PDA

View Full Version : P0606 PCM failure



Lilwhit14
10-16-2013, 03:33 PM
Guys my boosted fa5 is throwing an ecu failure code. My car is fine in lower gears (1-3) but in higher gears with more load (4-6) is only when it does it, but only under full throttle at higher rpms. It's fine just regular driving. I have 1000cc injectors and a walbro 255 pump. My a/f's and oil pressure are all fine so I'm at a loss. I'm also running a Hondata 4bar map sensor tuned with flashpro. Just ordered a new ecu but worried I will pay honda to program it and it still throw the code. Can anyone help?

Lilwhit14
10-16-2013, 03:34 PM
Also, when cel is thrown, it turns my vsa light on and puts my car in limp mode

Si Speed 317
10-20-2013, 05:58 PM
Adm_rsx Spaz vdubkilla VitViper

PetefromtheStreets
10-20-2013, 07:08 PM
I can't begin to think on that one. Very very odd

s4 IG-petefromthestreets
Cage plus radio member #1

Si Speed 317
11-07-2013, 10:37 AM
Any updates? Lilwhit14

Lilwhit14
11-07-2013, 10:51 AM
Any updates? Lilwhit14

Well my pressure plate ring was broken in 3 places so I'm thinking if it was causing enough noise for the knock sensor to pick up that a new clutch will fix it. Atleast that's what I'm hoping.

Si Speed 317
11-09-2013, 02:56 AM
Well my pressure plate ring was broken in 3 places so I'm thinking if it was causing enough noise for the knock sensor to pick up that a new clutch will fix it. Atleast that's what I'm hoping.

Makes sense to an extent. Either way, definitely important to replace before moving forward. How did you figure that out? I'm assuming you dropped the tranny

ksboi
11-09-2013, 03:34 AM
He posted pics on IG, it was in a lot of peices. That is why you go higher on the clutch then what you need so it does not break.

Lilwhit14
11-09-2013, 10:41 AM
Makes sense to an extent. Either way, definitely important to replace before moving forward. How did you figure that out? I'm assuming you dropped the tranny

Yea I tore the car down that day. Been on jack stands for 2 weeks. And my car makes 264ft/lbs. that clutch was a 4 puck race clutch rated for 425ft/lbs. think I went a little over kill. Lol