PDA

View Full Version : fg2taffysi sc build



fg2taffysi
07-07-2013, 11:34 AM
My 06 Taffeta White FG

Follow On Instagram @ Fg2taffysi

http://i213.photobucket.com/albums/cc150/fg2taffysi/1546032_628926560480005_1639798009_n_zps08d36924.j pg (http://s213.photobucket.com/user/fg2taffysi/media/1546032_628926560480005_1639798009_n_zps08d36924.j pg.html)

Tuned By: Evans Tuning
402 Whp 281 Lbft On 93 Octane Pump Gas

Best 1/4 ET 12.2 , 60FT 1.73 , MPH 116

Evans Tunning Dyno Session & Fall Nationals Video

http://i213.photobucket.com/albums/cc150/fg2taffysi/videos/th_fallnationals2_zpsf572075d.jpg (http://i213.photobucket.com/albums/cc150/fg2taffysi/videos/fallnationals2_zpsf572075d.mp4)

Current Mods

IMT Charged Air Cooled
http://www.innovativemotorsportstech.com/

*IMT Custom Blower Pulley
*IMT Big Bore Inlet
*IMT Kool Boost 2.25 Charge-Air Cooler
*IMT Custom High Density Core
*IMT 1.00" Thick Phenolic Supercharger Spacer
*IMT Heat Exchanger
*IMT Custom Fuel Rail Hold Downs
*IMT Reservoir
*IMT High Speed Idler Pulley

SPEC CLUTCH
http://www.specclutches.com/

*Spec Stage 5 Clutch
*Spec Light Weight Flywheel

HYBRID RACING
http://www.hybrid-racing.com/

*Hybrid Racing Fuel Rail
*Hybrid Racing Fuel Pressure Gauge
*Hybrid Racing Shifter Cable Bushings
*Hybrid Racing Slim oil cap
*Hybrid Racing Coolant Temp Sensor Adapter (used for idle air assist delete)
*Hybrid Racing Reservoir Cover
*Hybrid Racing Radiator Cap
*Hybrid Racing T-bolt Radiator Hose Clamps
*Hybrid Racing Shift Knob


WIRE-WORX
http://wire-worx.com/

*Wire-Worx Engine Harness
*Wire-Worx Ground Wires

Engine / Performance Modifications

*Skunk 2 72mm Throttle Body With 80mm Inlet
*Skunk 2 Low Profile Valve Cover Hardware
*Skunk 2 Mega Power Header
*Skunk 2 Intake Manifold Gasket
*Skunk 2 Short Shifter
*Ct-Engineering Supercharger Manifold Powder Coated Super Chrome
*Ct-Engineering Idler Pulley Bracket & Pulleys
*Speed Factory Racing Polished Coil Pack Cover
*Speedfactory Tuning & Race Fabrication Custom Coolant Overflow
*Injector Dynamics 1000 cc Injectors
*Hondata FlashPro
*Hondata 4 Bar Map Sensor
*Sheepey INC Custom Catch Can
*Trac Tuff Water By Pass Adapter
*T1r race devlopment IAT Sensor
*k24 Crank Pulley
*Walbro 255 fuel pump
*Full Race 3 Inch Exhaust
*Custom 3.5 Inch Intake
*Vibrant 3.5 - 3.25 Silicone Reducer
*Vibrant T Clamps
*Vibrant -An Fittings
*Vibrant -An Braided Hose
*Aem Dry Filter With Hydro Shield
*Clutchmasters Stage 2 clutch
*Valve Cover Powder Coated Black Chrome
*Motor Mounts Powder Coated Super Chrome
*Downstar v.3 Black Hardware - on coil pack cover, coolant fill neck, coolant overflow, radiator bracket, upper radiator support, fenders, hood hinge, ground wires, ac line bracket
*Downstar Motor Mount Bolts - with black beauty washers
*Downstar Supercharger Manifold Bolts - with black beauty washers
*Downstar Idler Pulley Bracket Bolts -with black beauty washers
*Downstar Water Bypass Adapter Bolts - with black beauty washers
*Password Jdm Battery Relocation Kit
*Odyssey 680 Battery
*AEM Wide Band UEGO
*AEM Boost Gauge
*Boomba Racing Motor Mounts
*JDM Dipstick
*Mugen Radiator Cap

Wheels / Suspension Modifications
*17x8 40 offset Enkei Gtc01 Hypersilver
*225 45 17 Nitto Invos
*(Track set up) Team dynamics 15x7 with m&h 24.5 x 8 slicks, m&h 3.6/24 x 15 skinnies on the rear.
*Arp extend wheel studs
*949 Racing Extended Lug Nuts
*D2 coilovers
*SPC Rear Camber Arms
*Beaks Rear Lower Tie Bar
*StopTech Street Performance Brake Pads
*StopTech Drilled & Slotted Rotors

Exterior Modifications
*HFP Front Lip
*JDM Red Emblems
*Trunk De badged
*Grfxp Red Tail Light Overlays
*Grfxp Red Chrome / Black Emblem Overlays
*Front Grill Painted Black
*10k HID Headlights
*3k HID Fogs
*Yellow Fog Light Lenses
*Yellow DRL
*LED License Plate Bulbs
*20% Tint
*Window Visors
*Clear 3rd Brake Light

Interior / I.C.E. Modifications
*Hybrid Racing Shift Knob
*Grfxp 3.5 inch Shifter Extender
*Red Stitched Shift Boot
*Auto Meter 2 Gauge Panel
*Joes Racing Switch Panel
*Red Llyod Floor Mats
*Pioneer Double Din Radio
*Pioneer Rear View Camera


http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/evans-dyno-graph-1_zpsf3c577c5.gif (http://s213.photobucket.com/user/fg2taffysi/media/Si/evans-dyno-graph-1_zpsf3c577c5.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0002_zpsb0f88ee8.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0002_zpsb0f88ee8.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0011_zps7850af47.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0011_zps7850af47.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0501_zps072e47cf.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0501_zps072e47cf.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0502_zpsf0316173.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0502_zpsf0316173.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_04941_zps12eb2cdc.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_04941_zps12eb2cdc.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0441_zpsa34fd1b4.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0441_zpsa34fd1b4.gif.html)


http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0455_zps48edc38c.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0455_zps48edc38c.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/1235462_594874143885247_216895226_n_zpsc9728f28.jp g (http://s213.photobucket.com/user/fg2taffysi/media/Si/1235462_594874143885247_216895226_n_zpsc9728f28.jp g.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/top-view-i_zps9fd486e8.gif (http://s213.photobucket.com/user/fg2taffysi/media/top-view-i_zps9fd486e8.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/d6373839-d2ae-4091-9950-5c8a2303e15a_zps72806859.jpg (http://s213.photobucket.com/user/fg2taffysi/media/d6373839-d2ae-4091-9950-5c8a2303e15a_zps72806859.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/94EF2E21-8081-42E9-8A88-5127E6964CC6_zpsabb2343b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/94EF2E21-8081-42E9-8A88-5127E6964CC6_zpsabb2343b.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0633_zps3f73c078.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0633_zps3f73c078.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0246_zpsa809834b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0246_zpsa809834b.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/1ec4e47a214411e3a9a222000aa81a0e_7_zpsb53f298d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/1ec4e47a214411e3a9a222000aa81a0e_7_zpsb53f298d.jpg .html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0139_zps350b1e8b-1.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0139_zps350b1e8b-1.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0018_zps8f572a2a-1.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0018_zps8f572a2a-1.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0222_zps7e97f052.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0222_zps7e97f052.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0223_zpsbf8ba769.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0223_zpsbf8ba769.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/Snapshot-14_zps3658c60c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/Snapshot-14_zps3658c60c.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0124_zpsd859be53-1.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0124_zpsd859be53-1.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/f8a90844-3fe0-46f6-8229-f4e591cbe7a3_zps60452456.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/f8a90844-3fe0-46f6-8229-f4e591cbe7a3_zps60452456.jpg.html)


http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/a2ce06a6-8672-45ab-871d-80058706919e_zpse25d7387.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/a2ce06a6-8672-45ab-871d-80058706919e_zpse25d7387.jpg.html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/E925DAE6-3311-4560-A299-62D7BEDB82A0-1002-000001AEBCA20572_zpsd471f36e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/E925DAE6-3311-4560-A299-62D7BEDB82A0-1002-000001AEBCA20572_zpsd471f36e.jpg.html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/48135_610390058976021_1820603186_n_zpsb10800d9.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/48135_610390058976021_1820603186_n_zpsb10800d9.jpg .html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/536222_610390948975932_3947440_n_zps0d49d099.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/536222_610390948975932_3947440_n_zps0d49d099.jpg.h tml)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/548871_610387025642991_110361077_n_zps94f4c60c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/548871_610387025642991_110361077_n_zps94f4c60c.jpg .html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/59238_610386448976382_428477662_n_zpscfa43481.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/59238_610386448976382_428477662_n_zpscfa43481.jpg. html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/555117_610390485642645_1221956283_n_zps3a468ad9.jp g (http://s213.photobucket.com/user/fg2taffysi/media/Si/555117_610390485642645_1221956283_n_zps3a468ad9.jp g.html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/AB7EF676-EA8C-4366-8EA5-534A6E231B25-1077-000000FA63CC652F_zpsc20706d6.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/AB7EF676-EA8C-4366-8EA5-534A6E231B25-1077-000000FA63CC652F_zpsc20706d6.jpg.html)
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/9C3CB9DB-9755-48AE-9E08-E246B98D6D41-1077-000000FA758504AB_zps6fd6700e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/9C3CB9DB-9755-48AE-9E08-E246B98D6D41-1077-000000FA758504AB_zps6fd6700e.jpg.html)

1SLOWFG2
07-07-2013, 02:05 PM
Looks great man, what's your best 1/4 mile time?

ksboi
07-07-2013, 06:44 PM
That does look nasty! I love that sheepy catchcan.

BoostedK20
07-07-2013, 08:25 PM
:welcome: to :boostedk20:
fg2taffysi Adm_rsx has the Sheepey CC as well. Great piece, I love it! Car looks great, and very aggressive with your track setup. Your street setup with the Enkeis looks great as well! Very clean car, nice to see that you bring her to the track. I looked into the IMT cooler, very interesting. Nice that they only do work for the CT setup and K-series motors. You should introduce them to the forums. Their cooler looks like a legit product with a lot of satisfied customers. Since you're the first person that I've seen on the forums with it, you should do both a product review and a business review!
Product review goes here: http://www.boostedk20.com/forums/forums/69-General-Supercharging
Business review goes here: http://www.boostedk20.com/forums/forums/83-Business-Reviews

Also, we'll have BoostedK20 windshield decals ready hopefully this week by @GRFXP. Would be a nice addition to your current decal setup ;)

monjarassi
07-07-2013, 08:36 PM
Love this build....

fg2taffysi
07-08-2013, 06:45 PM
:welcome: to :boostedk20:
fg2taffysi Adm_rsx has the Sheepey CC as well. Great piece, I love it! Car looks great, and very aggressive with your track setup. Your street setup with the Enkeis looks great as well! Very clean car, nice to see that you bring her to the track. I looked into the IMT cooler, very interesting. Nice that they only do work for the CT setup and K-series motors. You should introduce them to the forums. Their cooler looks like a legit product with a lot of satisfied customers. Since you're the first person that I've seen on the forums with it, you should do both a product review and a business review!
Product review goes here: http://www.boostedk20.com/forums/forums/69-General-Supercharging
Business review goes here: http://www.boostedk20.com/forums/forums/83-Business-Reviews

Also, we'll have BoostedK20 windshield decals ready hopefully this week by @GRFXP. Would be a nice addition to your current decal setup ;)

Thanks! i will add IMT under the product review for sure. they do great work and the quality is top notch! I do a lot of testing for them. they usually just have their customers post on the forum, they just stick to there facebook page and website for the most part, but i will gladly post on their behalf on the forum.

fg2taffysi
07-08-2013, 06:49 PM
Looks great man, what's your best 1/4 mile time?

only made one pass this year and that was when i had the suspension problem, that pass was 12.3 but it wasnt a full pass, im justing waiting untill i have everything setup the way i want before i head to the track again, should be in the next couple weeks, should be in the 11's somewhere i hope.

1SLOWFG2
07-08-2013, 07:24 PM
only made one pass this year and that was when i had the suspension problem, that pass was 12.3 but it wasnt a full pass, im justing waiting untill i have everything setup the way i want before i head to the track again, should be in the next couple weeks, should be in the 11's somewhere i hope.

Solid, my best was a 12.20 with a trashed hasport mount, then I melted the lines to my gate, I'm also hoping for 11's but all my passes are on BFg gforce drag radials!

Spaz
07-10-2013, 10:21 AM
love that cooler kit!

fg2taffysi
07-10-2013, 09:36 PM
Track Setup

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/9FEA4810-A8FD-43C8-97E1-580E525BAF0E-1077-000000FD7E2D7A4B_zpsda3ce2d5.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/9FEA4810-A8FD-43C8-97E1-580E525BAF0E-1077-000000FD7E2D7A4B_zpsda3ce2d5.jpg.html)

fg2taffysi
07-10-2013, 09:37 PM
New All IN FAB coil pack cover

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/423CCC28-D604-4F93-8263-1568DD5728E2-406-000000239FBEC4C1_zpsc49f5f16.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/423CCC28-D604-4F93-8263-1568DD5728E2-406-000000239FBEC4C1_zpsc49f5f16.jpg.html)

PetefromtheStreets
07-10-2013, 10:51 PM
Track Setup

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/9FEA4810-A8FD-43C8-97E1-580E525BAF0E-1077-000000FD7E2D7A4B_zpsda3ce2d5.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/9FEA4810-A8FD-43C8-97E1-580E525BAF0E-1077-000000FD7E2D7A4B_zpsda3ce2d5.jpg.html)

What skinnies are those? I want. Lol

s4 petefromthestreets

fg2taffysi
07-10-2013, 11:00 PM
What skinnies are those? I want. Lol

s4 petefromthestreets

Skinnies are summit racing drag thrust, I had them powdercoated satin black

PetefromtheStreets
07-10-2013, 11:06 PM
Skinnies are summit racing drag thrust, I had them powdercoated satin black

Gotcha Thank you. I bought their fronts for my build them weighed them and sent em back. 20lbs a piece Lol. Any idea what these weigh?

Btw the car looks sick man. Can't wait to see some track passes.


s4 IG-petefromthestreets

fg2taffysi
07-11-2013, 12:17 PM
Gotcha Thank you. I bought their fronts for my build them weighed them and sent em back. 20lbs a piece Lol. Any idea what these weigh?

Btw the car looks sick man. Can't wait to see some track passes.
not sure my enkei's weigh about 18 pounds and these are lighter so if i had to guess around 14-15 lbs range
s4 IG-petefromthestreets

not sure my enkei's weigh about 18 pounds and these are lighter so if i had to guess around 14-15 lbs range

fg2taffysi
08-03-2013, 12:24 PM
949 Racing Lug Nuts

http://i213.photobucket.com/albums/cc150/fg2taffysi/3F70B099-6E9D-4428-B6DB-59802249355B-191-000000346A203FEE_zpsea3a5dd1.jpg (http://s213.photobucket.com/user/fg2taffysi/media/3F70B099-6E9D-4428-B6DB-59802249355B-191-000000346A203FEE_zpsea3a5dd1.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/DSC_0045_zpsbcb3b80e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/DSC_0045_zpsbcb3b80e.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/99DA3D95-7A8C-4237-80D9-1B298A4C6EA1-191-00000033AB9AA48E_zps8754479e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/99DA3D95-7A8C-4237-80D9-1B298A4C6EA1-191-00000033AB9AA48E_zps8754479e.jpg.html)

fg2taffysi
08-09-2013, 11:52 AM
k tuned k20z3 upper coolant housing

http://i213.photobucket.com/albums/cc150/fg2taffysi/084F2F06-BDA6-4402-B493-D849D9BCCB19-2448-0000028A6000E43E_zps9d46433d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/084F2F06-BDA6-4402-B493-D849D9BCCB19-2448-0000028A6000E43E_zps9d46433d.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/0342CBB3-F626-42A0-AA7F-303BBD10CC23-2448-0000028918C4005A_zps48f11300.jpg (http://s213.photobucket.com/user/fg2taffysi/media/0342CBB3-F626-42A0-AA7F-303BBD10CC23-2448-0000028918C4005A_zps48f11300.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/0012F3CB-0EEC-4F0C-800D-E220EC452B8A-1077-000000FB928BEA03_zpsb6d1622d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/0012F3CB-0EEC-4F0C-800D-E220EC452B8A-1077-000000FB928BEA03_zpsb6d1622d.jpg.html)

aLmk
08-09-2013, 12:19 PM
I have seen people use this before. What is the benefit of it? It is just to get more space in that area?

fg2taffysi
08-09-2013, 01:41 PM
I have seen people use this before. What is the benefit of it? It is just to get more space in that area?

i just used it for more space in the area. but it has a block off if you want to delete your heater hoses. and is also available with -an fitting for the coolant hose if you want to go that route.

aLmk
08-09-2013, 02:20 PM
i just used it for more space in the area. but it has a block off if you want to delete your heater hoses. and is also available with -an fitting for the coolant hose if you want to go that route.
Gotcha, thanks.

ksboi
08-10-2013, 02:45 PM
Should get some good traction with those bad boys

fg2taffysi
09-24-2013, 08:55 PM
Updated

PetefromtheStreets
09-25-2013, 12:08 AM
New Charger looks great man. 355whp is great at 10lbs. Do you have pics of the air charged cooler thing?


And back to the skinnies subject...Do you know what back spacing you ordered?

s4 IG-petefromthestreets

fg2taffysi
09-25-2013, 09:16 AM
New Charger looks great man. 355whp is great at 10lbs. Do you have pics of the air charged cooler thing?


And back to the skinnies subject...Do you know what back spacing you ordered?

s4 IG-petefromthestreets

I do have pictures of the air charge cooler I will post them tonight. Also there is pictures on there website here is the link http://www.innovativemotorsportstech.com I believe the offset on the wheels is -14 I will double check tonight as we'll for you

fg2taffysi
10-12-2013, 09:32 AM
Adm_rsx

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT%20Stage%202/274f8f68c9ad4a8ffc0e41d4a95a74a4954e8293_zps0338fe bf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT%20Stage%202/274f8f68c9ad4a8ffc0e41d4a95a74a4954e8293_zps0338fe bf.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT%20Stage%202/ff2590ac06cca0c6667e877b7109dd4f3a9a8ff7_zpsaf4f03 df.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT%20Stage%202/ff2590ac06cca0c6667e877b7109dd4f3a9a8ff7_zpsaf4f03 df.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT%20Stage%202/61dda46c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT%20Stage%202/61dda46c.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT%20Stage%202/84ab84b5.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT%20Stage%202/84ab84b5.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT%20Stage%202/ed018a07.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT%20Stage%202/ed018a07.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT%20Stage%202/d6f4d00c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT%20Stage%202/d6f4d00c.jpg.html)

BoostedK20
10-13-2013, 10:31 AM
Nice update! I've never seen their kits before. Another option is on the table!

monjarassi
10-13-2013, 11:51 AM
Love sc setups with heat exchangers....

Keep it up

fg2taffysi
10-20-2013, 01:43 PM
New Video

http://i213.photobucket.com/albums/cc150/fg2taffysi/th_fallnationals2_zps4309abcf.jpg (http://i213.photobucket.com/albums/cc150/fg2taffysi/fallnationals2_zps4309abcf.mp4)

MajorWeak
10-20-2013, 03:14 PM
Nice video man. Love how clean your bay looks. keep it up!

TW FTW

monjarassi
10-20-2013, 03:43 PM
Really klean civic.

fg2taffysi
10-24-2013, 02:51 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/1235462_594874143885247_216895226_n_zpsc9728f28.jp g (http://s213.photobucket.com/user/fg2taffysi/media/Si/1235462_594874143885247_216895226_n_zpsc9728f28.jp g.html)

PetefromtheStreets
10-24-2013, 04:16 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/1235462_594874143885247_216895226_n_zpsc9728f28.jp g (http://s213.photobucket.com/user/fg2taffysi/media/Si/1235462_594874143885247_216895226_n_zpsc9728f28.jp g.html)

Sick shot dude. I hope I can make it to WCF's with my car. I wanna trave So bad. What tires do you have on your skinnies?

s4 IG-petefromthestreets
Cage plus radio member #1

monjarassi
10-24-2013, 10:36 PM
wow looks good

fg2taffysi
10-24-2013, 10:59 PM
Sick shot dude. I hope I can make it to WCF's with my car. I wanna trave So bad. What tires do you have on your skinnies?

s4 IG-petefromthestreets
Cage plus radio member #1

Skinnies are M&h Front-Runner/3.6-24.0-15 I wish I could bring my car there just won't happen this year maybe next year. I went last year just to spectate and had a blast all weekend

aLmk
10-25-2013, 09:06 AM
What gear do you burn out in?

PetefromtheStreets
10-25-2013, 09:13 AM
What gear do you burn out in?

3rd :wavey:

s4 IG-petefromthestreets
Cage plus radio member #1

Spaz
10-25-2013, 09:15 AM
I like your black/red emblem

fg2taffysi
10-25-2013, 09:55 AM
What gear do you burn out in?

I do 2nd gear burnouts, my clutch won't take a 3rd gear burnout as it has 40,000 miles on it and it's only a stage 2

fg2taffysi
10-25-2013, 09:57 AM
I like your black/red emblem

Thanks

aLmk
10-25-2013, 01:06 PM
Hmm maybe I'll try that. I've been doing mine in first and they aren't the best.

fg2taffysi
10-25-2013, 01:43 PM
Hmm maybe I'll try that. I've been doing mine in first and they aren't the best.

i usually have to pedal it in 2nd still, prob 3rd would be better once i get a better clutch

aLmk
10-25-2013, 02:42 PM
i usually have to pedal it in 2nd still, prob 3rd would be better once i get a better clutch
I don't mind pedaling it, I just always get pulled out of the box with 1st gear burnout, but I could just be doing it wrong. Do you get all 4 tires out of the water? Or just the front tires?

PetefromtheStreets
10-25-2013, 03:03 PM
i usually have to pedal it in 2nd still, prob 3rd would be better once i get a better clutch

Sure it's not the clutch slipping ? I have instant traction in every gear except a little of 1st.

s4 IG-petefromthestreets
Cage plus radio member #1

aLmk
10-25-2013, 03:13 PM
I think he means pedal it during the burnout in 2nd, but I could be mistaken. But ya for me on slicks I get perfect traction in every gear, my burnout is just meh.

PetefromtheStreets
10-25-2013, 03:16 PM
I think he means pedal it during the burnout in 2nd, but I could be mistaken. But ya for me on slicks I get perfect traction in every gear, my burnout is just meh.

Ahh gotcha. You may be right. And 3rd gear burnout in my car pulls me right out of the water box (I'm not in it but you know what I mean). And it's a good feel. You know they are sticky.

s4 IG-petefromthestreets
Cage plus radio member #1

fg2taffysi
10-25-2013, 04:52 PM
Sure it's not the clutch slipping ? I have instant traction in every gear except a little of 1st.

s4 IG-petefromthestreets
Cage plus radio member #1

i ment pedal it in the burnout other wise it just instantly bounces off the rev limiter in 2nd

PetefromtheStreets
10-25-2013, 04:55 PM
i ment pedal it in the burnout other wise it just instantly bounces off the rev limiter in 2nd

Hondata has that burnout rev limiter. I'm going to be hooking that up for WCF's I think.

s4 IG-petefromthestreets
Cage plus radio member #1

aLmk
10-25-2013, 05:08 PM
Hondata has that burnout rev limiter. I'm going to be hooking that up for WCF's I think.

s4 IG-petefromthestreets
Cage plus radio member #1
I don't think flashpro supports that :think:

PetefromtheStreets
10-25-2013, 05:13 PM
I don't think flashpro supports that :think:

Go to parameters and then rev limits see if you have the option.

s4 IG-petefromthestreets
Cage plus radio member #1

aLmk
10-25-2013, 05:16 PM
We don't, just the rev limit for moving, and the two step for launching.

fg2taffysi
10-26-2013, 12:21 PM
We don't, just the rev limit for moving, and the two step for launching.

of course not lol

boosted_teg
10-26-2013, 10:51 PM
what would you put the burnout revlimit at?

PetefromtheStreets
10-26-2013, 10:53 PM
what would you put the burnout revlimit at?


I'd your rev limit is at 8600 I'd make it 7kish. No real reason for the numbers I picked it's just less harsh on the motor then at 8600 hitting limiter

s4 IG-petefromthestreets
Cage plus radio member #1

vdubkilla
10-27-2013, 09:58 AM
I had mine set at 6500 rpms I just had to try different rpms til I found that right spot

fg2taffysi
10-27-2013, 10:39 AM
I really wish flash pro had this option :(

fg2taffysi
11-05-2013, 09:03 PM
Custom one off overflow made for me by Speed factory race fabrication http://i213.photobucket.com/albums/cc150/fg2taffysi/28972A0C-BAE7-4FEB-9F79-80692C7C0CEF-760-000000E7F654CD84_zps117b909f.jpghttp://i213.photobucket.com/albums/cc150/fg2taffysi/260BA85D-930E-485B-A3E7-1B16BBB9DF5D-760-000000E8020F4E57_zps095bfc3e.jpg http://i213.photobucket.com/albums/cc150/fg2taffysi/1ABC11FA-4904-4887-9949-48A63636A24B-760-000000E81F304871_zpsbafe0ffc.jpg http://i213.photobucket.com/albums/cc150/fg2taffysi/B5AEAA18-B553-4A7A-8480-6DA4F011DCAC-760-000000E8156E3DF0_zps6b029dee.jpg http://i213.photobucket.com/albums/cc150/fg2taffysi/58168553-6401-4AB0-9E96-99204910CE79-760-000000E80C507D5E_zps0e95392a.jpg

monjarassi
11-05-2013, 11:33 PM
Where will u be mounting this??

fg2taffysi
11-06-2013, 10:06 AM
Where will u be mounting this??

I will be mounted in the same place as the oem one is now. The oem one is mounted to the pwjdm battery relocation bracket. In front I the intake

BoostedK20
11-07-2013, 02:27 AM
I really wish flash pro had this option :(

:goodpost: Hondata

aLmk
11-07-2013, 11:46 AM
:goodpost: Hondata
They too busy with rdx flashpro :giggle:

PetefromtheStreets
11-07-2013, 11:50 AM
They have 0 posts and joined in 2011. I'm going to get aem just because now

s4 IG-petefromthestreets
Cage plus radio member #1

Si Speed 317
11-07-2013, 11:57 AM
They have 0 posts and joined in 2011. I'm going to get aem just because now

s4 IG-petefromthestreets
Cage plus radio member #1
Hondata that's what happens when you don't support the community! I saw BoostedK20 chatting with them at the last Honda Day in their booth. Guess they didn't want to be a part of it :shrug:

PetefromtheStreets
11-07-2013, 12:05 PM
Hondata that's what happens when you don't support the community! I saw BoostedK20 chatting with them at the last Honda Day in their booth. Guess they didn't want to be a part of it :shrug:

Also I just hear people make more power on aem. I keep hearing it's something about more control over injector pulse widths or something along those lines. Maybe that's something aem can do for us ppl who wanna more from their software and don't want to switch to another manufacturers ecu...

s4 IG-petefromthestreets
Cage plus radio member #1

aLmk
11-07-2013, 12:48 PM
I think it's always been that the AEM has more features, but because of this it is more complicated to tune. I think you literally have to build the tune from complete scratch since it is a standalone ecu, it isn't just fucking with the stock ecu. I could be mistaken though.

fg2taffysi
11-07-2013, 01:01 PM
They too busy with rdx flashpro :giggle:

I laughed when I first found out they have been busy working on flash pro for the rdx

PetefromtheStreets
11-07-2013, 01:04 PM
I think it's always been that the AEM has more features, but because of this it is more complicated to tune. I think you literally have to build the tune from complete scratch since it is a standalone ecu, it isn't just fucking with the stock ecu. I could be mistaken though.

I can build my own tune that's not a problem. I just prefer to have it pass emissions. It's also live updating. If you move something it literally happens then... No paying upload ect.

Sorry for thread jacking. We'll carry this on in the chat

s4 IG-petefromthestreets
Cage plus radio member #1

fg2taffysi
11-07-2013, 05:27 PM
I can build my own tune that's not a problem. I just prefer to have it pass emissions. It's also live updating. If you move something it literally happens then... No paying upload ect.

Sorry for thread jacking. We'll carry this on in the chat

s4 IG-petefromthestreets
Cage plus radio member #1

No worry on the thread jacking, I don't mind at all

fg2taffysi
11-08-2013, 10:24 AM
Speedfactory fabrication coolant over flow installed

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0387_zps269280e9.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0387_zps269280e9.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0385_zps9e95861a.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0385_zps9e95861a.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/9c430160-6b52-4943-8fd9-93e33f4ca7f0_zps43c49d7e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/9c430160-6b52-4943-8fd9-93e33f4ca7f0_zps43c49d7e.jpg.html)

Si Speed 317
11-09-2013, 02:52 AM
Looks awesome! How does it mount?

fg2taffysi
11-09-2013, 05:23 PM
Looks awesome! How does it mount?

I modified the password jdm battery relocation mount that holds the battery down to remove the oem overflow mount and I just used one of the bolts for the upper radiator support. I replaced the oem bolt with a longer downstar bolt and washer http://i213.photobucket.com/albums/cc150/fg2taffysi/03891659-43C6-4377-9003-CE3A0E484A63-945-00000134C1325E3A_zpsff582521.jpg http://i213.photobucket.com/albums/cc150/fg2taffysi/D01569D0-404A-41EC-AF03-AABE46EA6DFD-1150-000001624289042C_zps39c64a64.jpg

fg2taffysi
12-29-2013, 05:19 PM
Speed Factory Race Fabrication - Polished Coil Pack Cover With Downstar V.3 Black Washers & Bolts

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/997B7859-356A-4B9A-B935-F9AD1523132E-6682-000005D552531989_zpsac546f4a.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/997B7859-356A-4B9A-B935-F9AD1523132E-6682-000005D552531989_zpsac546f4a.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/439CDF72-4B55-46CC-BE95-19578E7F51EE-6682-000005D548762A49_zps2ed2a95c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/439CDF72-4B55-46CC-BE95-19578E7F51EE-6682-000005D548762A49_zps2ed2a95c.jpg.html)

Si Speed 317
01-23-2014, 09:16 AM
Love it, looks great!!

fg2taffysi
01-24-2014, 10:37 AM
Love it, looks great!!

Thanks! I have a lot of plans to clean up the bay this winter

PetefromtheStreets
01-24-2014, 11:28 AM
Agreed it looks great!

s4 IG-petefromthestreets
Cage plus radio member #1

fg2taffysi
01-31-2014, 02:52 PM
Dyno Graph from this past summer on a very Hot & Humid day @ Evans Tuning

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/evans-dyno-graph-1_zpsf3c577c5.gif (http://s213.photobucket.com/user/fg2taffysi/media/Si/evans-dyno-graph-1_zpsf3c577c5.gif.html)

Si Speed 317
02-01-2014, 02:24 AM
Those are nice numbers man! Blower boys are making more and more power! I love it.

fg2taffysi
02-07-2014, 12:46 PM
Oem bolts replaced with downstar V.3 Hardware

Radiator Fill Neck
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/D3D39357-746E-4A40-B3D8-6458D23492ED_zpsszabqth6.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/D3D39357-746E-4A40-B3D8-6458D23492ED_zpsszabqth6.jpg.html)

Fender Bolts
http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/77CC2A50-5D2A-4FE4-8495-9EFB2B420048_zpsmlkw7fr3.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/77CC2A50-5D2A-4FE4-8495-9EFB2B420048_zpsmlkw7fr3.jpg.html)

fg2taffysi
02-07-2014, 12:48 PM
Hybrid Racing Slim Oil Cap

http://i213.photobucket.com/albums/cc150/fg2taffysi/Si/photo3_zpsa63b819f.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Si/photo3_zpsa63b819f.jpg.html)

fg2taffysi
02-22-2014, 10:27 AM
New Hybrid Racing V2 Shift Knob, White Delrin With Polished Insert

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0483_zps403e75cb.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0483_zps403e75cb.jpg.html)

fg2taffysi
02-22-2014, 10:29 AM
Skunk2 Certified

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0524_zps3956838b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0524_zps3956838b.jpg.html)

fg2taffysi
02-23-2014, 02:49 PM
Switch Panel With Custom Made Mounting Brackets

Joes Racing 4 acc, w-lights switch panel
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0480_zpse2e9e66d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0480_zpse2e9e66d.jpg.html)

Custom made side brackets to fill in the sides on the console pocket
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0531_zps45422352.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0531_zps45422352.jpg.html)

Back view of mounting brackets where it will get secured to the console
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0529_zps108d14ae.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0529_zps108d14ae.jpg.html)

Installed in the console
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0550_zps93f2f1d8.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0550_zps93f2f1d8.jpg.html)

Console installed in the car
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0556_zpsa92952b5.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0556_zpsa92952b5.jpg.html)

fg2taffysi
02-23-2014, 03:02 PM
Hybrid Racing v2 performance shift knob

Installed
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0633_zps3f73c078.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0633_zps3f73c078.jpg.html)

monjarassi
02-23-2014, 03:03 PM
Dat switch panel dope..

aLmk
02-23-2014, 03:30 PM
Looking nice! What kind of switches are you going to put there?

PetefromtheStreets
02-23-2014, 03:32 PM
Looks great. What are you using the switches for?

s4 IG-petefromthestreets
Cage plus radio member #1

Si Speed 317
02-23-2014, 03:35 PM
Looks awesome! Great updates man, keep em coming

fg2taffysi
02-23-2014, 06:45 PM
Looking nice! What kind of switches are you going to put there?

One switch will be for the aftercooler pump, another switch will be for two fans for the heat exchanger and a switch for the radio.

fg2taffysi
02-23-2014, 06:47 PM
Looks great. What are you using the switches for?

s4 IG-petefromthestreets
Cage plus radio member #1

Thanks! See the post ^ for what switches

fg2taffysi
02-23-2014, 06:49 PM
Looks awesome! Great updates man, keep em coming

Thanks man! I got so more updates coming soon don't worry !

fg2taffysi
03-01-2014, 11:32 PM
Downstar Motor Mount Bolts With Black Beauty Washers

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo55256_zpsd0cc3e41.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo55256_zpsd0cc3e41.jpg.html)

Oem Dog Bone Bolt
http://i213.photobucket.com/albums/cc150/fg2taffysi/photo165_zps835c4a6d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo165_zps835c4a6d.jpg.html)
Downstar Dog Bone Bolt With Black Beauty Washer

PetefromtheStreets
03-02-2014, 12:41 AM
Downstar Motor Mount Bolts With Black Beauty Washers

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo55256_zpsd0cc3e41.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo55256_zpsd0cc3e41.jpg.html)

Oem Dog Bone Bolt
http://i213.photobucket.com/albums/cc150/fg2taffysi/photo165_zps835c4a6d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo165_zps835c4a6d.jpg.html)
Downstar Dog Bone Bolt With Black Beauty Washer

Very nice touch. If I wasn't so worried about not having the right size Allen head socket I'd get some myself.

s4 IG-petefromthestreets
Cage plus radio member #1

fg2taffysi
03-03-2014, 10:48 PM
Very nice touch. If I wasn't so worried about not having the right size Allen head socket I'd get some myself.

s4 IG-petefromthestreets
Cage plus radio member #1

thanks these are 10mm allen head socket if that helps lol

fg2taffysi
03-03-2014, 10:49 PM
Polished the dog bone motor mount ready to re install with the new Downstar hardware

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0723_zpsced6ae4e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0723_zpsced6ae4e.jpg.html)

PetefromtheStreets
03-06-2014, 12:37 AM
Polished the dog bone motor mount ready to re install with the new Downstar hardware

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0723_zpsced6ae4e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0723_zpsced6ae4e.jpg.html)

Damn, that looks good. Keep it up.

s4 IG-petefromthestreets
Cage plus radio member #1

fg2taffysi
03-10-2014, 08:02 PM
Wire - Worx custom labeled engine harness

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0774_zps22d763fb.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0774_zps22d763fb.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0771_zpsb1a2be1e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0771_zpsb1a2be1e.jpg.html)

PetefromtheStreets
03-10-2014, 08:18 PM
Very nice

s4 IG-petefromthestreets
Cage plus radio member #1

Spaz
03-11-2014, 11:03 AM
heard nothing but good about the wire-worx harnessess

Si Speed 317
03-14-2014, 05:10 PM
Woot!

fg2taffysi
03-28-2014, 04:07 PM
Passenger side motor mounts powder coated with Downstar Hardware with black beauty washers

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0795_zpsefbbfe40.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0795_zpsefbbfe40.jpg.html)

fg2taffysi
03-28-2014, 04:14 PM
Trac Tuff rbc / rbb water bypass adapter with Downstar hardware with black beauty washers

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0804_zpsd01d4bc6.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0804_zpsd01d4bc6.jpg.html)

fg2taffysi
03-28-2014, 04:17 PM
Ct-engineering pulley idler plate with Downstar hardware with black beauty washers

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0801_zps3d83a5f2.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0801_zps3d83a5f2.jpg.html)

fg2taffysi
04-05-2014, 11:31 AM
Motor Mounts Installed
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0809_zpse79cb5ee.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0809_zpse79cb5ee.jpg.html)

fg2taffysi
04-14-2014, 09:59 PM
Valve cover powder coated black chrome with -an fitting welded onhttp://i213.photobucket.com/albums/cc150/fg2taffysi/6EAB6F85-A886-440D-B5CE-B739276984B8_zps802bqqz5.gif (http://s213.photobucket.com/user/fg2taffysi/media/6EAB6F85-A886-440D-B5CE-B739276984B8_zps802bqqz5.gif.html)

PetefromtheStreets
04-14-2014, 10:28 PM
That looks great :thumb:


Sent from my stupid iPhone using Tapatalk

stigrl06
04-14-2014, 10:35 PM
sexy spc

monjarassi
04-15-2014, 12:06 AM
digging the vc setup

Si Speed 317
04-15-2014, 03:57 PM
Nice!!

02civic629
04-15-2014, 10:50 PM
Love the color of the valve cover

Spaz
04-16-2014, 10:17 AM
wow yeah love the valve cover!

fg2taffysi
04-19-2014, 10:02 PM
Valve cover and wire worx tucked harness installed

http://i213.photobucket.com/albums/cc150/fg2taffysi/94EF2E21-8081-42E9-8A88-5127E6964CC6_zpsabb2343b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/94EF2E21-8081-42E9-8A88-5127E6964CC6_zpsabb2343b.jpg.html)

stigrl06
04-19-2014, 10:05 PM
those inj clips look good

fg2taffysi
04-22-2014, 07:26 PM
Trac Tuff water by pass adapter installed
http://i213.photobucket.com/albums/cc150/fg2taffysi/photo_zps19bf9cca.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo_zps19bf9cca.jpg.html)

fg2taffysi
04-22-2014, 07:27 PM
those inj clips look good

thanks!

fg2taffysi
04-22-2014, 07:28 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/top-view-i_zps9fd486e8.gif (http://s213.photobucket.com/user/fg2taffysi/media/top-view-i_zps9fd486e8.gif.html)

aLmk
04-22-2014, 08:34 PM
Looking very clean!

monjarassi
04-22-2014, 09:34 PM
i might just get that tractuff thing for mine now

02civic629
04-22-2014, 10:26 PM
This thing is just so perfectly clean.......

Si Speed 317
04-23-2014, 11:19 AM
Whipple!

fg2taffysi
05-19-2014, 10:19 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/ccbb9734-b544-47fd-8a95-ada5a12df5bd_zps729874d4.jpg (http://s213.photobucket.com/user/fg2taffysi/media/ccbb9734-b544-47fd-8a95-ada5a12df5bd_zps729874d4.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0812_zps655ef585.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0812_zps655ef585.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0972_zps228e3f44.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0972_zps228e3f44.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/2c25da88-2001-47aa-99f8-dc3c62c6aa20_zpsc65201bf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/2c25da88-2001-47aa-99f8-dc3c62c6aa20_zpsc65201bf.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/fd32ce8d-276f-4483-9c5a-1e2e64dc7293_zps4024f83d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/fd32ce8d-276f-4483-9c5a-1e2e64dc7293_zps4024f83d.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/4e130cb6-32e7-4b3a-b7a2-73b6b4312b61_zpsbe6a2104.jpg (http://s213.photobucket.com/user/fg2taffysi/media/4e130cb6-32e7-4b3a-b7a2-73b6b4312b61_zpsbe6a2104.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/d6373839-d2ae-4091-9950-5c8a2303e15a_zps72806859.jpg (http://s213.photobucket.com/user/fg2taffysi/media/d6373839-d2ae-4091-9950-5c8a2303e15a_zps72806859.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0246_zpsa809834b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0246_zpsa809834b.jpg.html)

monjarassi
05-19-2014, 10:46 PM
Sexy fg2

PetefromtheStreets
05-19-2014, 10:52 PM
Looks sick man. I was going to mount mt sheepey can in the same spot

Sent from my SAMSUNG-SM-G900A using Tapatalk

fg2taffysi
05-20-2014, 09:53 PM
Looks sick man. I was going to mount mt sheepey can in the same spot

Sent from my SAMSUNG-SM-G900A using Tapatalk

Thanks pretty much the only spot it would fit lol

fg2taffysi
05-22-2014, 07:41 AM
Belak Industries Wheels

http://i213.photobucket.com/albums/cc150/fg2taffysi/5DA6E215-2198-4DAD-B570-AFEE8531C197_zpsvr7sjkhh.jpg (http://s213.photobucket.com/user/fg2taffysi/media/5DA6E215-2198-4DAD-B570-AFEE8531C197_zpsvr7sjkhh.jpg.html)

fg2taffysi
05-22-2014, 10:32 PM
up grading to Wire-Worx ground wires

http://i213.photobucket.com/albums/cc150/fg2taffysi/698845AB-BC20-4E3A-BE16-99D96AA49059_zps4ckq7evl.jpg (http://s213.photobucket.com/user/fg2taffysi/media/698845AB-BC20-4E3A-BE16-99D96AA49059_zps4ckq7evl.jpg.html)

fg2taffysi
05-22-2014, 10:36 PM
Another sick photo of the car from the Sauce Spot

http://i213.photobucket.com/albums/cc150/fg2taffysi/1546032_628926560480005_1639798009_n_zps08d36924.j pg (http://s213.photobucket.com/user/fg2taffysi/media/1546032_628926560480005_1639798009_n_zps08d36924.j pg.html)

fg2taffysi
05-27-2014, 03:15 PM
Belak Industries Wheels with 24.5 x 8.5 x 15 m&h tires

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0441_zpsa34fd1b4.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0441_zpsa34fd1b4.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0455_zps48edc38c.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0455_zps48edc38c.gif.html)

fg2taffysi
05-27-2014, 03:23 PM
Speedfactory Tuning & Race Fabrication Polished Intake

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0501_zps072e47cf.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0501_zps072e47cf.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0502_zpsf0316173.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0502_zpsf0316173.gif.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_04941_zps12eb2cdc.gif (http://s213.photobucket.com/user/fg2taffysi/media/DSC_04941_zps12eb2cdc.gif.html)

stigrl06
05-27-2014, 07:02 PM
wow looks great

PetefromtheStreets
05-28-2014, 12:54 AM
Cars coming along great man. New slick setup is Ballin

Sent from my SAMSUNG-SM-G900A using Tapatalk

02civic629
05-28-2014, 08:15 AM
Engine bay is sooooo clean

Si Speed 317
05-28-2014, 08:28 AM
Beautiful!! How much of a difference did that intake make over your last one?

Spaz
05-28-2014, 12:52 PM
sickest 8th gen hands down.... so jelly

fg2taffysi
05-28-2014, 08:41 PM
wow looks great

Thanks!

fg2taffysi
05-28-2014, 08:42 PM
Cars coming along great man. New slick setup is Ballin

Sent from my SAMSUNG-SM-G900A using Tapatalk

Thanks man!

fg2taffysi
05-28-2014, 08:44 PM
Engine bay is sooooo clean

Thanks I have a few more things to delete / move to clean it up alittle more

fg2taffysi
05-28-2014, 08:48 PM
Beautiful!! How much of a difference did that intake make over your last one?

Thanks! not sure on the difference in the intakes there both the same size this one has a different bend tho and dosnt have maf or iat or hose ports for breather hose etc

monjarassi
05-28-2014, 09:33 PM
omg that bay looks so sick, im jelly

fg2taffysi
06-06-2014, 02:14 PM
New Hybrid Racing Performance Radiator Cap

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo1_zpscacea4ec.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo1_zpscacea4ec.jpg.html)

fg2taffysi
06-06-2014, 02:15 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0529_zpsa2ab3a04.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0529_zpsa2ab3a04.jpg.html)

fg2taffysi
06-07-2014, 05:14 PM
upgrading all the coolant hose clamps to Hybrid Racing T-BOLT CLAMPS

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0609_zps2d517840.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0609_zps2d517840.jpg.html)

Si Speed 317
06-09-2014, 09:10 AM
Thats the way to do it! T-bolts are no joke

fg2taffysi
06-13-2014, 03:19 PM
PCI adjustable seat brackets

https://farm4.staticflickr.com/3891/14414367875_225bab6bdf_s.jpg (https://flic.kr/p/nXKpo4)PCI seat bracket 2 (https://flic.kr/p/nXKpo4) by markfg2taffysi (https://www.flickr.com/people//), on Flickr

https://farm4.staticflickr.com/3891/14414367875_225bab6bdf_s.jpg (https://flic.kr/p/nXKpo4)PCI seat bracket 2 (https://flic.kr/p/nXKpo4) by markfg2taffysi (https://www.flickr.com/people//), on Flickr

02civic629
06-14-2014, 12:56 AM
:fyea:

fg2taffysi
06-30-2014, 07:27 PM
AC Deleted

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0694_zpsfa8c47e3.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0694_zpsfa8c47e3.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0687_zps82181e1c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0687_zps82181e1c.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0688_zpsaf1cb547.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0688_zpsaf1cb547.jpg.html)

fg2taffysi
06-30-2014, 07:33 PM
Made a ac firewall delete out of aluminum with a gasket

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo9_zpsecb027e0.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo9_zpsecb027e0.jpg.html)

monjarassi
06-30-2014, 08:10 PM
just removed the ac lines or the whole deal

fg2taffysi
06-30-2014, 09:00 PM
just removed the ac lines or the whole deal

Every thing is removed, the compressor is still there for the moment until I find the right size belt then that will be eliminated as well

fg2taffysi
07-16-2014, 10:08 AM
Windshield Wiper Delete block off plate for cowl

http://i213.photobucket.com/albums/cc150/fg2taffysi/a3d9265d-cda8-4039-a887-7c9d7144ecde_zpsdf5cc180.png (http://s213.photobucket.com/user/fg2taffysi/media/a3d9265d-cda8-4039-a887-7c9d7144ecde_zpsdf5cc180.png.html)

fg2taffysi
07-21-2014, 07:50 PM
Windshield Wiper Cowl Delete Installed

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo11_zps8a6927d5.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo11_zps8a6927d5.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo12_zpsea42cab2.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo12_zpsea42cab2.jpg.html)

fg2taffysi
07-21-2014, 07:54 PM
IMT HIGH SPEED IDLER PULLEY

http://i213.photobucket.com/albums/cc150/fg2taffysi/photo10_zps99245a85.jpg (http://s213.photobucket.com/user/fg2taffysi/media/photo10_zps99245a85.jpg.html)

I had a ct-e idler explode on me before!

I Highly suggest to upgrade to the IMT ONE!

Direct replacement for CT ENGINEERING 50MM ALUMINUM IDLER PULLEY &
JACKSON RACING/MOSS MOTORS PLASTIC MOLDED 2" DIAMETER IDLER PULLEY

fg2taffysi
07-21-2014, 08:04 PM
IMT Fuel Rail Hold Downs

http://i213.photobucket.com/albums/cc150/fg2taffysi/b4274d5d-97d6-4ec5-868d-bb4b76ebd734_zps076ad5a8.png (http://s213.photobucket.com/user/fg2taffysi/media/b4274d5d-97d6-4ec5-868d-bb4b76ebd734_zps076ad5a8.png.html)

02civic629
07-21-2014, 08:57 PM
I need those bolts lol

monjarassi
07-21-2014, 10:57 PM
sweet stuff here

fg2taffysi
07-21-2014, 11:09 PM
I need those bolts lol

If your interested in them you can inquiry about them by sending them a email at info@innovativemotorsportstech.com

fg2taffysi
08-02-2014, 11:14 AM
IMT Idler pulley installed and IMT fuel rail hold downs installed

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0152_zpsd7094a3c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0152_zpsd7094a3c.jpg.html)

monjarassi
08-02-2014, 11:15 AM
So close to the motor mount

fg2taffysi
08-02-2014, 11:20 AM
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0163_zpsdd152c52.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0163_zpsdd152c52.jpg.html)

fg2taffysi
08-02-2014, 11:24 AM
Belak Industries rear drag wheels

http://i213.photobucket.com/albums/cc150/fg2taffysi/5ba654fc-9b26-434d-95a7-b24fb23d3b70_zpsf647190b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/5ba654fc-9b26-434d-95a7-b24fb23d3b70_zpsf647190b.jpg.html)

fg2taffysi
08-02-2014, 11:26 AM
http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0085_zps3ce7f173.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0085_zps3ce7f173.jpg.html)

Turbo24
08-17-2014, 01:41 AM
Wow!

BoostedK20
08-27-2014, 07:56 PM
Aggressive! How is she running?

fg2taffysi
08-30-2014, 05:03 PM
Aggressive! How is she running?

we had issues with 1-2 @honda day tranny is coming out this week got some upgrades for it, car will be ready for the 11.50 index shootout at fall nationals

fg2taffysi
08-31-2014, 01:22 PM
Honda Day Hondata Si Shootout

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/e14a4f6a-5e04-451a-a958-2a9fe25c91b1_zpsbd717892.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/e14a4f6a-5e04-451a-a958-2a9fe25c91b1_zpsbd717892.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0034_zpsf1996877.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0034_zpsf1996877.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0058_zpsf4ca3094.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0058_zpsf4ca3094.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0027_zps4ceba947.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0027_zps4ceba947.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0023_zps0337309c.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0023_zps0337309c.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0055_zpscaca3349.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0055_zpscaca3349.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0024_zps5df11b89.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0024_zps5df11b89.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0019_zpsc2766339.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0019_zpsc2766339.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/Honda%20Day%202014/DSC_0017_zps672349d7.jpg (http://s213.photobucket.com/user/fg2taffysi/media/Honda%20Day%202014/DSC_0017_zps672349d7.jpg.html)

monjarassi
08-31-2014, 03:48 PM
damn she looks so naughty

PetefromtheStreets
09-01-2014, 09:49 PM
Yea she does. Hope to see you at fall nationals

Spaz
09-02-2014, 09:48 AM
yeah I need a track wheel combo like that!

fg2taffysi
11-01-2014, 10:23 PM
Energy Suspension now offers a complete front lower control arm bushing set for the 2006+ civic si

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_132019_zps02001a23.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_132019_zps02001a23.jpg.html)

Part Number: 16.3122

Fits:

Honda Civic Si 2006
Honda Civic Si 2007
Honda Civic Si 2008
Honda Civic Si 2009
Honda Civic Si 2010
Honda Civic Si 2011

Energy Suspension makes parts in 2 colors. Red and Black

How are these two colors different?

The only difference between the red and black parts is that most Black Energy Suspension parts are Graphite Impregnated. This serves to help self lubricate the bushings. The Red parts do not have this characteristic. Aside from the actual color and the lack of being Graphite Impregnated - the red parts are essentially the same as the black.

Purchase here: Energy Suspension 16.3122 Front Control Arm Bushings Made by Energy Suspension (http://www.energysuspensionparts.com/proddetail.asp?prod=16.3122#reviews)

Before you had to purchase a rsx kit and where only able to use 2 of the 4 bushings.

I was one of the first to purchase and install these here are some pictures of the bushings and bushings installed.

Here are pictures of the OEM Bushings

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_133258_zpsc7bf510d.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_133258_zpsc7bf510d.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_133302_zps224acb1e.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_133302_zps224acb1e.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_133254_zps4eaeffb4.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_133254_zps4eaeffb4.jpg.html)

Here are the Energy Suspension Bushings

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_131928_zpsd7f5b122.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_131928_zpsd7f5b122.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/00a24dc5-9603-4d81-b083-846e6cdb3ef9_zpsbeba15c8.jpg (http://s213.photobucket.com/user/fg2taffysi/media/00a24dc5-9603-4d81-b083-846e6cdb3ef9_zpsbeba15c8.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_154756_resized_zps7b83e7cf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_154756_resized_zps7b83e7cf.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_154800_resized_zps9da81462.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_154800_resized_zps9da81462.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20140912_154803_resized_zps43ecf0fc.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20140912_154803_resized_zps43ecf0fc.jpg.html)

fg2taffysi
11-01-2014, 10:29 PM
Picked up Mtec race shift springs from afhkparts. Swapped out the springs and then reassembled the shift change assembly with downstar hardware.

Purchase here:
Mtec K Series Race Shifter Spring - AFH Parts (http://afhkparts.com/shop/mtec-industries/mtec-k-series-race-shifter-spring/)

http://i213.photobucket.com/albums/cc150/fg2taffysi/InstaSize_2014_10___111676_zps9faf3480.jpg (http://s213.photobucket.com/user/fg2taffysi/media/InstaSize_2014_10___111676_zps9faf3480.jpg.html)

fg2taffysi
11-01-2014, 10:46 PM
Nice Picture Hondata took of the car at Honda Day

http://i213.photobucket.com/albums/cc150/fg2taffysi/10500252_10152218933881863_6093646031010122984_n_z ps3aa52fcb.jpg (http://s213.photobucket.com/user/fg2taffysi/media/10500252_10152218933881863_6093646031010122984_n_z ps3aa52fcb.jpg.html)

djtooon
11-03-2014, 12:38 AM
Car looks amazing !!

fg2taffysi
11-03-2014, 08:14 PM
Car looks amazing !!

Thanks!

PetefromtheStreets
11-03-2014, 11:36 PM
You ever sell the skinnies?

fg2taffysi
11-05-2014, 08:21 PM
You ever sell the skinnies?

yea sold them over the summer

builtfa5ftw
12-25-2014, 01:37 AM
nice build, car looks great.

fg2taffysi
01-11-2015, 02:58 PM
nice build, car looks great.

thanks man!

fg2taffysi
01-11-2015, 02:58 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/99fb4b32-eaa0-442e-9e51-2e4fbfd32126_zps086ea3f9.jpg (http://s213.photobucket.com/user/fg2taffysi/media/99fb4b32-eaa0-442e-9e51-2e4fbfd32126_zps086ea3f9.jpg.html)

Si Speed 317
01-11-2015, 04:51 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/99fb4b32-eaa0-442e-9e51-2e4fbfd32126_zps086ea3f9.jpg (http://s213.photobucket.com/user/fg2taffysi/media/99fb4b32-eaa0-442e-9e51-2e4fbfd32126_zps086ea3f9.jpg.html)

Beautiful! I love the grfxp taillight overlays, I've had em on my Si since they first came out. Such a dope look!

fg2taffysi
01-12-2015, 07:26 PM
Beautiful! I love the grfxp taillight overlays, I've had em on my Si since they first came out. Such a dope look!

thanks! the over lays make a big difference i love them they even held up great after many years

fg2taffysi
01-12-2015, 07:36 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/2defc6be-dfc8-470a-b401-9b6f78066e6d_zps5d0b531f.jpg (http://s213.photobucket.com/user/fg2taffysi/media/2defc6be-dfc8-470a-b401-9b6f78066e6d_zps5d0b531f.jpg.html)

fg2taffysi
01-13-2015, 07:51 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/d41ce23e-a13f-4b7e-b451-fca041e495cb_zps2a365fac.jpg (http://s213.photobucket.com/user/fg2taffysi/media/d41ce23e-a13f-4b7e-b451-fca041e495cb_zps2a365fac.jpg.html)

builtfa5ftw
01-13-2015, 09:47 PM
Looks good man

Spaz
01-23-2015, 10:59 AM
now those are some sick fat and skinnies!! Nice setup!

Si Speed 317
01-23-2015, 04:55 PM
Love it love it love it!

Sent from my SM-G900T using Tapatalk

fg2taffysi
03-26-2015, 11:23 AM
Tested The New IMT Eaton Tvs 1320 Supercharger Upgrade

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT/10649684_613835012049530_1792372969832352422_n_zps eaku34jo.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT/10649684_613835012049530_1792372969832352422_n_zps eaku34jo.jpg.html)

fg2taffysi
03-26-2015, 01:30 PM
Tvs 1320 Dyno Graph

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT/Evans-Tuning-TVS-1320-3.4-Blower-Pulley-7_zpsakhh5oad.gif (http://s213.photobucket.com/user/fg2taffysi/media/IMT/Evans-Tuning-TVS-1320-3.4-Blower-Pulley-7_zpsakhh5oad.gif.html)

fg2taffysi
03-26-2015, 01:30 PM
On The Dyno At Evans Tuning

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMT/IMT%20dyno%20testing%20front%20view5%20copy_zpsaid 4pt9t.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMT/IMT%20dyno%20testing%20front%20view5%20copy_zpsaid 4pt9t.jpg.html)

BoostedK20
04-04-2015, 09:16 AM
Awesome!

fg2taffysi
05-27-2015, 10:37 PM
check out the speedhunters.com feature article at http://www.speedhunters.com/2015/04/iamthespeedhunter-your-supercharged-rides/

#IAMTHESPEEDHUNTER Your Supercharged Rides - Speedhunters (http://www.speedhunters.com/2015/04/iamthespeedhunter-your-supercharged-rides/)

http://i213.photobucket.com/albums/cc150/fg2taffysi/InstaSize_2015_4%20_%20136771_zpsvyl4vaay.jpg (http://s213.photobucket.com/user/fg2taffysi/media/InstaSize_2015_4%20_%20136771_zpsvyl4vaay.jpg.html )

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150517_114142_zpsmqwlvgjx.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150517_114142_zpsmqwlvgjx.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/89ff3aec-e64a-4ce0-9a58-aac8baf3fad5_zps9wngm1rr.png (http://s213.photobucket.com/user/fg2taffysi/media/89ff3aec-e64a-4ce0-9a58-aac8baf3fad5_zps9wngm1rr.png.html)

fg2taffysi
05-27-2015, 11:07 PM
Modified IMT inlet for -6an fittings and hose

http://i213.photobucket.com/albums/cc150/fg2taffysi/InstaSize_2015_3%20_%2089650_zpsfwdpiz9b.jpg (http://s213.photobucket.com/user/fg2taffysi/media/InstaSize_2015_3%20_%2089650_zpsfwdpiz9b.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/InstaSize_2015_3%20_%208950_zpseipqhijd.jpg (http://s213.photobucket.com/user/fg2taffysi/media/InstaSize_2015_3%20_%208950_zpseipqhijd.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150514_125145_zpsn7lfv0vp.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150514_125145_zpsn7lfv0vp.jpg.html)

fg2taffysi
05-27-2015, 11:18 PM
Speed factory racing catch can

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150421_214907_zpsk0jaxl0s.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150421_214907_zpsk0jaxl0s.jpg.html)

To mount the catch can i made a custom bracket and polished it

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150421_213403_zpscalkoqjf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150421_213403_zpscalkoqjf.jpg.html)

Catch Can Installed

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150516_072039_zpsd2mfhdxy.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150516_072039_zpsd2mfhdxy.jpg.html)

fg2taffysi
05-27-2015, 11:19 PM
-4an fittings and hose on the speed factory racing coolant overflow

http://i213.photobucket.com/albums/cc150/fg2taffysi/bf905543-efff-449d-994e-87883b393813_zpsqchiipt8.jpg (http://s213.photobucket.com/user/fg2taffysi/media/bf905543-efff-449d-994e-87883b393813_zpsqchiipt8.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20150523_122056_zpsjhlys4sm.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20150523_122056_zpsjhlys4sm.jpg.html)

PetefromtheStreets
05-27-2015, 11:20 PM
Speed factory racing catch can

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150421_214907_zpsk0jaxl0s.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150421_214907_zpsk0jaxl0s.jpg.html)

To mount the catch can i made a custom bracket and polished it

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150421_213403_zpscalkoqjf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150421_213403_zpscalkoqjf.jpg.html)

Catch Can Installed

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150516_072039_zpsd2mfhdxy.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150516_072039_zpsd2mfhdxy.jpg.html)
Car looks sick man

fg2taffysi
05-28-2015, 06:54 PM
Car looks sick man

thanks man!

Si Speed 317
05-29-2015, 11:06 AM
-4an fittings and hose on the speed factory racing coolant overflow

http://i213.photobucket.com/albums/cc150/fg2taffysi/bf905543-efff-449d-994e-87883b393813_zpsqchiipt8.jpg (http://s213.photobucket.com/user/fg2taffysi/media/bf905543-efff-449d-994e-87883b393813_zpsqchiipt8.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20150523_122056_zpsjhlys4sm.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20150523_122056_zpsjhlys4sm.jpg.html)

That is legit!!!

Sent from my SM-G900T using Tapatalk

fg2taffysi
05-29-2015, 11:31 AM
That is legit!!!

Sent from my SM-G900T using Tapatalk
Thanks man !

fg2taffysi
06-17-2015, 10:24 PM
Custom made a wire panel for Hondata flash pro and traction control

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150614_112412_zpsnsv92yeb.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150614_112412_zpsnsv92yeb.jpg.html)

Flash pro just mocked up, still need to mock up traction control and make grommets to hide all wires

http://i213.photobucket.com/albums/cc150/fg2taffysi/20150613_174246_zpsopjxdwaq.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20150613_174246_zpsopjxdwaq.jpg.html)

Si Speed 317
07-27-2015, 12:18 AM
Custom made a wire panel for Hondata flash pro and traction control

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150614_112412_zpsnsv92yeb.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150614_112412_zpsnsv92yeb.jpg.html)

Flash pro just mocked up, still need to mock up traction control and make grommets to hide all wires

http://i213.photobucket.com/albums/cc150/fg2taffysi/20150613_174246_zpsopjxdwaq.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20150613_174246_zpsopjxdwaq.jpg.html)

Interested to see how this comes out. Did you use 2 or 4 wheel speed sensors for TC?

BoostedK20
11-16-2015, 04:05 PM
http://m.memegen.com/4lg9em.jpg

PetefromtheStreets
11-16-2015, 11:09 PM
http://m.memegen.com/4lg9em.jpg

Truuuuuuuuu


Sent from my iPhone using Tapatalk

fg2taffysi
11-21-2015, 10:13 PM
HYBRID RACING COOLANT HOUSING CONVERTED TO -AN FITTINGS

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20151112_191636_zpsz3hjrnn9.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20151112_191636_zpsz3hjrnn9.jpg.html)

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20151112_191517_zpskeeej4gj.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20151112_191517_zpskeeej4gj.jpg.html)

fg2taffysi
11-21-2015, 10:17 PM
Speedfactory racing custom inline radiator fill with -16an fittings

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/IMG_20151110_101043_zpsiaguiouj.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/IMG_20151110_101043_zpsiaguiouj.jpg.html)

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20151109_200830_zpsc8bhrs81.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20151109_200830_zpsc8bhrs81.jpg.html)

fg2taffysi
11-21-2015, 10:20 PM
Hybrid Racing performance radiator cap
http://i723.photobucket.com/albums/ww236/MJNTHOMAS/IMG_20151117_193129_zpso85dj2ub.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/IMG_20151117_193129_zpso85dj2ub.jpg.html)

fg2taffysi
11-21-2015, 10:24 PM
Radiator fill attached to coolant housing http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20151118_184230_zpsrf3ror86.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20151118_184230_zpsrf3ror86.jpg.html)

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20151118_184322_zps5qbrw7sy.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20151118_184322_zps5qbrw7sy.jpg.html)

Spoolin_VTEC
11-23-2015, 10:22 PM
Any pics of those shiny part thangs installed?

fg2taffysi
11-29-2015, 09:23 PM
Any pics of those shiny part thangs installed?

Which parts where you referring to ?

Spoolin_VTEC
12-02-2015, 02:27 PM
All of your most recent parts posted in this thread

Si Speed 317
12-05-2015, 10:52 AM
Looks good man, car has made such a transformation over the past few years!

fg2taffysi
12-09-2015, 09:45 PM
I have some ill post soon, still waiting on some parts to install the rest, ill post pics once installed

fg2taffysi
12-09-2015, 09:46 PM
Looks good man, car has made such a transformation over the past few years!

Thanks man!

BoostedK20
12-09-2015, 11:04 PM
I have some ill post soon, still waiting on some parts to install the rest, ill post pics once installed


Thanks man!

Looking forward to your pictures! And agreed, your car sure had transformed!

Spoolin_VTEC
12-16-2015, 11:41 PM
Same here ^

fg2taffysi
01-18-2016, 10:02 PM
Downstar v2 hardware on mud flaps and fender liner

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/IMG_20150710_173914_zpsfmwzcjxh.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/IMG_20150710_173914_zpsfmwzcjxh.jpg.html)

fg2taffysi
01-18-2016, 10:03 PM
Cut and made brackets to mount the flash pro to the removable wire panel

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/IMG_20150705_225931_zps7rvsja7n.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/IMG_20150705_225931_zps7rvsja7n.jpg.html)

fg2taffysi
01-18-2016, 10:04 PM
Asp rear diffuser

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/InstaSize_2015_5%20_%202911611_zpsrwsa5hrv.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/InstaSize_2015_5%20_%202911611_zpsrwsa5hrv.jpg.htm l)

fg2taffysi
01-18-2016, 10:05 PM
http://i723.photobucket.com/albums/ww236/MJNTHOMAS/IMG_20150702_010553_zpsvmsrh50f.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/IMG_20150702_010553_zpsvmsrh50f.jpg.html)

fg2taffysi
01-18-2016, 10:09 PM
Looking forward to your pictures! And agreed, your car sure had transformed!

Thanks!!

fg2taffysi
01-18-2016, 10:10 PM
Same here ^

Soon car is apart and getting reassembled with new parts shortly!

monjarassi
01-18-2016, 10:12 PM
Wow good stuff

PetefromtheStreets
01-19-2016, 10:28 AM
Clean as always man. I'm loving it.


Sent from my iPhone using Tapatalk

fg2taffysi
01-20-2016, 10:46 PM
Clean as always man. I'm loving it.


Sent from my iPhone using Tapatalk

thanks! i got a pile of stuff to install and fab up pictures to come soon

fg2taffysi
01-20-2016, 10:47 PM
thanks man!

fg2taffysi
01-22-2016, 10:23 PM
Downstar hardware for the doorjambs, bumper and trunk

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20150522_154944_zpssdgeeeaq.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20150522_154944_zpssdgeeeaq.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20150522_165903_zpshyc374gf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20150522_165903_zpshyc374gf.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20150522_165953_zps1vy4mvep.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20150522_165953_zps1vy4mvep.jpg.html)

fg2taffysi
01-22-2016, 10:34 PM
Downstar hardware on air bag sensors, fender support bracket and bumper beam

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20160114_213639_zpskocyyvm2.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20160114_213639_zpskocyyvm2.jpg.html)

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20160114_2136590_zpsdzmkiwtk.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20160114_2136590_zpsdzmkiwtk.jpg.html)

http://i723.photobucket.com/albums/ww236/MJNTHOMAS/20160114_213706-1_zps58mkwtpl.jpg (http://s723.photobucket.com/user/MJNTHOMAS/media/20160114_213706-1_zps58mkwtpl.jpg.html)

BoostedK20
01-24-2016, 09:03 PM
Hardware is a nice upgrade!!

fg2taffysi
02-05-2016, 01:10 PM
Push 2 Start in OEM switch panel

http://i213.photobucket.com/albums/cc150/fg2taffysi/20160131_181713_zpsgppuqzhf.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20160131_181713_zpsgppuqzhf.jpg.html)

http://i213.photobucket.com/albums/cc150/fg2taffysi/20160131_181640_zpswbojaiph.jpg (http://s213.photobucket.com/user/fg2taffysi/media/20160131_181640_zpswbojaiph.jpg.html)

fg2taffysi
02-07-2016, 02:13 PM
Fabricated custom brackets for the new radiator setup

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20160207_131003_zpspjbljvwk.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20160207_131003_zpspjbljvwk.jpg.html)

BoostedK20
02-10-2016, 03:03 PM
Loving the push to start button and brackets!

fg2taffysi
06-01-2016, 09:32 PM
Hybrid Racing coolant housing with a custom Speedfactory Racing inline radiator fill with Hybrid Racing radiator cap

http://i213.photobucket.com/albums/cc150/fg2taffysi/DSC_0027_zpsmupvyxtz.jpg (http://s213.photobucket.com/user/fg2taffysi/media/DSC_0027_zpsmupvyxtz.jpg.html)

fg2taffysi
06-01-2016, 09:35 PM
shaved the hood prop bracket and water neck fill on the radiator support and powder coated silver vein


http://i213.photobucket.com/albums/cc150/fg2taffysi/6b589c54-3723-450d-8ab7-221e77fb4e95_zpssnkt2jzz.jpg (http://s213.photobucket.com/user/fg2taffysi/media/6b589c54-3723-450d-8ab7-221e77fb4e95_zpssnkt2jzz.jpg.html)

fg2taffysi
06-01-2016, 09:39 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/15cbdc5b-f9c1-4ecc-a165-86b53412498d_zpsvasjcdu0.jpg (http://s213.photobucket.com/user/fg2taffysi/media/15cbdc5b-f9c1-4ecc-a165-86b53412498d_zpsvasjcdu0.jpg.html)

fg2taffysi
06-01-2016, 09:44 PM
http://i213.photobucket.com/albums/cc150/fg2taffysi/c7c4118e-944c-48c7-b4d7-66ae3bac5d1c_zpsep2zzccr.jpg (http://s213.photobucket.com/user/fg2taffysi/media/c7c4118e-944c-48c7-b4d7-66ae3bac5d1c_zpsep2zzccr.jpg.html)

fg2taffysi
06-01-2016, 09:49 PM
DP Race scatter shield

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20160527_153914_zpsuwunxdsm.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20160527_153914_zpsuwunxdsm.jpg.html)

fg2taffysi
06-01-2016, 09:51 PM
Trac Tuff water by pass with -an fittings

http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20160524_230213_zpsscnfkyuw.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20160524_230213_zpsscnfkyuw.jpg.html)

fg2taffysi
06-01-2016, 09:54 PM
K Tuned Thermostat Housing with - an fittings


http://i213.photobucket.com/albums/cc150/fg2taffysi/IMG_20160524_230503_zpsh7ehvgn9.jpg (http://s213.photobucket.com/user/fg2taffysi/media/IMG_20160524_230503_zpsh7ehvgn9.jpg.html)

BoostedK20
06-07-2016, 08:30 AM
I must admit: your engine bay is clean af! #adminquotes