PDA

View Full Version : Ohio Checking In!



OMG_TRBO
06-16-2013, 09:55 PM
I posted this before but for some reason it didn't show up...

My name is Jason and I am located in the eastern suburbs of Cleveland.

Car is a 2011 Si

Built Bottom End
Wiseco Pistons 9.8:1 and 86.5mm Bore
Eagle Rods
GT3076R
TSI Log Manifold
Tuned By Vitviper

http://img.tapatalk.com/d/13/06/17/pepa6e8e.jpg

http://img.tapatalk.com/d/13/06/17/aze3eqyq.jpg

http://img.tapatalk.com/d/13/06/17/eju3agah.jpg

Si Speed 317
06-16-2013, 10:04 PM
Welcome! Rare to see a built motor with a log manifold. Black front mount makes it a real sleeper, and the CF fenders add a nice touch too. Red charge pipes and IM/VC look great! Someone likes to powdercoat ;)

How are your EGTs with your setup? And what are you putting down?

OMG_TRBO
06-16-2013, 10:19 PM
I don't have an EGT gauge in my downpipe so I don't really know what the temps are coming out. I started with the log manifold and am only keeping it until next spring, then switching over to a Full Race set up. Before I blew the motor up a couple months ago I was pushing just over 400 at 16.5psi, haven't finished tuning with the new set up yet, once I do I am gonna put it on the dyno at work.

Si Speed 317
06-16-2013, 11:14 PM
I don't have an EGT gauge in my downpipe so I don't really know what the temps are coming out. I started with the log manifold and am only keeping it until next spring, then switching over to a Full Race set up. Before I blew the motor up a couple months ago I was pushing just over 400 at 16.5psi, haven't finished tuning with the new set up yet, once I do I am gonna put it on the dyno at work.

Nice! That would definitely increase nicely in a tubular manifold. Sounds like fun, especially since your job has a dyno! I remember that piston pic, talk about crazy. Post some pics up of the blown motor and whatnot!

http://img.tapatalk.com/d/13/06/17/qudu5e5e.jpg

OMG_TRBO
06-17-2013, 09:48 AM
http://img.tapatalk.com/d/13/06/17/eha4ude3.jpg

http://img.tapatalk.com/d/13/06/17/nehepage.jpg

http://img.tapatalk.com/d/13/06/17/vu8edega.jpg

http://img.tapatalk.com/d/13/06/17/eze7agep.jpg

http://img.tapatalk.com/d/13/06/17/u9epy9eg.jpg

ksboi
06-17-2013, 10:34 AM
Very nice! Look at boostjunkyz kit also fyi. HOw do you like them CF fenders? I am just nervouse to have someone hit me and then I gotta go on a killing spree. OMG_TRBO

aLmk
06-17-2013, 11:48 AM
I posted this before but for some reason it didn't show up...

My name is Jason and I am located in the eastern suburbs of Cleveland.

Car is a 2011 Si

Built Bottom End
Wiseco Pistons 9.8:1 and 86.5mm Bore
Eagle Rods
GT3076R
TSI Log Manifold
Tuned By Vitviper

http://img.tapatalk.com/d/13/06/17/pepa6e8e.jpg

http://img.tapatalk.com/d/13/06/17/aze3eqyq.jpg

http://img.tapatalk.com/d/13/06/17/eju3agah.jpg
:wavey:

I was in your thread on 8th. Welcome to the boards! How do you like the motor so far? I'm looking to get some internal parts here soon to start building a motor for when this one dies.

OMG_TRBO
06-17-2013, 09:53 PM
I wish I could have built the motor under different circumstances, unexpected motor death on your daily driver is no fun. I like the motor, Vitviper is tuning it now, so should see 400 soon and have it be reliable once again!

OMG_TRBO
06-17-2013, 09:54 PM
Very nice! Look at boostjunkyz kit also fyi. HOw do you like them CF fenders? I am just nervouse to have someone hit me and then I gotta go on a killing spree. OMG_TRBO

The fenders are ok, they are from Seibon. They didn't line up very well, plus the drivers side sticks out further than the passenger side, with my OCD it really bothers me.

Si Speed 317
06-26-2013, 09:15 PM
I wish I could have built the motor under different circumstances, unexpected motor death on your daily driver is no fun. I like the motor, Vitviper is tuning it now, so should see 400 soon and have it be reliable once again!

It'll definitely be reliable. Don't worry about that. If you have quality parts, a proper install and a good tune, you'll be reliable. Of course, assuming you follow normal maintenance schedules. Are you running a catch can?

monjarassi
06-26-2013, 11:23 PM
nice

OMG_TRBO
06-30-2013, 09:47 PM
Makin The Turbo Spool!

http://img.tapatalk.com/d/13/07/01/y6amyteq.jpg

http://img.tapatalk.com/d/13/07/01/eryzabun.jpg

Si Speed 317
07-07-2013, 11:55 PM
More pics of the finalized setup! Hows the car running so far?

OMG_TRBO
07-13-2013, 07:13 PM
It's running, ok, made 350ish on the dyno yesterday... Really need that Full Race manifold in my life and also switch to a T3 turbine housing instead if this T25 Log manifold set up I have.

http://img.tapatalk.com/d/13/07/14/qezubube.jpg

http://img.tapatalk.com/d/13/07/14/2etebasy.jpg

http://img.tapatalk.com/d/13/07/14/aqety7u9.jpg

aLmk
07-14-2013, 11:40 AM
It's running, ok, made 350ish on the dyno yesterday... Really need that Full Race manifold in my life and also switch to a T3 turbine housing instead if this T25 Log manifold set up I have.

http://img.tapatalk.com/d/13/07/14/qezubube.jpg

http://img.tapatalk.com/d/13/07/14/2etebasy.jpg

http://img.tapatalk.com/d/13/07/14/aqety7u9.jpg
So you couldn't make any more power than with the stock motor? That sucks :( That manifold just doesn't quite flow enough for these k20s... I liked my log setup for its simplicity, but tubular is where it's at :thumb: Ever check out the synapse manifold?

OMG_TRBO
07-14-2013, 12:32 PM
Yea, I looked at it, price is pretty close, I run IWG and full race makes a manifold for that, plus I know the quality of full race so I am gonna go with that. I am shooting for a 450whp daily and maybe a 500-600 E85 tune for when I wanna get crazy.

aLmk
07-14-2013, 01:18 PM
Yea, I looked at it, price is pretty close, I run IWG and full race makes a manifold for that, plus I know the quality of full race so I am gonna go with that. I am shooting for a 450whp daily and maybe a 500-600 E85 tune for when I wanna get crazy.
So you're going to get an efr turbo? IDK how you can get your current turbo to work as an internally gated turbo in a T3 frame? From what I've seen, the GT turbos are only internally gated in a t25 frame.

OMG_TRBO
07-14-2013, 01:30 PM
This is what I found...

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-HSG-037&Category_Code=GTH

aLmk
07-14-2013, 01:35 PM
This is what I found...

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Code=ATP-HSG-037&Category_Code=GTH
Sweet! :thumb: That should be interesting!