you have any. Here is a pic from the old set i use to own. Only problem is the price tag. You looking at about 550 Shipped from Japan.
http://i181.photobucket.com/albums/x240/StraightEpPower/2012-04-17173825.jpg

I bought some from devinci designs. They were 300. But that was with new tie rods and ends. They would modify your existing one for less. Don't remember exactly. But not a bad deal.


Sent from my iPhone using Tapatalk